Edited version of your written advice

Authorisation Number: 1051221259375

Date of advice: 5 May 2017

Ruling

Subject: Early Stage Innovation Company

Question 1

Does Company meet the criteria of an ESIC under subsection 360-40(1) of the Income Tax Assessment Act 1997 (ITAA 1997)?

Answer

Yes

This ruling applies for the following periods:

1 July 2016 to 30 June 2017

The scheme commences on:

1 July 2016

Relevant facts and circumstances

1. The Company was incorporated in Australia on DDMMYY and registered on the Australian Business Register on DDMMYY.

2. The Company was not in existence and as such did not incur any expenses or derive any assessable income during the income year ending 30 June 2016. The company has no subsidiaries and is not a member of a consolidated group.

3. The Company is developing a new product.

4. The Company's initial addressable market will be Australian and New Zealand.

5. The Company has been allocated a Commercialisation Advisor under the Accelerating Commercialisation Program.

Relevant legislative provisions

Income Tax Assessment Act 1997 Subdivision 360-A

Income Tax Assessment Act 1997 section 360-40

Income Tax Assessment Act 1997 section 360-45.

Reasons for decision

Qualifying Early Stage Innovation Company

6. Subsection 360-40(1) outlines the criteria required for a company to qualify as an Early Stage Innovation Company (ESIC) at a particular time in an income year. This time is referred to as the test time (refer to Other relevant comments below for further note on 'test time'). The criteria are based on a series of tests to identify if the company is at an early stage of its development and it is developing new or significantly improved innovations to generate an economic return.

'The early stage test'

7. The early stage test requirements are outlined in detail within paragraphs 360-40(1)(a) to (d).

Incorporation or Registration - paragraph 360-40(1)(a)

8. To meet the requirement in paragraph 360-40(1)(a), at a particular time (the test time) in an income year (the current year) the company must have been either:

i. incorporated in Australia within the last three income years (the latest being the current year); or

ii. incorporated in Australia within the last six income years (the latest being the current year), and across the last three of those income years the company and its 100% subsidiaries incurred total expenses of $1 million or less; or

iii. registered in the Australian Business Register within the last three income years (the latest being the current year).

9. The term 'current year' is defined in subsection 360-40(1) with reference to the 'test time'; the 'current year' being the income year in which the company issues shares to the investor.

10. A company that does not meet any of these conditions will not qualify as an ESIC.

Total expenses - paragraph 360-40(1)(b)

11. To meet the requirement in paragraph 360-40(1)(b), the company and its 100% subsidiaries must have incurred total expenses of $1 million or less in the income year before the current year.

Assessable income - paragraph 360-40(1)(c)

12. To meet the requirement in paragraph 360-40(1)(c), the company and its 100% subsidiaries must have derived total assessable income of $200,000 or less in the income year before the current year.

No stock exchange listing - paragraph 360-40(1)(d)

13. To meet the requirement in paragraph 360-40(1)(d), the company must not be listed on any stock exchange in Australia or a foreign country.

Innovation tests

14. If the company satisfies the early stage test, the company must also satisfy one of two innovation tests: the objective (100 point) test or the principles-based test.

'100 point test' - paragraph 360-40(1)(e) and section 360-45

15. To satisfy the 100 point test the company must obtain at least 100 points by meeting the innovation criteria in the table within section 360-45. The criteria are tested at a time immediately after the relevant shares are issued. If a company satisfies this test it does not need to satisfy the principles-based test.

'Principles-based test' - subparagraphs 360-40(1)(e)(i) to (iv)

16. To satisfy the principles-based test, the company must meet five requirements in paragraph 360-40(1)(e). This is tested at a time immediately after the relevant new shares are issued to the investor.

17. The company can demonstrate that it meets each requirement through existing documentation such as a business plan, commercialisation strategy, competition analysis or other company documents. The company must be able to show that tangible steps have been or will be taken in relation to each of the requirements.

18. The five requirements of the principles-based test, as outlined in paragraph 360-40(1)(e) are:

i. the company must be genuinely focused on developing one or more new or significantly improved innovations for commercialisation

ii. the business relating to that innovation must have a high growth potential

iii. the company must demonstrate that it has the potential to be able to successfully scale up the business relating to the innovation

iv. the company must demonstrate that it has the potential to be able to address a broader than local market, including global markets, through that business, and

v. the company must demonstrate that it has the potential to be able to have competitive advantages for that business.

