OPS 2020/1

---

This legislative instrument has been repealed by F2020L01297 - registered on 12 October 2020.
This legislative instrument replaces and repeals F2019L00894.

Taxation Administration Act 1953

I, John Ford, Deputy Commissioner of Taxation, make this determination under section 15-25 of Schedule 1 to the Taxation Administration Act 1953.

Legislative Instrument

1. Name of instrument

This determination is the Taxation Administration Act Withholding Schedules 2020.

2. Commencement

This instrument commences on 1 July 2020.

3. Repealing of existing instruments

This instrument repeals legislative instrument Taxation Administration Act Withholding Schedules 2019 - F2019L00894, registered on 27 June 2019.

4. Purpose

(a) Withholding schedules specify the formulas and procedures to be used for working out the amount to be withheld by an entity from a withholding payment covered by Subdivision 12-B, 12-C or 12-D of Schedule 1 to the Taxation Administration Act 1953.

(b) The withholding schedules in this instrument are made for the purposes of collecting income tax, Medicare levy and amounts of liabilities to the Commonwealth under the Higher Education Support Act 2003, the Trade Support Loans Act 2014, the social Security Act 1991 and the Student Assistance Act 1973.

5. Withholding schedules

Each of the withholding schedules listed in the following table, has effect from the date of commencement of this instrument:

These Schedules are available on the ATO website, ato.gov.au/taxtables

Schedule 1 - Statement of formulas for calculating amounts to be withheld

For payments made on or after 1 July 2018

This document is a withholding schedule made by the Commissioner of Taxation in accordance with sections 15-25 and 15-30 of Schedule 1 to the Taxation Administration Act 1953 (TAA). It applies to withholding payments covered by Subdivisions 12-B (except sections 12-50 and 12-55), and 12-D of Schedule 1 to the TAA.

Using this schedule

If you develop your own payroll software package, this schedule provides the formulas that you will need to calculate the amounts to be withheld from payments made on a weekly, fortnightly, monthly or quarterly basis.

To assist employers who do not have a payroll software package our website makes available:

•

a tax withheld calculator, and

•

tax tables

which are based on the formulas in this schedule.

Payments covered include:

•

salary, wages, allowances and leave loading paid to employees

•

paid parental leave

•

directors' fees

•

salary and allowances paid to office holders (including members of parliament, statutory office holders, defence force members and police officers)

•

payments to labour hire-workers

•

payments to religious practitioners

•

government pensions

•

government education or training payments

•

compensation, sickness or accident payments that are calculated at a periodical rate and made because a person is unable to work (unless the payment is made under an insurance policy to the policy owner).

Do not use this schedule for payments made to individuals employed under a working holiday makers visa. You must use the Tax table for working holiday makers for all payments made to them, including lump sum payments.

See also

You can download a printable version of Statement of formulas for calculating amounts to be withheld (NAT 1004) in Portable Document Format (PDF).

Coefficients for calculation of amounts to be withheld (withholding amounts) from weekly payments

Notes

1. If you have 27 fortnightly, or 53 weekly pays in a financial year, refer to withholding additional amounts from employee earnings.

2. Scales 1, 2, 3, 5 and 6 may be applied only where employees have provided their TFN.

3. For scale 4 no coefficients are necessary. To calculate withholding, apply the tax rate to earnings, ignoring any cents in earnings and in the withholding result.

4. Scale 1 and 2 apply whether or not the employee is entitled to any leave loading.

5. Tax offsets may be allowed only where scales 2, 5 or 6 are applied.

6. Scale 1, 2, 4 and 6 incorporate the Medicare levy. Scale 4 incorporates the Medicare levy for residents only.

7. For scale 2 no Medicare levy is payable by a person whose taxable income for the year is $21,980 ($422 per week) or less. Where the taxable income exceeds $21,980 but is less than $27,475 ($528 per week), the levy is shaded in at the rate of 10% of the excess over $21,980. Where a person's taxable income is $27,475 ($528 per week) or more, Medicare is levied at the rate of 2% of total taxable income.

8. The Medicare levy is also shaded in for scale 6. The Medicare levy parameters for scales 2 and 6 are as follows:

About this schedule

Amounts to be withheld from payments made weekly, fortnightly, monthly and quarterly, as set out in the relevant PAYG withholding tax table, can be calculated using the formulas and coefficients contained in this schedule.

Separate formulas apply to:

•

employees who have not claimed the tax-free threshold

•

foreign residents

•

employees claiming a full exemption from Medicare levy

•

employees claiming a half exemption from Medicare levy

•

employees who have claimed the tax-free threshold.

Find out about

•

Tax file number (TFN) declarations

•

Withholding declarations

•

Allowances

•

Holiday pay, long service leave and employment termination payments

•

Claiming tax offsets

•

Medicare levy adjustment

Using a formula

The formulas comprise linear equations of the form y = ax - b, where:

•

y is the weekly withholding amount expressed in dollars

•

x is the number of whole dollars in the weekly earnings plus 99 cents

•

a and b are the values of the coefficients for each set of formulas for each range of weekly earnings (or, in the case of fortnightly, monthly or quarterly earnings, the weekly equivalent of these amounts).

The formulas relate only to the calculation of withholding amounts before any tax offsets and Medicare levy adjustments are allowed. For instructions on the treatment of tax offsets and Medicare levy adjustments, refer to Tax offsets and Medicare levy adjustment.

For sample data to verify that the software program is calculating the correct withholding amounts and Medicare levy adjustments, see Withholding amounts and Medicare levy adjustments.

Withholding amounts calculated using these formulas may vary slightly to those calculated using the method set out in the footnote to the appropriate PAYG withholding tax table. This applies if earnings exceed $3,275 weekly or $6,550 fortnightly.

Rounding of withholding amounts

Withholding amounts calculated as a result of applying the above formulas are rounded to the nearest dollar. Values ending in 50 cents are rounded to the next higher dollar. Do this rounding directly - that is, do not make a preliminary rounding to the nearest cent.

Use these rounding rules across all scales except scale 4 (where employee does not provide a TFN). For scale 4, cents are ignored when applying the tax rate to earnings and when withholding amounts are calculated.

When there are 53 pays in a financial year

In some years, you may have 53 pays instead of the usual 52. As this schedule is based on 52 pays, the extra pay may result in insufficient amounts being withheld. You should let your employees know when this occurs so if they are concerned about a shortfall in tax withheld, they can ask you to withhold the additional amount in the table below.

When there are 27 pays in a financial year

In some years, you may have 27 pays instead of the usual 26. As this schedule is based on 26 pays, the extra pay may result in insufficient amounts being withheld. You should let employees know when this occurs so if they are concerned about a shortfall in tax withheld, they can ask you to withhold the additional amounts in the table below.

Working out the weekly earnings

The method of working out the weekly earnings (x) for the purpose of applying the formulas is as follows:

Example

Weekly income	$467.59
Add allowance subject to withholding	$ 9.50
Total earnings (ignore cents)	$477.00
Add 99 cents	$0.99
Weekly earnings	$477.99

Calculating withholding fortnightly, monthly or quarterly amounts

First calculate the weekly equivalent of fortnightly, monthly or quarterly earnings. If you pay:

•

fortnightly - divide the sum of the fortnightly earnings and the amount of any allowances subject to withholding by two. Ignore any cents in the result and then add 99 cents.

•

monthly - obtain the sum of the monthly earnings and the amount of any allowances subject to withholding (if the result is an amount ending in 33 cents, add one cent), multiply this amount by three and then divide by 13. Ignore any cents in the result and then add 99 cents.

•

quarterly - divide the sum of the quarterly earnings and the amount of any allowances subject to withholding by 13. Ignore any cents in the result and then add 99 cents.

Then calculate fortnightly, monthly or quarterly withholding amounts as follows:

•

fortnightly - work out the rounded weekly withholding amount applicable to the weekly equivalent of earnings, before any adjustment for tax offsets. Multiply this amount by two.

•

monthly - work out the rounded weekly withholding amount applicable to the weekly equivalent of earnings, before any adjustment for tax offsets. Multiply this amount by 13, divide the product by three and round the result to the nearest dollar.

•

quarterly - work out the rounded weekly withholding amount applicable to the weekly equivalent of earnings, before any adjustment for tax offsets. Multiply this amount by 13.

Tax offsets

The withholding amount calculated using scales 2, 5 or 6 of the formulas is reduced as follows:

•

weekly - 1.9% of the total amount claimed at the tax offsets questions on the Withholding declaration (NAT 3093), rounded to the nearest dollar

•

fortnightly - 3.8% of the total amount claimed at the tax offsets questions on the Withholding declaration, rounded to the nearest dollar

•

monthly - 8.3% of the total amount claimed at the tax offsets questions on the Withholding declaration, rounded to the nearest dollar

•

quarterly - 25% of the total amount claimed at the tax offsets questions on the Withholding declaration, rounded to the nearest dollar.

Medicare levy adjustment

A Medicare levy adjustment is not allowed where withholding amounts have been calculated using scales 1, 3, 4 or 5. The amount obtained using scales 2 or 6 (after allowing for any tax offsets) is reduced by any amount of Medicare levy adjustment applicable.

When an employee is entitled to an adjustment

An employee who has lodged both a completed Withholding declaration and a Medicare levy variation declaration, may be entitled to a Medicare levy adjustment if they have weekly earnings of one of the following:

•

$422 or more where scale 2 is applied

•

$713 or more where scale 6 is applied.

To claim the adjustment, the employee must answer yes to question 10 and yes to question 9, and/or question 12 on the Medicare levy variation declaration.

Calculating the Medicare levy adjustment

To calculate the Medicare levy adjustment, your software package will need to be able to distinguish those employees who have answered yes to question 9 and no to question 12 on the Medicare levy variation declaration.

Where employees have answered yes to question 12, the software must be able to store the number of dependants shown at this question on the declaration.

You will need to calculate the weekly family threshold and shading out point (SOP) before calculating the weekly levy adjustment for employees with weekly earnings of one of the following:

•

$528 or more where scale 2 is applied

•

$891 or more where scale 6 is applied.

Values used in the calculations may be regarded as variables.

Weekly family threshold (WFT)

Where scale 2 or scale 6 is applied

Where an employee has answered yes to question 9 and no to question 12 on the Medicare levy variation declaration:

-

WFT = $713.25 (37,089 ÷ 52) (rounded to the nearest cent).

Where an employee has answered yes to question 12 on the Medicare levy variation declaration, you need to:

a.

multiply the number of children shown at question 12 by 3,356 and add the result to 37,089

b.

divide the result of (a) by 52

c.

round the result of (b) to the nearest cent.

Example

If the employee has shown two dependent children at question 12:

WFT = ([3,406 × 2] + 37,089) ÷ 52

WFT = WFT = 844.2500 or $844.25 (rounded to the nearest cent)

Shading Out Point (SOP)

The SOP relative to an employee's WFT is calculated as follows:

Multiply WFT by 0.1 and divide the result by 0.0800. Ignore any cents in the result.

