Criminal Code Act 1995

Schedule - The Criminal Code  

Section 3

CHAPTER 4 - THE INTEGRITY AND SECURITY OF THE INTERNATIONAL COMMUNITY AND FOREIGN GOVERNMENTS  

Division 72 - Explosives and lethal devices  

Subdivision B - Plastic explosives  

SECTION 72.33   Marking requirements  

(1)    
This section sets out the 2 marking requirements for a plastic explosive.

Concentration of detection agent at time of manufacture

(2)    
The first marking requirement is that, at the time of the manufacture of the plastic explosive, all of the following conditions were satisfied:


(a) the plastic explosive contained a detection agent;


(b) the concentration of the detection agent in the plastic explosive was not less than the minimum manufacture concentration for the detection agent;


(c) the detection agent was homogenously distributed throughout the plastic explosive.

Note:

For minimum manufacture concentration , see section 72.34 .



Freshness

(3)    
the second marking requirement is that less than 10 years have elapsed since the manufacture of the plastic explosive.

Interpretation

(4)    
In determining whether a plastic explosive manufactured before the commencement of this section breached the first marking requirement, assume that this section and sections 72.34 and 72.36 had been in force at the time of manufacture.




This information is provided by CCH Australia Limited Link opens in new window. View the disclaimer and notice of copyright.