Developing new or significantly improved innovations for commercialisation

19. For the purposes of Subdivision 360-A, the Explanatory Memorandum to the Tax Laws Amendment (Tax Incentives for Innovation) Bill 2016 ('EM') provides the following at paragraph 1.76 in relation to the definition of innovation:

“Implicit in the definition of innovation is the requirement that the company is developing a new or significantly improved type of innovation such as a product, process, service, marketing or organisational method. This list of various types of innovations provides flexibility for innovation companies and is adaptable to current and future innovations. The Oslo Manual, published by the Organisation for Economic Co-operation and Development (OECD) provides a description of these different types of innovations…”

20. The innovation being developed by the company must either be new or significantly improved for an applicable addressable market. The company's addressable market is the revenue opportunity or market demand arising from the innovation or the related business. The addressable market must be objective and realistic.

21. Improvements must be significant in nature to meet this requirement. Customising existing products or minor changes resulting from software updates, pricing strategies or seasonal changes are examples of improvements that would not be considered significant.

22. The OECD Oslo Manual defines innovations as significant changes, with the intention of distinguishing significant changes from routine minor changes. However, it is important to recognise that an innovation can also consist of a series of smaller incremental changes that together constitute a significant change.

23. In discussing services innovation activity, paragraph 111 of the OECD Oslo Manual states,

“Innovation activity in services also tends to be a continuous process, consisting of a series of incremental changes in products and processes. This may occasionally complicate the identification of innovations in services in terms of single events, i.e. as the implementation of a significant change in products, processes or other methods.”

24. The OECD Oslo Manual, in relation to defining innovative services, states at paragraph 161 that “innovations in services can include significant improvements in how they are provided (for example, in terms of their efficiency or speed), the addition of new functions or characteristics to existing services, or the introduction of entirely new services.”

25. The company must be genuinely focused on developing the innovation for a commercial purpose in order to generate economic value and revenue for the company. That is, the central activities of the Company must be truly concentrated on developing their innovation for a commercial purpose. This requirement draws the distinction between simply having an idea and commercialising an idea.

26. 'Commercialisation' includes a range of activities that involve the implementation or sale of a new or significantly improved innovation that will directly lead to the generation of economic value for the company.

High growth potential

27. The company must be able to demonstrate that it has the potential for high growth within a broad addressable market. This refers to the company's ability to rapidly expand its business. Companies that are limited to supplying local customers will not meet this requirement.

Scalability

28. The company must be able to demonstrate that it has the potential to successfully scale up the business. The company must have operating leverage, where as it increases its market share or enters into new markets, its existing revenues can be multiplied with a reduced or minimal increase in operating costs per unit.

Broader than local market

29. The company must be able to demonstrate that it has the potential to address a market that is broader than a local city, area or region. The company does not need to have a serviceable market at a national, multinational or global scale at the test time. However, it does need to show that the business is capable of addressing a market that is broader than a local market and that the business can be adapted to a broader scale in the future.

Competitive advantages

30. The company must be able to demonstrate that it has the potential to have competitive advantages, such as a cost or differential advantage over its competitors which are sustainable for the business as it expands. The company can analyse what competitors in the market offer, and consider whether the company has a differentiating advantage that would allow it to outperform these competitors.

Application to your circumstances

Test time

31. For the purposes of this ruling, the test time for determining if the Company is a qualifying ESIC will be a particular date during the income year ending 30 June 2017.

Current year

32. For the purposes of subsection 360-40(1), the current year will be the year ending 30 June 2017 (the 2017 income year). For clarity, in relation to particular requirements within subsection 360-40(1), the last three income years will include the years ending 30 June 2017, 2016 and 2015, and the income year before the current year will be the year ending 30 June 2016 (the 2016 income year).

Early stage test

Incorporation or Registration - paragraph 360-40(1)(a)

33. As the Company was incorporated on DDMMYY, which is within the last 3 income years, subparagraph 360-40(1)(a)(i) satisfied.

Total expenses - paragraph 360-40(1)(b)

34. As the Company was incorporated in the current year, the requirement in paragraph 360-40(1)(b) is satisfied.

Assessable income - paragraph 360-40(1)(c)

35. As the Company was incorporated in the current year, no assessable income was derived for the prior income year, paragraphs 360-40(1)(c) is satisfied.