Example

Employee has shown six dependent children at question 12 and scale 2 is applied:

WFT = ([3,406 × 6] + 37,089) ÷ 52

WFT = 1,106.2500 or $1,106.25 (rounded to the nearest cent)

SOP = (WFT × 0.1) ÷ 0.0800

SOP = ($1,106.25 × 0.1) ÷ 0.0800

SOP = 1,382.8125 or $1,382 (ignoring cents)

Weekly Levy Adjustment (WLA)

Where scale 2 is applied

Where weekly earnings are $422 or more but less than the SOP, the WLA is derived by applying the weekly earnings (x) expressed in whole dollars plus an amount of 99 cents (refer to Working out the weekly earnings), in the following formulas:

1.

If x is less than $528, WLA = ( x - 422.69) × 0.1

2.

If x is $528 or more but less than WFT, WLA = x × 0.0200

3.

If x is equal to or greater than WFT and less than the SOP, WLA =
(WFT × 0.0200) - ([ x - WFT] × 0.0800)

In each case WLA should be rounded to the nearest dollar.

Values ending in 50 cents should be rounded to the next higher dollar.

Examples

Example 1

Employee's weekly earnings are $465.33 and scale 2 is applied.

x = 465.99

As x is less than $528, WLA is calculated using formula (1):

WLA = (465.99 - 422.69) × 0.1
= 4.3300 or $4.00 (rounded to the nearest dollar).

Example 2

Employee's weekly earnings are $892.47 and the number of children claimed at question 12 is three. Scale 6 is applied.

x = 892.99
WFT = ([3,406 × 3] + 37,089) ÷ 52
= 909.7500 or $909.75 (rounded to the nearest cent)

As x is greater than $891 and less than WFT, WLA is calculated using formula (2):

WLA = 802.99 × 0.01
= 8.9299 or $9.00 (rounded to the nearest dollar).

Example 3

Employee's weekly earnings are $982.29 and the number of children claimed at question 12 is four. Scale 2 is applied.

x = 982.99
WFT = ([3,406 × 4] + 37,089) ÷ 52
= 975.2500 or $975.25 (rounded to the nearest cent).

SOP = (975.25 × 0.1) ÷ 0.08
= 1,219.0625 or $1,219 (ignoring cents).

As x is greater than WFT and less than SOP, WLA is calculated using formula (3):

WLA = (975.25 × 0.020) - ([982.99 ? 975.25] × 0.0800)
= 18.8858 or $19.00 (rounded to the nearest dollar)

Fortnightly levy adjustment

Multiply rounded weekly levy adjustment by two.

Example

Employee's fortnightly earnings are $1,595.52 and the number of children claimed at question 12 is one. Scale 2 is applied.

Equivalent weekly earnings = $1,595.52 ÷ 2
= $797.76

x = 797.99

WFT = ([3,406 × 1] + 37,089) ÷ 52
= 778.7500 or $778.75 (rounded to the nearest cent).

SOP = (778.75 × 0.1) ÷ 0.08
= 973.4375 or $973 (ignoring cents).

As x is greater than WFT and less than SOP, formula (3) is used:

WLA = (778.75 × 0.020) - ([797.99 ? 778.75] × 0.0800)
= 14.0358 or $14.00 (rounded to the nearest dollar).

The fortnightly levy adjustment is therefore $28.00 ($14.00 × 2)

Monthly levy adjustment

Multiply rounded weekly levy adjustment by 13 and divide the result by three. The result should be rounded to the nearest dollar.

Example

Employee's monthly earnings are $2,800.33 and has a spouse but no children. Scale 2 is applied.

Equivalent weekly earnings = ($2,800.33 + 0.01) × 3 ÷ 13
= $646.23

x = 646.99

WFT = $713.25

As x is greater than $528 and less than WFT, formula (2) applies:

WLA = 646.99 × 0.0200 = 12.9398 or $13.00 (rounded to the nearest dollar).

The monthly adjustment is therefore $56.00 ($13.00 × 13 ÷ 3, rounded to the nearest dollar).

Quarterly levy adjustment

Multiply rounded weekly levy adjustment by 13

General examples

Example 1

Employee's weekly earnings are $1,103.45. Employee has completed a Tax file number declaration claiming the tax-free threshold. The employee has also provided a Medicare levy variation declaration with five children shown at question 12.

Therefore, scale 2 is applied.

x = 1103.99

Weekly withholding amount (y)
= ( a × x ) - b
= (0.3477 × 1103.99) - 165.4425
= 218.4150 or $218.00 (rounded to nearest dollar)

Levy adjustment: weekly earnings are greater than WFT ($1,040.75) and less than the SOP ($1,300) appropriate to employee with five children. Formula (3) applies.
= (1,040.75 × 0.0200) - ([1,103.99 ? 1,040.75] × 0.0800)
= 20.8150 ? 5.0592
= 15.7558 or $16.00 (rounded to nearest dollar)

Net weekly withholding amount
$218.00 ? $16.00 = $202.00

Example 2

Employee's fortnightly earnings are $1,110.30. Employee resides in zone B, has provided a Tax file number declaration that claims the tax-free threshold and a Withholding declaration that claims zone and tax offsets at the tax offsets questions that totals $1,645. The employee has also lodged a Medicare levy variation declaration claiming a full exemption from the Medicare levy.

Therefore, scale 5 is applied.

Convert to weekly equivalent
= (1,110.30 ÷ 2)
= 555.15 or $555 (ignore cents)

x = 555.99

Weekly withholding amount (y)
= ( a × x ) - b
= (0.1900 × 555.99) - 67.4635
= 38.1746 or $38.00 (rounded to nearest dollar)

Fortnightly withholding amount
$38.00 × 2 = $76.00

Tax offsets claimed at the tax offsets questions on the Withholding declaration
= 3.8% of $1,645
= 62.5100 or $63.00 (rounded to nearest dollar)

Net fortnightly withholding amount
$76.00 - $63.00 = $13.00.

Example 3

Employee's monthly earnings are $4,316.33. Employee has provided a Tax file number declaration claiming the tax-free threshold and claimed a total tax offset of $1,365 at the tax offsets question on the Withholding declaration. The employee has one child but is not eligible for a Medicare levy adjustment. The weekly equivalent of the employee's earnings exceeds the Medicare levy SOP of $973 appropriate to an employee with one child.

Therefore, scale 2 is applied.

Convert to weekly equivalent
= ($4,316.33 + 0.01) × 3 ÷ 13
= 996.0785 or $996 (ignore cents)

x = 996.99

Weekly withholding amount (y)
= ( a × x ) - b
= (0.3477 × 996.99) - 165.4423
= 181.2111 or $181.00 (rounded to nearest dollar)

Monthly withholding amount
$181.00 × 13 ÷ 3 = $784.00 (rounded to nearest dollar)

Tax offset claimed
= 8.3% of $1,365
= 113.2950 or $113.00 (rounded to nearest dollar)

Net monthly withholding amount
$784.00 - $113.00 = $671.00

Calculating withholding amounts for payments made on a daily or casual basis

The withholding amounts shown in the Tax table for daily and casual workers can be expressed in a mathematical form, using the formulas and coefficients provided.

To work out withholding amounts using the formulas:

1.

Multiply earnings (ignoring any cents) by five to work out the weekly equivalent. Add 99 cents to the result.

2.

Calculate the weekly amount by applying the coefficients at:

-

Scale 1 where an employee is not claiming the tax-free threshold

-

Scale 2 where an employee is claiming the tax-free threshold.

3.

Round the result to the nearest dollar.

4.

Divide this amount by five to convert it to the daily equivalent.

5.

Round the daily withholding amount to the nearest dollar.

Where the employee is entitled to the seniors and pensioners tax offset, replace with the appropriate coefficients from Tax table for seniors and pensioners

Accounting software

Software written in accordance with the formulas in this schedule should be tested for accuracy against the sample data provided. The results obtained when using the coefficients in this schedule may differ slightly from the sums of the amounts shown in the PAYG tax tables. The differences result from the rounding of components.

Sample data

Weekly withholding amounts

Fortnightly withholding amounts

Monthly withholding amounts

Sample data - Scale 2

Sample data - Scale 6

Other statements of formulas

Statements of formulas for other classes of payees are also available. These include PAYG withholding:

•

Statement of formulas for calculating HELP, SSL, TSL and SFSS components

•

Tax table for individuals employed in the horticultural or shearing industry

•

Tax table for actors, variety artists and other entertainers

•

Tax table for seniors and pensioners

•

Tax table for working holiday makers.

Tax file number (TFN) declarations

The answers your employees provide on their Tax file number declaration determine the amount you need to withhold from their payments. A Tax file number declaration applies to any payments made after you receive the declaration. If you receive an updated declaration from an employee, it will override the previous one.

If an employee does not give you a valid Tax file number declaration within 14 days of starting an employer/employee relationship, you must complete a Tax file number declaration with all available details of the employee and send it to us.

When a TFN has not been provided

You must withhold 47% from any payment you make to a resident employee and 45% from a foreign resident employee, (ignoring any cents) if all of the following apply:

•

they have not quoted their TFN

•

they have not claimed an exemption from quoting their TFN

•

they have not advised you that they have applied for a TFN or have made an enquiry with us.

If an employee states at question 1 of the Tax file number declaration they have lodged a Tax file number - application or enquiry for individuals with us, they have 28 days to provide you with their TFN.

If the employee has not given you their TFN within 28 days, you must withhold 47% from any payment you make to a resident employee and 45% from a foreign resident employee (ignoring any cents) unless we tell you not to.

Do not allow for any tax offsets or Medicare levy adjustments. Do not withhold any amount for:

•

Higher Education Loan Program (HELP) debts

•

Student Start-up Loan (SSL) debts (includes ABSTUDY SSL debts)

•

Trade Support Loan (TSL) debts

•

Financial Supplement debts.

When your employee is a foreign resident

If your employee has answered no to the question 'Are you an Australian resident for tax purposes?' on their Tax file number declaration, you will need to use the foreign resident tax rates.

There are two ways you can withhold from a foreign resident's earnings:

•

If they have given you a valid TFN, use scale 3

•

If they have not given you a valid TFN, use scale 4.

Foreign residents cannot claim tax offsets to reduce withholding. If your foreign resident employee has claimed a tax offset on the Withholding declaration, don't make any adjustments to the amount you withhold.

Withholding declarations

An employee may use a Withholding declaration to advise you of a tax offset they choose to claim through reduced withholding from you.

Employees can also use a Withholding declaration to advise you of any changes to their situation that may affect the amount you need to withhold from their payments.

Changes that may affect the amount you need to withhold include:

•

becoming or ceasing to be an Australian resident for tax purposes

•

claiming or discontinuing a claim for the tax-free threshold

•

advising of a HELP, SSL, TSL or Financial Supplement debt, or changes to them

•

entitlement to a seniors and pensioners tax offset.

When your employee provides you with a Withholding declaration it will take effect from the next payment you make. If you receive an updated declaration from an employee, it will replace the previous one.

An employee must have provided you with a valid Tax file number declaration before they can provide you with a Withholding declaration.

When your employee has a HELP, SSL, TSL or Financial Supplement debt

If your employee has a HELP, SSL, TSL or Financial Supplement debt, you may need to withhold additional amounts from their payments. Your employee will need to notify you of this on their Tax file number declaration or Withholding declaration.

Next step:

To calculate additional withholding amounts for:

•

HELP, SSL or TSL debts, refer to either

-

HELP/SSL/TSL weekly tax table

-

HELP/SSL/TSL fortnightly tax table

-

HELP/SSL/TSL monthly tax table.

•

Financial Supplement debts, refer to either

-

SFSS weekly tax table.

-

SFSS fortnightly tax table

-

SFSS monthly tax table

•

Statement of formulas, refer to

-

Statement of formulas for calculating HELP, SSL, TSL and SFSS components

Employees who are entitled to a reduction of Medicare levy or do not have to pay the Medicare levy because of low family income, will not have to make a compulsory HELP, SSL, TSL or Financial Supplement repayment for that year. The exemption from making a compulsory HELP, SSL, TSL or Financial Supplement repayment may be claimed on the Medicare levy variation declaration.

Allowances

Generally, allowances are added to normal earnings and the amount to withhold is calculated on the total amount of earnings and allowances.

For more information, refer to Withholding from allowances.

Leave loading

If you pay leave loading as a lump sum, use Tax table for back payments, commissions, bonuses and similar payments to calculate withholding.

If you pay leave loading on a pro-rata basis, add the leave loading payment to earnings for that period to calculate withholding.

Holiday pay, long service leave and employment termination payments

Employees who continue working for you

You must include holiday pay (including any leave loading) and long service leave payments as part of normal earnings, except when they are paid on termination of employment.

For more information, see Withholding from leave payments for continuing employees.

Employees who stop working for you

This schedule does not cover any lump sum payments made to an employee who stops working for you.

If an employee has unused annual leave, leave loading or long service leave, refer to Tax table for unused leave payments on termination of employment.

Any other lump sum payments may be employment termination payments, refer to Tax table for employment termination payments.

Do not withhold any amount for HELP, SSL, TSL or Financial Supplement debts from lump sum termination payments.

Claiming tax offsets

If your employee chooses to claim their entitlement to a tax offset through reduced withholding, they must provide you with a Withholding declaration.

To work out the employee's annual tax offset entitlement into a weekly, fortnightly, monthly or quarterly amount, refer to Tax offsets.

Do not allow for any tax offsets if any of the following apply:

•

where no tax-free threshold is claimed

•

you are using foreign resident rates

•

when an employee does not provide you with their TFN.

Medicare levy adjustment

To claim the Medicare levy adjustment (available in certain situations), your employee must lodge a Medicare levy variation declaration with their Tax file number declaration.

Some employees may be liable for an increased rate of the Medicare levy surcharge as a result of the income for surcharge purposes tests. They can lodge a Medicare levy variation declaration, requesting you to increase the amount to be withheld from their payments.

Next step:

Medicare levy adjustment

Schedule 3 - Tax table for actors, variety artists and other entertainers

For payments made on or after 1 July 2018

This document is a withholding schedule made by the Commissioner of Taxation in accordance with sections 15-25 and 15-30 of Schedule 1 to the Taxation Administration Act 1953 (TAA). It applies to withholding payments covered by section 12-35 of Schedule 1 to the TAA.

See also:

•

Use the Withholding look-up tool to quickly work out the amount to withhold.

Using this schedule

You should use this schedule if you make payments to employees who are actors, variety artists and other entertainers who receive payments for their performances.

Do not use this schedule if you make payments to employees, or other individuals engaged under a contract, to perform in a promotional activity that is any one of the following:

•

conducted in the presence of an audience

•

intended to be communicated to an audience by print or electronic media

•

for a film or tape

•

for a television or radio broadcast.

For these types of payments the Commissioner has varied the rate of withholding to 20% of the payment. For more information refer to Performing artists contracted to perform promotional activity.

If you employ individuals under a working holiday makers visa you must use the Tax table for working holiday makers for all payments made to them, including lump sum payments.

For all other relevant employees, refer to PAYG withholding Weekly tax table or Fortnightly tax table.

Do not use this schedule for payments made to foreign residents engaged as contractors. These payments are subject to foreign resident withholding. For more information refer to Foreign resident entertainment, sports, construction and casino gaming activities.

Next step:

You can download a printable version of the Tax table for actors, variety artists and other entertainers (NAT 1023) in Portable Document Format (PDF).

Working out the withholding amount

This schedule is only applicable to those who have three performances per week and have claimed the tax-free threshold. If the number of performances per week is different, or the employee has not claimed the tax-free threshold, use the formulas to calculate withholding amounts.

To work out the amount you need to withhold using this schedule, you must:

1.

Ignore any cents, input the employee's daily earnings into the Withholding look-up tool and refer to the corresponding amount to be withheld in column 2.

2.

If the employee has claimed any tax offsets, see Claiming tax offsets to work out the daily value of the amount claimed. Subtract the daily value of the tax offsets from the amount found in step 1.

Example

An employee has claimed the tax-free threshold, earns $279.35 daily, works three performances this week and claims tax offsets of $500. Ignoring cents, input $279 into the Withholding look-up tool and refer to the corresponding amount to be withheld in column 2 of $24.00. Reduce this amount by the daily value of the tax offsets of $3.00 ($500 ÷ 52 ÷ 3 rounded to the nearest dollar).

The amount to withhold is $21.00 ($24.00 - $3.00).

Using a formula

The withholding amounts shown in this schedule can be expressed in a mathematical form.

If you have developed your own payroll software package, you can use the formulas and the coefficients outlined in table A and table B.

This section should be read with Statement of formulas for calculating amounts to be withheld.

The formulas comprise linear equations of the form y = ax - b where:

•

y is the weekly withholding amount expressed in dollars

•

x is the weekly earnings rounded down to whole dollars plus 99 cents, and

•

a and b are the values of the coefficient for the formulas as shown in tables A and B.

To work out withholding amounts using the formulas, you must:

1.

Ignore any cents, multiply the per performance earnings by the number of performances for the week to derive the weekly equivalent. Add 99 cents to the result.

2.

Calculate the weekly amount by applying the relevant coefficients from table A or B above, rounding to the nearest dollar.

3.

Divide this amount by the number of performances for the week to work out the per performance withholding amount. Multiply this amount by the number of performances per day to convert it to the daily earnings equivalent. Round the daily withholding amount to the nearest dollar.

If you pay your employees daily rather than per performance, the amount to withhold (including reductions for tax offsets) should be worked out on a daily basis.

Example

Sandra has two performances for the week, one on Thursday and one on Saturday. Sandra earns $500.35 for each performance. She has claimed the tax-free threshold.

1.

$500 × 2 = $1,000. Add 99 cents to the result = $1,000.99.

2.

$1,000.99 × 0.2782 - 165.4423 = $113.0331. Round to the nearest dollar = $113.

3.

$113 ÷ 2 = $56.50. Round to the nearest dollar = $57.

Therefore, the amount to withhold from each performance is $57. As there is only one performance per day, the daily withholding amount is the same as the per performance withholding amount.

Accounting software

Software written in accordance with the formulas in this schedule should be tested for accuracy against the Withholding look-up tool. The results obtained when using the coefficients in this schedule may differ slightly from the Withholding look-up tool. The differences result from the rounding of components.

Tax file number (TFN) declarations

The answers your employees provide on their Tax file number declaration determine the amount you need to withhold from their payments. A Tax file number declaration applies to any payments made after you receive the declaration. If you receive an updated declaration from an employee, it will override the previous one.

If an employee does not give you a valid Tax file number declaration within 14 days of starting an employer/employee relationship, you must complete Tax file number declaration with all available details of the employee and send it to us.

When a TFN has not been provided

You must withhold 47% from any payment you make to a resident employee and 45% from a foreign resident employee (ignoring any cents), if all of the following apply:

•

they have not quoted their TFN

•

they have not claimed an exemption from quoting their TFN

•

they have not advised you that they have applied for a TFN or have made an enquiry with us.

If an employee states at question 1 of the Tax file number declaration they have lodged a Tax file number - application or enquiry for individuals with us, they have 28 days to provide you with their TFN.

If an employee has not given you their TFN within 28 days, you must withhold 47% from any payment you make to a resident employee and 45% from a foreign resident employee (ignoring any cents) unless we tell you not to.

Do not allow for any tax offsets or Medicare levy adjustment. Do not withhold any amount for:

•

Higher Education Loan Program (HELP) debts

•

Student Start-up Loan (SSL) debts (includes ABSTUDY SSL debts)

•

Trade Support Loan (TSL) debts

•

Financial Supplement debts.

Claiming tax offsets

If your employee chooses to claim their entitlement to a tax offset through reduced withholding, they must provide you with a Withholding declaration.

If your employee claims a tax offset, reduce the amount to be withheld from their earnings per performance by the value of the tax offset. The per performance value is the tax offset amount claimed divided by 52, divided by the number of performances per week. Round to the nearest dollar.

Do not allow for any tax offsets if any of the following apply:

•

when no TFN has been provided

•

you are using foreign resident rates

•

the payee has not claimed the tax-free threshold.

Withholding declarations

An employee may use a Withholding declaration to advise you of a tax offset they choose to claim through reduced withholding from you. For more information, see Claiming tax offsets.

Employees can also use a Withholding declaration to advise you of any changes to their situation that may affect the amount you need to withhold from their payments.

Changes that may affect the amount you need to withhold include:

•

becoming or ceasing to be an Australian resident for tax purposes

•

claiming or discontinuing a claim for the tax-free threshold

•

advising of a HELP, SSL, TSL or Financial Supplement debt, or changes to them.

When your employee provides you with a Withholding declaration it will take effect from the next payment you make. If you receive an updated declaration from an employee, it will replace the previous one.

An employee must have provided you with a valid Tax file number declaration before they can provide you with a Withholding declaration.

When your employee is a foreign resident

If your employee has answered no to the question 'Are you an Australian resident for tax purposes?' on their Tax file number declaration, you will need to use the foreign resident tax rates.

There are two ways you can withhold from a foreign resident's earnings:

•

if they have not given you a valid TFN, you need to withhold 45% for each $1 of earnings (ignoring any cents).

•

if they have given you a valid TFN, you need to withhold the amount calculated using the foreign resident tax rates, rounding any cents to the nearest dollar.

Foreign residents cannot claim tax offsets to reduce withholding. If your foreign resident employee has claimed a tax offset on the Withholding declaration, don't make any adjustments to the amount you withhold.

Schedule 4 - Tax table for return to work payments

For payments made on or after 1 July 2018

This document is a withholding schedule made by the Commissioner of Taxation in accordance with sections 15-25 and 15-30 of Schedule 1 to the Taxation Administration Act 1953 (TAA). It applies to withholding payments covered by section 12-50 of Schedule 1 to the TAA.