No stock exchange listing - paragraph 360-40(1)(d)

36. As the Company is privately owned and is not listed on any stock exchange in Australia or a foreign country, subparagraph 360-40(1)(d) is satisfied.

Conclusion on early stage test

37. The Company will satisfy the early stage test for the entire 2017 income year, as each of the requirements within paragraphs 360-40(1)(a) to (d) have been satisfied.

100 point test

38. The Company has not provided any evidence of satisfying the 100 point test under section 360-45 for the year ending 30 June 2017. For the Company to be a qualifying ESIC it will need to satisfy the principles-based test.

Principles based test

Developing new or significantly improved innovations for commercialisation - subparagraph 360-40(1)(e)(i)

Genuinely focussed on developing for commercialisation - subparagraph 360-40(1)(e)(i)

39. You are expecting to have a fully developed 'in market' version of the product by the end of mid-late 2017. You have provided us with a list of additional steps required to completely commercialise the service, achieve product-market fit and achieve its growth and traction targets.

40. The facts provided demonstrate that you have taken tangible steps to lead to the sale of its product. You are genuinely focussed on developing the product for a commercial purpose.

41. Therefore, subparagraph 360-40(1)(e)(i) will be satisfied for the time period from 1 July 2016 until 30 June 2017 or the date when the product has been fully developed, whichever occurs earliest. Once the product has been fully developed, the Company will no longer be 'developing' the product for commercialisation and subparagraph 360-40((1)(e)(i) will no longer be satisfied.

The addressable market

42. Based on the details you provided we are of the view the addressable market is the Australian market.

High growth potential - subparagraph 360-40(1)(e)(ii)

43. The Company has a strategy that sets out the tangible steps that will be taken, or have been taken, to capitalise on the growth opportunities in the Australian market.

44. The information you provided outline factors which indicate that the Company has high growth potential.

45. The business relating to the product has the potential to rapidly expand its customer base across the Australian market.

46. Therefore, subparagraph 360-40(1)(e)(ii) will be satisfied.

Scalability - subparagraph 360-40(1)(e)(iii)

47. Under the proposed business model the Company will issue license to third party provider which is subject to an agreement for the use of the use and provision of the product to end users.

48. The Company's cashflow projection analysis shows that once the product is fully operational, the company is expecting to generate a positive and consistent revenue stream from October 2017. The projection also shows that costs of business generally remain the same albeit some slight increase in certain months.

49. As the Company business grows and expands under the proposed business model, there is potential for existing revenue increase with a minimal additional operating, marketing and administration costs. Therefore, the Company has the potential to increase revenue and scale its business, thereby satisfying the requirement in subparagraph 360-40(1)(e)(iii)

Broader than local market- subparagraph 360-40(1)(e)(iv)

50. The product being developed by the Company has the potential to service any number of prospective users and providers and not be limited to operators within the Australian market.

51. The Company's business model can easily be replicated in other markets both inside Australia and overseas with very little localisation or customisation required.

52. The Company has demonstrated that the product and the business model has the potential to address a broader market than just the local market, including international markets. Therefore, subparagraph 360-40(1)(e)(iv) will be satisfied.

Competitive advantages - subparagraph 360-40(1)(e)(v)

53. The product has a number of differentiating features which may give it a competitive advantage over its competitors.

54. Patent application has been lodged with IP Australia over the product which will provide the Company an advantage in enforcing its rights to protect its IP in the Australian market.

55. The management team of the Company have considerable experience and relationship with education content providers through which will generate further advantage for the business.

56. The Company has demonstrated the potential for their product to have competitive advantages in the Australian continuing professional development market, satisfying subparagraph 360-40-(1)(e)(v).

Conclusion on principles test

57. The Company satisfies the principles based test as it satisfies the requirements within subparagraphs 360-40(1)(e)(i) to (v) for the period commencing 1 July 2016 until 30 June 2017 or the date when the Company has been fully developed and is ready for sale, whichever occurs earlier.

Conclusion

The Company meets the eligibility criteria of an ESIC under section 360-40 for the period commencing 1 July 2016 until the earlier of 30 June 2017 or the date when the Innovation has been fully developed and is ready for sale, whichever occurs earlier.

Copyright notice

© Australian Taxation Office for the Commonwealth of Australia

You are free to copy, adapt, modify, transmit and distribute material on this website as you wish (but not in any way that suggests the ATO or the Commonwealth endorses you or any of your services or products).