Using this schedule

You should use this schedule if you pay an individual to resume working for, or providing services to, you or any other entity.

If you employ individuals under a working holiday makers visa you must use the Tax table for working holiday makers for all payments made to them, including return to work payments.

We have a calculator to help you work out the correct amount of tax to withhold from payments to most employees. To access the calculator, refer to Tax withheld calculator.

Working out the withholding amount

To work out the amount you need to withhold, multiply the amount of the return to work payment by 34.5% (32.5% + 2.0% Medicare levy).

Example

George previously worked for IT Services Pty Ltd. Due to a shortage in IT personnel, IT Services Pty Ltd offered George a position if he would return to work for it.

He was paid $18,000 to start work, in addition to his salary.

The total amount IT Services Pty Ltd must withhold from the return to work payment is 34.5% × $18,000 = $6,210.

Rounding of withholding amounts

Withholding amounts calculated should be rounded to the nearest dollar. Results ending in 50 cents are rounded to the next higher dollar.

Tax file number declarations

The answers your employees provide on their Tax file number declaration (NAT 3092) determine the amount you need to withhold from their payments. A Tax file number declaration applies to payments made after you receive the declaration. If you receive an updated declaration from an employee, it will override the previous one.

If an employee does not give you a valid Tax file number declaration within 14 days of starting an employer/employee relationship, you must complete a Tax file number declaration with all available details and send it to us.

When a TFN has not been provided

You must withhold 47% from any payment you make to a resident employee and 45% from a foreign resident employee (ignoring any cents) if all of the following apply:

•

they have not quoted their tax file number (TFN)

•

they have not claimed an exemption from quoting their TFN

•

they have not advised you that they have applied for a TFN or made an enquiry with us.

If an employee states at question 1 of the Tax file number declaration they have lodged a Tax file number - application or enquiry for individuals (NAT 1432), they have 28 days to give you their TFN.

If the employee has not given you their TFN within 28 days, you must withhold 47% from any payment made to a resident employee and 45% from any payment made to a foreign resident employee (ignoring any cents) unless we tell you not to.

Schedule 5 - Tax table for back payments, commissions, bonuses and similar payments

For payments made on or after 1 July 2018

Withholding limit

There is a withholding limit of 47% on tax withheld from any additional payments calculated using an annualised method.

Applying this withholding limit may result in withholding not being sufficient to cover some employees' end of year tax liability. In these situations, an employee can ask their employer to increase their withholding for the remainder of the financial year.

This document is a withholding schedule made by the Commissioner of Taxation in accordance with sections 15-25 and 15-30 of Schedule 1 to the Taxation Administration Act 1953. It applies to certain withholding payments covered by Subdivisions 12-B (except sections 12-50 and 12-55), 12-C (except sections 12-85 and 12-90) and 12-D of Schedule 1 paid as a lump sum.

Using this schedule

Use this schedule if you make a payment of salary or wages which is:

•

a back payment (including lump sum payments in arrears)

•

a commission

•

a bonus or similar payment.

If you employ individuals under a working holiday makers visa you must use the Tax table for working holiday makers for all payments made to them, including back payments, commissions and bonuses or similar payments.

Other payments you should use this tax table for

These payments include back payments of:

•

compensation or sickness or accident payments for an incapacity for work that are not tax exempt

•

Australian Government education or training payments - for example, Austudy or ABSTUDY

•

assessable pensions, benefits and allowances under the Social Security Act 1991 or the Veterans' Entitlements Act 1986, or similar payments made under a law of a foreign country, state or province.

Back payments (including lump sums in arrears)

A back payment is a payment that was meant to have been made in a prior period. For example:

•

your employee's wages were underpaid due to an error or oversight

•

an allowance you were due to pay in July was overlooked and you made the payment in December.

A back payment is distinct from a bonus, which is a payment made for recognition of performance including past performance. A bonus (or similar payment) can only be considered a back payment if you paid the bonus later than the time that it should have been paid.

If you normally process payments in a pay period later than when the work is performed, for example, overtime payments paid with a time lag of one pay period, they are not considered back payments. These payments are treated as part of the normal pay cycle when paid and withholding is calculated on total earnings for that period. An overtime payment is only considered a back payment if it was meant to have been made in a prior pay period.

Commissions

Commissions are typically payments made as recognition of performance or service, and may be calculated as a percentage of the proceeds from a particular transaction or series of transactions.

Bonuses and similar payments

A bonus is usually made to an employee in recognition of performance or services, and may be calculated as a percentage of the proceeds from a particular business transaction. These payments may not necessarily be related to a particular period of work.

A payment will be treated as similar to a bonus if it is of a one-off nature that does not relate to work performed in a particular period. Examples include:

•

a once-only payment made to a payee as compensation for a changed work location

•

an amount paid as a sign-on bonus to a payee entering a workplace agreement

•

any lump sum allowance.

Leave loading

Payment of leave loading can also be regarded as a payment similar to a bonus, if it is made as a lump sum and not on a pro rata basis as leave is taken. If you pay leave loading on a pro rata basis, add it to earnings for the period to calculate withholding using the standard tax tables.

Tax file number (TFN) declarations

The answers your employees provide on their Tax file number declaration determine the amount you need to withhold from their payments. A Tax file number declaration applies to any payments made after you receive the declaration. If you receive an updated declaration from an employee, it will override the previous one.

If an employee does not give you a valid Tax file number declaration within 14 days of starting an employer/employee relationship, you must complete a Tax file number declaration with all available details of the employee and send it to us.

When a TFN has not been provided

You must withhold 47% from any payment you make to a resident employee and 45% from a foreign resident employee (ignoring any cents) if all of the following apply:

•

they have not quoted their TFN

•

they have not claimed an exemption from quoting their TFN

•

they have not advised you that they have applied for a TFN or have made an enquiry with us.

If an employee states at question 1 of the Tax file number declaration they have lodged a Tax file number - application or enquiry for Individuals ith us, they have 28 days to provide you with their TFN.

If the employee has not given you their TFN within 28 days, you must withhold 47% from any payment you make to a resident employee and 45% from a foreign resident employee (ignoring any cents) unless we tell you not to.

Do not allow for tax offsets or Medicare levy adjustment. Do not withhold any amount for:

•

Higher Education Loan Program (HELP) debts

•

Student Start-up Loan (SSL) debts (includes ABSTUDY SSL debts)

•

Trade Support Loan (TSL) debts

•

Financial Supplement debts.

Terms we use

Additional payments

Additional payments include back payments (including lump sum payments in arrears), commissions, bonuses and similar payments.

Normal earnings

Normal earnings are gross taxable earnings and include all salary and wage income, taxable allowances, and overtime earnings for the current financial year. This includes any back payments previously made using Method B(i).

At the start of a financial year, an employee's normal earnings can be based on the last full pay period worked in the previous financial year.

If an employee's pay fluctuates significantly, you can use an average of gross taxable earnings for the current financial year (or, if applicable, the previous financial year).

If an employee has no current or past normal earnings (for example, the employee is newly employed), you can include expected future earnings in your calculations. This can be based on the employee's contracted or expected salary for the financial year.

For the purposes of this table, normal earnings do not include employment termination payments or unused leave payments made on termination of employment.

Average total earnings

Average total earnings are the sum of all normal earnings paid in the current financial year, including current pay, plus any current year back payments if Method B(i) is used to calculate withholding. Then divide the total earnings by the number of pay periods to date (including the current pay period).

Pay periods per financial year

Pay periods per financial year refers to a total of 52 pay periods if paid weekly, 26 pay periods if paid fortnightly or 12 pay periods if paid monthly. No adjustments are required for a 53 week / 27 fortnight year.

Withholding limit

If your employee has a Higher Education Loan Program (HELP), Student Start-up Loan (SSL), Trade Support Loan (TSL) or Financial Supplement debt, see HELP, SSL, TSL, SFSS and additional payments.

If you use Method A or Method B(ii), the amount of tax to be withheld from an additional payment is limited to a maximum of 47% of the additional payment. If the withholding amount calculated (including a HELP, SSL, TSL or Financial Supplement component) using Method A or Method B(ii) exceeds 47% of the additional payment being made, then the amount is reduced to be equal to 47% of that payment. The withholding limit applies to the additional payment only and not to normal earnings for the current pay period.

For some employees, the withholding limit may result in their withholding amounts not being sufficient to cover their end-of-year tax liability, as their total earnings for the financial year may exceed the HELP, SSL, TSL or Financial Supplement repayment threshold or attract a higher rate of tax. Under these circumstances, your employee can arrange an upwards variation by entering into an agreement with you to vary the rate or amount of withholding.

For more information about withholding variations, refer to:

•

For employers: Variations

•

For employees: Varying your PAYG withholding.

For more information about HELP, SSL, TSL and Financial Supplement repayment thresholds, see HELP, SSL, TSL and SFSS repayment thresholds and rates.

Working out the withholding amount

To work out the amount you need to withhold from an additional payment, you must use either Method A or Method B.

Using Method B is more complex but produces a withholding amount that more closely approximates the actual tax payable.

Calculations made using either method are acceptable to work out the withholding amount. If your calculation using either method results in a negative amount, you treat the result as nil.

Using Method A

Use this method for any additional payments made regardless of the financial year the additional payment applies to. This includes all back payments, commissions, bonuses or similar payments.

This method calculates withholding by apportioning additional payments made in the current pay period over the number of pay periods in a financial year, and applying that average amount to the gross earnings in the current pay period.

If you are paying a commission, bonus or similar payment for a defined period of less than 12 months, you can choose to calculate withholding by using the number of pay periods the payment relates to at step 3. For example, if a commission relates to four weeks and the employee is paid weekly, you divide the commission by four pay periods at step 3, rather than 52 pay periods.

Using Method B

Use Method B(i) for any back payments applied to specific periods in the current financial year.

Use Method B(ii) for either:

•

back payments that relate to a prior financial year

•

any additional payments (including commissions, bonuses or similar payments) that don't relate to a single pay period regardless of the financial year the additional payment applies to.

If you are making back payments applying to current and previous financial years, apportion the back payment between those years and then use the applicable method for each component to calculate withholding.

If you are making multiple additional payments:

•

in the current pay period, you first need to calculate withholding on the total of any current financial year back payments (including lump sum in arrears) then calculate the withholding on any other additional payments

•

in the current financial year, that is, you made an additional payment to the employee in a previous pay period, do not recalculate the withholding for the additional payment previously made.

B(i) Back payments applied to specific periods in the current financial year

This method recalculates withholding for each pay period the back payment applies.

¹ See Terms we use for the definition of normal earnings.

B(ii) Additional payments applied over the whole financial year

This method calculates withholding by averaging all additional payments made in the current financial year over the number of pay periods in a financial year, and applying that to the average total earnings to date.

² See Terms we use for the definition of average total earnings.

Commissions, bonuses or similar payments

If a commission, bonus or similar payment relates to work your employee performed for more than one pay period (or for an undefined period), you calculate withholding by applying either Method A or Method B(ii).

Do not use this schedule for payments for a single pay period.

If the commission, bonus or similar payment relates to work your employee performed in a single pay period (for example, a week, a fortnight or a month) the amount is added to all their other earnings for the current period. Withholding is then calculated using the standard PAYG withholding tax tables.

HELP, SSL, TSL, SFSS and additional payments

If your employee has advised you they have a Higher Education Loan Program (HELP), Student Start-up Loan (SSL), Trade Support Loan (TSL) or Financial Supplement debt on their Tax file number declaration or Withholding declaration, you must also withhold from the additional payment using the relevant HELP/SSL/TSL or SFSS tax tables.

You calculate the amounts you need to withhold from additional payments for HELP, SSL, TSL and SFSS by using the same method you used to calculate the PAYG withholding amount from the additional payment.

For example, if you calculate the amount to be withheld from the additional payment using Method A, use the same method to calculate the amounts to be withheld for HELP, SSL, TSL and SFSS purposes.

How do you calculate withholding on the additional payment if it is calculated separately to the HELP, SSL, TSL and SFSS components?

If you calculate withholding separately, you need to make sure that the withholding limit in Method A and Method B(ii) applies to the combined total calculated for the additional payment and the HELP, SSL, TSL and SFSS components. For example, at step 9 in Method A you must combine the amounts from the two separate calculations used for step 7 before comparing it to the amount calculated at step 8.

Next step:

You can use the following schedule that combine PAYG withholding with HELP, SSL, TSL and SFSS instead of repeating the calculation separately for each component:

•

Statement of formulas for calculating HELP, SSL, TSL and SFSS components

The results obtained when using the coefficients in the above schedule may differ slightly from the sums of the amounts shown in the PAYG tax tables. Either calculation is acceptable.

Copies of all the tax tables are available, refer to Tax tables.

Variations

If your employee has a withholding variation in place for the current financial year, you use one of the following to work out the amount of withholding from additional payments:

•

the varied rate - if the relevant income is specified in the variation notice

•

this tax table - if the relevant income is not specified in the variation notice.

If your employee had a withholding variation in place at the time the additional payment accrued but the withholding variation is no longer in effect when the additional payment is made, it does not apply when working out the amount to withhold.

If you need help to determine whether to use a withholding variation to work out the amount to withhold from an additional payment, phone us on 1300 360 221.

Leave without pay

For the purposes of this table, any periods where your employee has taken leave without pay do not affect the calculations outlined in each of the methods. For example, for Method A and Method B(ii), you are still required at step 3 to apportion all additional payments made by the total number of pay periods in a financial year (that is, 52 weekly pay periods, 26 fortnightly pay periods or 12 monthly pay periods).

Superannuation income streams

To work out the amount you need to withhold from the taxable component of back payments of super income streams (pensions and annuities), including lump sum payments in arrears, use either Method A or B.

Payment summaries

You must record back payments on your employee's payment summary. What payment summary you use depends on whether the back payments relate to a superannuation income stream or previous period of assessable foreign service. Use:

•

PAYG payment summary - individual non-business for all back payments except those for super income streams or if they were related to a previous period of assessable foreign service

•

PAYG payment summary - superannuation income stream for super income stream payments

•

PAYG payment summary - foreign employment for payments related to a previous period of assessable foreign service.

For more information about payment summaries, refer to PAYG payment summaries and guidelines.

Completing the individual non-business payment summary

For payments accrued in the current financial year include the total:

•

gross amount of all payments at 'Gross payments'

•

amount withheld at 'Total tax withheld'.

Salary and wage income accrued before the current financial year

For each payment accrued in a prior financial year, but not more than 12 months before the date of payment include the total:

•

gross amount of the payment at 'Gross payments'

•

amount withheld at 'Total tax withheld'.

For each payment accrued more than 12 months before the date of payment of less than $1,200, include the total:

•

gross amount of the payment at 'Gross payments'

•

amount withheld at 'Total tax withheld'.

For each payment accrued more than 12 months before the date of payment of $1,200 or more, include the total:

•

gross amount of the payment at 'Lump sum E'

•

amount withheld at 'Total tax withheld'.

Other amounts accrued before the current financial year ³

For each payment accrued in a prior financial year of less than $1,200, include the total:

•

gross amount of the payment at 'Gross payments'

•

amount withheld at 'Total tax withheld'.

For each payment accrued in a prior financial year of $1,200 or more, include the total:

•

gross amount of the payment at 'Lump sum E'

•

amount withheld at 'Total tax withheld'.

Employee letter

You must also provide your employee with a letter specifying the financial years over which the amount accrued and the gross amount that accrued each financial year.

Completing the superannuation income stream payment summary

For payments accrued in the current financial year, include:

•

the component amounts at both

-

'Taxable component' (both taxed and untaxed elements if applicable)

-

'Tax-free component'

•

the amount withheld at 'Total tax withheld'.

For payments accrued prior to the current financial year, include:

•

the component amounts at both

-

'Lump sum in arrears - taxable component' (both taxed and untaxed elements if applicable)

-

'Lump sum in arrears - tax-free component'

•

the amount withheld at 'Total tax withheld'.

Payee letter

You must also provide your payee with a letter specifying the financial years over which the amount accrued and the gross amount that accrued each financial year.

Completing the foreign employment payment summary

For salary and wage payments accrued in the current financial year, include the total:

•

gross amount of all payments at 'Gross payments'

•

amount withheld and paid to a foreign tax jurisdiction (if applicable) at 'Foreign tax paid'

•

amount withheld for Australian tax purposes at 'Total Australian tax withheld'.

For each salary and wage payment accrued in a prior financial year, but not more than 12 months before the date of payment, include the total:

•

gross amount of the payment at 'Gross payments'

•

amount withheld and paid to a foreign tax jurisdiction (if applicable) at 'Foreign tax paid'

•

amount withheld for Australian tax purposes at 'Total Australian tax withheld'.

For each salary and wage payment accrued more than 12 months before the date of payment of less than $1,200, include the total:

•

gross amount of the payment at 'Gross payments'

•

amount withheld and paid to a foreign tax jurisdiction (if applicable) at 'Foreign tax paid'

•

amount withheld for Australian tax purposes at 'Total Australian tax withheld'.

For each salary and wage payment accrued more than 12 months before the date of payment of $1,200 or more, include the total:

•

gross amount of the payment at 'Lump sum E'

•

amount withheld and paid to a foreign tax jurisdiction (if applicable) at 'Foreign tax paid'

•

amount withheld for Australian tax purposes at 'Total Australian tax withheld'.

Employee letter

You must also provide your employee with a letter specifying the financial years over which the amount accrued and the gross amount that accrued each financial year.

³ Refer to Other payments you should use this schedule for

Examples

Example 1: Withholding from a bonus payment using Method A

Mark, who has an accumulated HELP debt, is due to receive an annual bonus of $900. Mark earns $1,600 per week. Using Method A, calculate the withholding amount for the current pay period as follows:

PAYG withholding component

Step	Instruction	Result
1	Work out Mark's gross earnings for the current pay period.	$1,600
2	Use the relevant tax table to find the amount to be withheld from Mark's gross earnings in step 1.	$390
3	Divide the additional payment by the number of pay periods in the financial year. = $900 / 52	$17
4	Add the amount at step 3 to the gross earnings at step 1. = $1,600 + $17	$1,617
5	Use the relevant tax table to find the amount to be withheld from the amount at step 4.	$396
6	Subtract the amount at step 2 from the amount at step 5. = $396 - $390	$6
7	Multiply the amount at step 6 by the number of pay periods in the financial year for the withholding on the additional payment. = $6 × 52	$312

As Mark has an accumulated HELP debt, his employer also needs to calculate a withholding amount from the bonus payment for HELP. They use the same method as they used to calculate withholding for the bonus payment in the first part of this example.

HELP component

Step	Instruction	Result
1	Work out Mark's gross earnings for the current pay period.	$1,600
2	Use the relevant tax table to find the amount to be withheld for HELP from Mark's gross earnings in step 1.	$96
3	Divide the additional payment by the number of pay periods in the financial year. = $900 / 52	$17
4	Add the amount at step 3 to the gross earnings at step 1. = $1,600 + $17	$1,617
5	Use the relevant tax table to find the amount to be withheld for HELP from the amount at step 4.	$97
6	Subtract the amount at step 2 from the amount at step 5. = $97 - $96	$1
7	Multiply the amount at step 6 by the number of pay periods in the financial year for the HELP withholding on the additional payment. = $1 × 52	$52

Withholding limit (including HELP component)

Step	Instruction	Result
8	Multiply the additional payment being made in the current pay period by 47%. = $900 × 47%	$423
9	Use the lesser amount of step 7 (combined) and step 8 for the withholding on the additional payment. Ignore any cents. Combine two step 7 results $312 + $52 = $364. This amount is used as it's less than step 8.	$364
10	See below

Calculate the total PAYG withholding amount for the current pay period (step 10)

Add the amounts to be withheld:

•

PAYG withholding on gross earnings in the current pay period = $390

•

HELP withholding on gross earnings in the current pay period = $96

•

PAYG withholding on additional payment = $312

•

HELP withholding on additional payment = $52

The total PAYG withholding is $850 ($390 + $96 + $312 + $52).

Example 1 uses both:

•

HELP/SSL/TSL weekly tax table (NAT 2173) effective from 1 July 2018

•

Statement of formulas for calculating the amount to be withheld (NAT 1004) effective from 1 July 2018 - the calculations are made using scale 2, with tax-free threshold.

Example 2: Withholding from a missed payment using Method B(i)

Robyn, who has an accumulated HELP debt, is due to receive a back payment relating to the current financial year following a pay rise. Since the first pay period of the current financial year and up until period 8, Robyn has earned $1,000 per week. From pay period 9 (her current pay period), Robyn will earn $1,100 per week. Robyn's back payment which covers the first eight pay periods of the current financial year will be paid to her in pay period 9. Therefore, Robyn will receive a back payment of $800 along with her normal gross earnings of $1,100. Using Method B(i), calculate the withholding amount for the current pay period 9 as follows:

PAYG withholding component

Step	Instruction	Result
1	Work out how much of Robyn's additional payment applied to each earlier pay period in the current financial year. In this example it is $800 over eight pay periods. = $800 / 8	$100
2	For the first affected pay period, add the additional payment relevant to that period to the normal earnings previously paid to get the total earnings for that period. = $1,000 + $100	$1,100
3	Use the relevant tax table to find the amount to be withheld from Robyn's total earnings for that period.	$217
4	Subtract the amount previously withheld for the period from the amount at step 3. = $217 - $183	$34
5	Repeat steps 2-4 for each pay period affected. Total the amounts calculated in step 4 for each pay period for the withholding on the additional payment. As it is the same amount for each pay period in this example, it will be 8 × $34.	$272
6	Use the relevant tax table to find the amount to be withheld from Robyn's gross earnings for the current pay period.	$217
7	Add the withholding on the additional payment (step 5) to the withholding on Robyn's gross earnings (step 6) to work out the total withholding for the current pay period. = $217 + $272	$489

As Robyn has an accumulated HELP debt, her employer also needs to calculate a withholding amount from the back payment for HELP. They use the same method as they used to calculate withholding for the back payment in the first part of this example.

HELP component

Step	Instruction	Result
1	Work out how much of Robyn's additional payment applied to each earlier pay period in the current financial year. In this example it is $800 over eight pay periods. = $800 / 8	$100
2	For the first affected pay period, add the additional payment relevant to that period to the normal earnings previously paid to get total normal earnings for that period. = $1,000 + $100	$1,100
3	Use the relevant tax table to find the amount to be withheld for HELP from Robyn's total normal earnings for that period.	$22
4	Subtract the amount previously withheld for the period from the amount at step 3. = $22 - $20	$2
5	Repeat steps 2-4 for each pay period affected. Total the amounts calculated in step 4 for each pay period for the HELP withholding on the additional payments. As it is the same amount for each pay period in this example, it will be 8 × $16.	$16
6	Use the relevant tax table to find the amount to be withheld for HELP from Robyn's gross earnings for the current pay period.	$16
7	Add the HELP withholding on the additional payment (step 5) to the withholding on Robyn's gross earnings (step 6) to work out the withholding for HELP for the current period. = $22 + $16	$38

Calculate the total PAYG withholding amount for the current pay period

Add the amounts to be withheld:

•

PAYG withholding on gross earnings in the current pay period = $217

•

HELP withholding on gross earnings in the current pay period = $22

•

PAYG withholding on additional payment = $272

•

HELP withholding on additional payment = $16

The total PAYG withholding is $527 ($217 + $22 + $272 + $16).

Example 2 uses:

•

HELP/SSL/TSL weekly tax table (NAT 2173) effective from 1 July 2018

•

Statement of formulas for calculating the amount to be withheld (NAT 1004) effective from 1 July 2018 - the calculations are made using scale 2, with tax-free threshold.

Example 3: Withholding from a lump sum payment in arrears using Method B(ii)

Mary is employed by Minercorp Pty Ltd and receives a fortnightly salary of $1,800. She is entitled to an allowance from her employer when working in remote areas. In 2016, Mary worked in a remote area for six months, but she was not paid this allowance. The total allowance that she should have been paid for this period was $2,480. Her employer discovers their oversight and agrees to pay her the $2,480 as a lump sum payment in arrears on 10 November 2018. Her gross earnings for pay period 10 is $1,800.

Mary has received normal earnings (year to date) of $18,000 including the current pay. The amount Mary's payer must withhold from this payment is calculated using Method B(ii) as follows:

Step	Instruction	Result
1	Calculate Mary's average total earnings over the current financial year to date (including current pay). = $18,000 / 10	$1,800
2	Use the relevant tax table to find the amount to be withheld from Mary's average total earnings in step 1.	$296
3	Add all additional payments made to Mary in the current financial year if Method B(ii) was used to calculate the withholding, to the additional payment in the current pay. Mary's additional payment of $2,480 is then divided by the number of pay periods in the financial year. = $2,480 / 26	$95
4	Add the amount at step 3 to the average total earnings at step 1. = $1,800 + $95	$1,895
5	Use the relevant tax table to find the amount to be withheld from the amount at step 4.	$328
6	Subtract the amount at step 2 from the amount at step 5. = $328 - $296	$32
7	Multiply the amount in step 6 by the number of pay periods used in step 3. = $32 × 26	$832
8	Subtract any amounts previously withheld from additional payments in the current financial year if Method B(ii) was used, from the amount at step 7 for the withholding on the additional payment. = $832 - $0	$832
9	Use the relevant tax table to find the amount to be withheld from the payee's gross earnings (excluding additional payments) for the current pay period.	$296
10	Work out the total PAYG withholding for this pay period by adding the withholding on the additional payment (step 8) to the withholding on the gross earnings (step 9). = $832 + $296	$1,128

Example 3 uses Statement of formulas for calculating the amount to be withheld (NAT 1004) effective from 1 July 2017. The calculations are made using scale 2, with tax-free threshold.

Example 4: Withholding using Method B(i) and Method B(ii)

Pablo, who has an accumulated Financial Supplement debt, is employed by Macropayers Pty Ltd. On 1 September 2017, he received a salary increase of $5 an hour, taking his gross monthly salary from $4,800 to $5,600. His employer agreed that the increase would be backdated to 1 August 2017 and paid at the end of September 2018.

This means that the back payment of salary covers 13 pay periods. The total back payment of salary is $10,400. To work out the total amount to be withheld from the back payment to Pablo, his employer will need to calculate the amount accrued in both:

•

the current financial year (2 pay periods from 1 July to August 2018) = $1,600

•

a prior financial year (11 pay periods from 1 August 2017 to 30 June 2018) = $8,800.

You don't need to complete some steps if both Methods B(i) and (ii) are used in the calculations.

Method B(i) - PAYG withholding component

Step	Instruction	Result
1	Work out how much of Pablo's additional payment applied to each earlier pay period in the current financial year. In this example it is $1,600 over two pay periods. = $1,600 / 2	$800
2	For the first affected pay period, add the additional payment relevant to that period to the normal earnings previously paid to get total earnings for that period. = $4,800 + $800	$5,600
3	Use the relevant tax table to find the amount to be withheld from Pablo's total earnings for that period.	$1,231
4	Subtract the amount previously withheld for the period from the amount at step 3. = $1,231 - $953	$278
5	Repeat steps 2-4 for each pay period affected. Total the amounts calculated in step 4 for each pay period for the withholding on the additional payment. As it is the same amount for each pay period in this example, it will be 2 × $278.	$556
6	This step is not required as withholding is also calculated using Method B(ii).
7	This step is not required as withholding is also calculated using Method B(ii).

As Pablo has an accumulated Financial Supplement debt, his employer will need to calculate a withholding amount from the back payment for SFSS. They use the same method as they used to calculate withholding for the back payment in the first part of this example.

Method B(i) - SFSS component

Step	Instruction	Result
1	Work out how much of Pablo's additional payment applied to each earlier pay period in the current financial year. In this example it is $1,600 over two pay periods. = $1,600 / 2	$800
2	For the first affected pay period, add the additional payment relevant to that period to the normal earnings previously paid to get total normal earnings for that period. = $4,800 + $800	$5,600
3	Use the relevant tax table to find the amount to be withheld for SFSS from Pablo's total normal gross earnings for that period.	$169
4	Subtract the amount previously withheld for the period from the amount at step 3. = $169 - $95	$74
5	Repeat steps 2-4 for each pay period affected. Total the amounts calculated in step 4 for each pay period for the SFSS withholding on the additional payment. As it is the same amount for each pay period in this example, it will be 2 × $74.	$74
6	This step is not required as withholding is also calculated using Method B(ii).
7	This step is not required as withholding is also calculated using Method B(ii).

Method B(ii) - PAYG withholding component

Step	Instruction	Result
1	Calculate Pablo's average total earnings, which in this example is = (salary earnings to date + current financial year additional payments to date) / number of pay periods = [($4,800 + $4,800 + $5,600) + $1,600] / 3 = $16,800 / 3	$5,600
2	Use the relevant tax table to find the amount to be withheld from Pablo's average total earnings in step 1.	$1,231
3	Add all additional payments made to Pablo in current financial year where Method B(ii) was used to calculate the withholding, to the additional payment in current pay. Then divide by the number of pay periods in the financial year. = $8,800 / 12	$733
4	Add the amount at step 3 to the average total earnings at step 1. = $5,600 + $733	$6,333
5	Use the relevant tax table to find the amount to be withheld from the amount at step 4.	$1,482
6	Subtract the amount at step 2 from the amount at step 5. = $1,482 - $1,231	$251
7	Multiply the amount in step 6 by the number of pay periods used in step 3. = $251 × 12	$3,012
8	Subtract any amounts previously withheld from additional payments in the current financial year if Method B(ii) was used, from the amount at step 7 for the withholding on the additional payment. = $3,012 - $0	$3,012
9	This step is not required as final calculations for withholding limit and total withholding will be made after SFSS component is calculated.
10	This step is not required as final calculations for withholding limit and total withholding will be made after SFSS component is calculated.
11	This step is not required as final calculations for withholding limit and total withholding will be made after SFSS component is calculated.
12	This step is not required as final calculations for withholding limit and total withholding will be made after SFSS component is calculated.

As Pablo has an accumulated Financial Supplement debt his employer will need to calculate the withholding amount from the back payment for SFSS. They use the same method as they used to calculate withholding for the back payment in the first part of this example.

Method B(ii) - SFSS component

Step	Instruction	Result
1	Calculate Pablo's average total earnings, which in this example is: = (salary earnings to date + current financial year additional payments to date) / number of pay periods = [($4,800 + $4,800 + $5,600) + $1,600] / 3 = $16,800 / 3	$5,600
2	Use the relevant tax table to find the amount to be withheld for SFSS on Pablo's average total earnings in step 1.	$169
3	Add all additional payments made to Pablo in current financial year where Method B(ii) was used to calculate the withholding, to the additional payment in current pay. Then divide by the number of pay periods in the financial year. = $8,800 / 12	$733
4	Add the amount at step 3 to the average total earnings at step 1. = $5,600 + $733	$6,333
5	Use the relevant tax table to find the amount to be withheld for SFSS from the amount at step 4.	$191
6	Subtract the amount at step 2 from the amount at step 5. = $191 - $169	$22
7	Multiply the amount in step 6 by the number of pay periods used in step 3. = $22 × 12	$264
8	Subtract any amounts previously withheld from additional payments in the current financial year if Method B(ii) was used, from the amount at step 7 for the withholding for SFSS on the additional payment. = $264 - $0	$264

Withholding limit (including SFSS component)

Step	Instruction	Result
9	Multiply the additional payment being made using Method B(ii) in the current pay period by 49%. = $8,800 × 47%	$4,136
10	Use the lesser amount of step 8 (combined) and step 9 for the withholding on the additional payment. Ignore any cents. Combine the two step 8 results. = $3,012 + $264 = $3,276 This amount is used as it's less than step 9.	$3,276
11	This step is not applicable as total withholding for the current pay period will need to include amounts calculated in Method B(i).
12	This step is not applicable as total withholding for the current pay period will need to include amounts calculated in Method B(i).

Calculate the total PAYG withholding amount for the current pay period

Add the amounts to be withheld:

Withholding on gross earnings current pay period

•

PAYG withholding on gross earnings in the current pay period = $1,231

•

SFSS withholding on gross earnings in the current pay period = $169

Method B(i) withholding

•

PAYG withholding on additional payment for current financial year = $556

•

SFSS withholding on additional payment for current financial year = $148

Method B(ii) withholding

•

PAYG withholding on additional payment for prior financial year = $3,012

•

SFSS withholding on additional payment for prior financial year = $264

Total PAYG withholding is $5,380
($1,231 + $169 + $556 + $148 + $3,012 + $264).

Example 4 uses both:

•

Student Financial Supplement Scheme (SFSS) monthly tax table (NAT 3308) effective from 1 July 2018

•

Statement of formulas for calculating the amount to be withheld (NAT 1004) effective from 1 July 2018 - the calculations are made using scale 2, with tax-free threshold.

Schedule 7 - Tax table for unused leave payments on termination of employment

For payments made on or after 1 July 2018

This document is a withholding schedule made by the Commissioner of Taxation in accordance with sections 15-25 and 15-30 of Schedule 1 to the Taxation Administration Act 1953 (TAA). It applies to withholding payments covered by section 12-90 of Schedule 1 to the TAA.

Using this schedule

You should use this schedule if you pay an amount to an employee for unused leave on the termination of their employment or office.

Unused leave payments on termination of employment or office include:

•

annual leave

•

holiday pay

•

leave loading

•

leave bonuses

•

long service leave.

Before calculating the amount to be withheld, you must work out if the payments are being made as a result of a genuine redundancy, invalidity or an early retirement scheme.

For more information, refer to Withholding from unused leave payments on termination of employment.

If you employ individuals under a working holiday makers visa you must use the Tax table for working holiday makers for all payments made to them, including unused leave payments on termination of employment.

Working out the withholding amount

When a TFN is provided

The amount to withhold is calculated using the table below.

If the post-17 August 1993 lump sum payment from normal termination is less than $300, you must withhold the lesser of the following:

•

the amount worked out using the table below

•

32% of the payment.

Rounding of withholding amounts

Withholding amounts calculated by applying this table are rounded to the nearest dollar. Results ending in 50 cents or higher are rounded upwards. If a TFN is not provided, ignore cents when calculating withholding amounts.

Marginal rate calculation

To work out the marginal rate, you must:

1.

Using the relevant PAYG withholding tax table, work out the amount to withhold from your employee's normal gross earnings for a regular pay period.

2.

Divide the amount of the payment by the number of normal pay periods in 12 months (12 monthly payments, 26 fortnightly payments or 52 weekly payments).

3.

Ignore any cents.

4.

Add the amount at step 3 to the normal gross earnings for a single pay period.

5.

Use the same PAYG withholding tax tables used at step 1 to work out the amount to withhold for the amount at step 4.

6.

Subtract the amount at step 1 from the amount at step 5.

7.

Multiply the amount obtained at step 6 by the number of normal pay periods in 12 months (12 monthly payments, 26 fortnightly payments or 52 weekly payments).

Do not withhold any amount for:

•

Higher Education Loan Program (HELP) debts

•

Student Start-up Loan (SSL) debts

•

Trade Support Loan (TSL) debts

•

Financial Supplement debts.

Normal gross earnings

Normal gross earnings are all payments, except those relating to termination payments, received in the last full pay period of employment. This includes taxable allowances, overtime and bonuses. Therefore, your employee's normal gross earnings should be taken to be the earnings relating to the last full pay period worked.

Where your employee's pay fluctuates significantly over a number of pay periods, we will accept an average of gross taxable earnings for the financial year to date over the number of pays received.

Example

The following example uses the Weekly tax table (NAT 1005) effective from 1 July 2018.

Beth retires on 31 December 2018. She qualified for long service leave after 10 years of service, with further leave accruing on each completed year of service.

She is not leaving because of genuine redundancy, invalidity or under an early retirement scheme.

This week Beth also receives her normal weekly earnings of $1,155. She has quoted her TFN and has claimed the tax-free threshold. Therefore, the amount withheld is calculated using column 2 of the Weekly tax table.

Details of payment for long service leave

Pre-16 August 1978 component = $3,690.00

16 August 1978 to 17 August 1993 component = $7,700.00

Post-17 August 1993 component = $10,890.00

Amounts to be withheld

Pre-16 August 1978 component subject to withholding
= $3,690.00 × 5% = $184.50

The marginal rate calculation is used to work out the amount to be withheld from the pre-16 August 1978 component.

16 August 1978 to 17 August 1993 component
= $7,700.00 × 32% = $2,464.00

The post-17 August 1993 component of $10,890.00 is also to be withheld at the marginal rate. To simplify the marginal rate calculation for this employee, the pre-16 August 1978 component and the post-17 August 1993 component are added together first: $184.50 + $10,890.00 = $11,074.50

Now apply the marginal rate calculation to the sum of the two components.

Step	Instruction	Result
1	Amounts to be withheld from normal gross earnings ($1,155)	$236
2	Divide the amount of the payment by the number of normal pay periods in 12 months ($11,074.50/52)	$212.97
3	Disregard any cents	$212
4	Add the amount at step 3 to normal gross earnings for a single pay period ($1,155 + $212)	$1,367
5	Work out the amount to be withheld from the amount at step 4 ($1,367)	$310
6	Subtract the amount at step 1 from the amount at step 5 ($310 - $236)	$74
7	Multiply the amount at step 6 by the number of normal pay periods in 12 months ($74 x 52)	$3,848

The amount to be withheld from the three components of Beth's unused long service leave payments is $6,312 ($2,464 + $3,848). See Rounding of withholding amounts.

The total amount to be withheld is then $6,548 ($236 withholding from normal earnings plus $6,312 withholding from long service leave).

When a TFN has not been provided

If your employee who is receiving the unused leave payments has not provided you with their TFN before the payment is made, you must withhold 47% from the payment.

If your employee is a foreign resident who has not provided you with their TFN, you must withhold 45% from the payment.

If your employee believes that for their circumstances the amount you withhold will be too much, they may apply for a variation to reduce the amount of withholding.

For more information refer to Varying your PAYG withholding

Tax file number declaration

Any Tax file number declaration your employee provides while they were working for you will only be effective:

•

for the period that they were working for you

•

12 months after you make the last payment.

Schedule 8 - Statement of formulas for calculating study and training support loans components

The coefficients in this schedule should be used together with the Statement of formulas for calculating amounts to be withheld.

Use this statement of formulas for payments made from 1 July 2020 to 30 June 2021.

This document is a withholding schedule made by the Commissioner of Taxation in accordance with sections 15-25 and 15-30 of Schedule 1 to the Taxation Administration Act 1953 (TAA). It applies to withholding payments covered by Subdivisions 12-B (except sections 12-50 and 12-55), 12-C (except sections 12-85 and 12-90) and 12-D of Schedule 1 to the TAA.

Using this schedule

You should use this schedule if you develop your own payroll software package. Formulas and coefficients are used for calculating weekly withholding amounts for employees who have a:

•

Higher Education Loan Program (HELP) debt

•

VET Student Loan (VSL) debt

•

Financial Supplement (FS) debt

•

Student Start-up Loan (SSL) debt (includes ABSTUDY SSL debts), or

•

Trade Support Loan (TSL) debt.

See also:

•

The Tax withheld calculator which can help you work out the correct amount of tax to withhold from payments to most employees.

•

You can download a printable version of Statement of formulas for calculating study and training support loans components (PDF, 325KB).

Using a formula

The withholding amounts for employees who have a study and training support loans debt can be expressed in a mathematical form.

If you have developed your own payroll software package, you can use the formulas and component rates outlined below.

The formulas comprise linear equations of the form y = ax, where:

•

y is the weekly study and training support loans component

•

x is the weekly earnings - or weekly equivalent of earnings - rounded down to whole dollars plus 99 cents

•

a is the value of the component rate as shown in the following tables.

Study and training support loans component rates

Calculating fortnightly, monthly or quarterly withholding amounts

First calculate the weekly equivalent of fortnightly, monthly or quarterly earnings. If you pay:

•

fortnightly - divide the sum of the fortnightly earnings and the amount of any allowances subject to withholding by two. Ignore any cents in the result and then add 99 cents

•

monthly - obtain the sum of the monthly earnings and the amount of any allowances subject to withholding (if the result is an amount ending in 33 cents, add one cent). Multiply this amount by three and then divide by 13. Ignore any cents in the result and then add 99 cents

•

quarterly - divide the sum of the quarterly earnings and the amount of any allowances subject to withholding by 13. Ignore any cents in the result and then add 99 cents.

Then calculate fortnightly, monthly or quarterly withholding amounts as follows:

•

fortnightly - determine the rounded weekly withholding amount applicable to the weekly equivalent of earnings before any adjustment for tax offsets. Multiply this amount by two

•

monthly - determine the rounded weekly withholding amount applicable to the weekly equivalent of earnings before any adjustment for tax offsets. Multiply this amount by 13, divide the product by three and round the result to the nearest dollar

•

quarterly - determine the rounded weekly withholding amount applicable to the weekly equivalent of earnings before any adjustment for tax offsets. Multiply this amount by 13.

When to work out the study and training support loans component

You will need to calculate the study and training support loans component when your employee has given you a Tax file number declaration or Withholding declaration and has:

•

answered yes to the question on whether they have a:

-

Higher Education Loan Program (HELP) debt

-

VET Student Loan (VSL) debt

-

Financial Supplement (FS) debt

-

Student Start-up Loan (SSL) debt (including ABSTUDY SSL debts)

-

Trade Support Loan (TSL) debt

•

not completed a Medicare levy variation declaration claiming a reduction or exemption in the Medicare levy for having a spouse or dependants and low family income

•

claimed the tax-free threshold or is a foreign resident with earnings of one of the following:

-

$896 or more if paid weekly

-

$1,792 or more if paid fortnightly

-

$3,822.67 or more if paid monthly

-

$11,648 or more if paid quarterly.

If your employee has not claimed the tax-free threshold, the study and training support loans component is calculated on earnings of:

•

$546 or more if paid weekly

•

$1,092 or more if paid fortnightly

•

$2,366 or more if paid monthly

•

$7,098 or more if paid quarterly.

You must withhold the study and training support loans component from all your employee's earnings, including taxable allowances, bonuses and commissions.

Examples

8.

Employee has claimed the tax-free threshold and has weekly earnings of $1,095.84.

STSL = $1,095.99 × 2% = $22.00 rounded to the nearest dollar.

9.

Employee has claimed the tax-free threshold and has fortnightly earnings of $2,355.78.

Weekly equivalent of $2,355.78 = $1,177.99 ($2,355.78 ÷ 2, ignoring cents and adding 99 cents).

Weekly STSL component = $1,177.99 × 3% = $35.00 rounded to the nearest dollar.

Fortnightly STSL component = $70.00 ($35.00 × 2).

10.

Employee has claimed the tax-free threshold and has monthly earnings of $5,488.45.

Weekly equivalent of $5,488.45 = $1,266.99

($5,488.45 × 3 ÷ 13, ignoring cents and adding 99 cents).

Weekly STSL component = $1,266.99 × 3.5% = $44.00 rounded to the nearest dollar.

Monthly STSL component = $191.00 ($44.00 × 13 ÷ 3, rounded to the nearest dollar).

Do not withhold any amount for study and training support loans debts from lump sum termination payments.

Rounding of withholding amounts

Withholding amounts calculated as a result of applying the above formulas are rounded to the nearest dollar. Values ending in 50 cents are rounded to the next higher dollar. Do this rounding directly - that is, do not make a preliminary rounding to the nearest cent.

Accounting software

Software written in accordance with the formulas in this schedule should be tested for accuracy against the sample data provided at tax tables. The results obtained when using the coefficients in this schedule may differ slightly from the sums of the amounts shown in the PAYG tax tables. The differences result from the rounding of components.

Coefficients to work out the weekly amounts to withhold including the study and training support loans component

Your employee's total withholding, including the study and training support loans component, can be calculated using the formula and coefficients stated below.

Using a formula

The formulas comprise linear equations of the form y = ax - b, where:

•

y is the weekly withholding amount expressed in dollars

•

x is the number of whole dollars in the weekly earnings plus 99 cents

•

a and b are the values of the coefficients for each set of formulas for each range of weekly earnings (or, in the case of fortnightly, monthly or quarterly earnings, the weekly equivalent of these amounts).

If two employees are taxed using a particular scale (for example, scale 2) but only one of them has a study and training support loans debt, you will need to set up two separate scales in your payroll system. One scale will need to incorporate the study and training support loans component and one will not - for example, name one 'scale 2' and the other 'scale 22'.

The study and training support loans component does not apply if the employee has not provided a tax file number (TFN).

For scales without the study and training support loans component, refer to Statement of formulas for calculating amounts to be withheld.

Where tax-free threshold not claimed in Tax file number declaration - Scale 1

Where employee has claimed the tax-free threshold in Tax file number declaration - Scale 2

Foreign residents - Scale 3

Where employee claimed FULL exemption from Medicare levy in Medicare levy variation declaration - Scale 5

Where employee claimed HALF exemption from Medicare levy in Medicare levy variation declaration - Scale 6

Withholding amounts including the study and training support loans component worked out using the coefficients may differ slightly from the sums of the amounts shown in the PAYG and study and training support loans tax tables. The differences result from the rounding of components.

Schedule 9 - Tax table for seniors and pensioners

Use for payments to low income aged persons and pensioners

For payments made on or after 1 July 2018

This document is a withholding schedule made by the Commissioner of Taxation in accordance with sections 15-25 and 15-30 of Schedule 1 to the Taxation Administration Act 1953 (TAA). It applies to withholding payments covered by Subdivisions 12-B (except sections 12-50 and 12-55), and 12-D of Schedule 1 to the TAA.

See also:

•

Use the Withholding look-up tool to quickly work out the amount to withhold.

Using this schedule

You should use this schedule if you make payments to:

•

seniors and pensioners who, at the end of the relevant financial year, are 65 years and six months of age or older (for example, to be eligible for the year ending 30 June 2019, an employee must be born on or before 31 December 1953).

•

veterans receiving a service pension and/or war widows/widowers receiving an income support supplement from the Department of Veterans' Affairs who are at least 60 years of age.

This schedule applies to weekly payments including:

•

salary, wages, allowances and leave loading paid to employees

•

director's fees

•

payments to labour-hire workers

•

compensation, sickness or accident payments that are calculated at a periodical rate and made because a person is unable to work (unless the payment is made under an insurance policy to the policy owner)

•

a non-super income stream

•

a super income stream.

This schedule can only apply if the employee has provided you with either:

•

a Withholding declaration answering yes to questions 4, 5 and 8

•

a Withholding declaration - short version for seniors and pensioners answering yes to questions 4, 5 and 6.

See also:

•

You can download a printable version of Tax table for seniors and pensioners (NAT 4466) in Portable Document Format (PDF).

•

For super income stream payments, you must also use Tax table for superannuation income streams to calculate withholding.

Working out the withholding amount

1.

Calculate your employee's total weekly earnings, add any allowances and irregular payments that will be included in this week's pay to the normal weekly earnings, ignoring any cents.

2.

Input the amount from step 1 into the Withholding look-up tool, as per instructions in the tool.

3.

Use the appropriate column to find the correct amount to withhold. If your employee is:

•

single, use column 2

•

a member of an illness-separated couple, use column 3

•

a member of a couple, use column 4.

4.

If your employee is entitled to a tax offset or a Medicare levy adjustment, subtract its weekly value from the withholding amount found in step 3.

Example

An employee has weekly earnings of $619.75. To work out the correct amount to withhold, ignore cents and input $619 into the Withholding look-up tool.

If the employee is:

•

single, use column 2 to find the correct amount to withhold ($7.00)

•

a member of an illness-separated couple, use column 3 to find the correct amount to withhold ($13.00)

•

a member of a couple, use column 4 to find the correct amount to withhold ($27.00).

Calculating fortnightly or monthly withholding amounts

First calculate the weekly equivalent of fortnightly or monthly earnings. If you pay:

•

fortnightly - divide the sum of the fortnightly earnings and the amount of any allowances subject to withholding by two. Ignore any cents in the result and then add 99 cents.

•

monthly - obtain the sum of the monthly earnings and the amount of any allowances subject to withholding (if the result is an amount ending in 33 cents, add one cent). Multiply this amount by three and then divide by 13. Ignore any cents in the result and then add 99 cents.

Then calculate fortnightly or monthly withholding amounts as follows:

•

fortnightly - work out the rounded weekly withholding amount applicable to the weekly equivalent of earnings, before any adjustment for tax offsets. Multiply this amount by two.

•

monthly - work out the rounded weekly withholding amount applicable to the weekly equivalent of earnings, before any adjustment for tax offsets. Multiply this amount by 13, divide the product by three and round the result to the nearest dollar.

Using a formula

The withholding amounts shown in this schedule can be expressed in a mathematical form.

You should read this section with Statement of formulas for calculating amounts to be withheld.

If you have developed your own payroll software package, you can use the following formulas and the coefficients outlined below.

The formulas comprise linear equations of the form y = ax - b, where:

•

y is the withholding amount expressed in dollars

•

x is the weekly earnings rounded down to whole dollars plus 99 cents

•

a and b are the values of the coefficients for the formulas shown in the relevant Values of the coefficients a and b for each set of formulas tables.

Rounding of withholding amounts

Withholding amounts calculated as a result of applying the formulas are rounded to the nearest dollar. Results ending in 50 cents are rounded to the next higher dollar.

If no TFN is provided, ignore cents when you calculate withholding amounts.

Accounting software

Software written in accordance with the formulas in this schedule should be tested for accuracy against the withholding amounts obtained using the Withholding look-up tool. You should only use such software if it produces the exact amounts.

Values of the coefficients a and b for each set of formulas

Medicare levy parameters

Tax file number (TFN) declarations

The answers your employees provide on their Tax file number declaration determine the amount you need to withhold from their payments. A Tax file number declaration applies to any payments made after you receive the declaration. If you receive an updated declaration from an employee, it will override the previous one.

If an employee does not give you a valid Tax file number declaration within 14 days of starting an employer/employee relationship, you must complete a Tax file number declaration with all available details of the employee and send it to us.

When a TFN has not been provided

You must withhold 47% from any payment you make to a resident employee and 45% from a foreign resident employee (ignoring any cents), if all of the following apply:

•

they have not quoted their TFN

•

they have not claimed an exemption from quoting their TFN

•

they have not advised you that they have applied for a TFN or have made an enquiry with us.

If an employee states at question 1 of the Tax file number declaration they have lodged a Tax file number - application or enquiry for individuals with us, they have 28 days to provide you with their TFN.

If the employee has not given you their TFN within 28 days, you must withhold 47% from any payment you make to a resident employee and 45% from a foreign resident employee (ignoring any cents) unless we tell you not to.

Do not allow for any tax offsets or Medicare levy adjustment. Do not withhold any amount for:

•

Higher Education Loan Program (HELP) debts

•

Student Start-up Loan (SSL) debts (includes ABSTUDY SSL debts)

•

Trade Support Loan (TSL) debts

•

Financial Supplement debts.

When your employee has a HELP, SSL, TSL or Financial Supplement debt

If your employee has a HELP, SSL, TSL or Financial Supplement debt, you may need to withhold additional amounts from their payments. Your employee will need to notify you of this on their Tax file number declaration or Withholding declaration.

Work it out

To calculate additional withholding amounts for:

•

HELP, SSL or TSL debts - refer to HELP/SSL/TSL weekly tax table

•

Financial Supplement debts - refer to SFSS weekly tax table.

Allowances

Generally, allowances are added to normal earnings and the amount to withhold is calculated on the total amount of earnings and allowances.

For more information, refer to Withholding from allowances.

Leave loading

If you pay leave loading as a lump sum, you need to use Tax table for back payments, commissions, bonuses and similar payments to calculate withholding.

If you pay leave loading on a pro-rata basis, add the leave loading payment to the earnings for that period to calculate withholding.

Claiming tax offsets

If your employee chooses to claim their entitlement to a tax offset through reduced withholding, they must give you a Withholding declaration.

To work out your employee's annual tax offset entitlement into a weekly value, use the Ready reckoner for tax offsets. Deduct this amount from the amount shown in column 2, 3 or 4 of the Withholding look-up tool.

Ready reckoner for tax offsets

If the exact tax offset amount claimed is not shown in the ready reckoner, you add the values for an appropriate combination.

Example

Tax offsets of $422 claimed. Add values of $400, $20 and $2
= $8 + $0 + $0
= $8.

Therefore, reduce the amount to be withheld by $8.

Withholding declarations

An employee can use the Withholding declaration to advise you of a tax offset they choose to claim through reduced withholding. For more information on tax offsets, refer to Claiming tax offsets.

Employees can also use a Withholding declaration to advise you of changes to their situation that may vary the amount you need to withhold.

Changes that may affect the amount you need to withhold include:

•

becoming or ceasing to be an Australian resident for tax purposes

•

claiming or discontinuing a claim for the tax-free threshold

•

advising of a HELP, SSL, TSL or Financial Supplement debt (or changes to them)

•

entitlement to a seniors and pensioners tax offset.

When your employee provides you with a Withholding declaration it will take effect from the next payment you make. If you receive an updated declaration from an employee, it will replace the previous one.

An employee must have provided you with a valid Tax file number declaration before they can provide you with a Withholding declaration.

Medicare levy adjustments

To claim the Medicare levy adjustment (available to some low income earners with dependants), an employee must lodge a Medicare levy variation declaration with their Tax file number declaration.

For instructions on how to work out the Medicare levy adjustment, refer to Medicare levy adjustment weekly tax table.

Schedule 11 - Tax table for employment termination payments

For payments made on or after 1 July 2018

This document is a withholding schedule made by the Commissioner of Taxation in accordance with sections 15-25 and 15-30 of Schedule 1 to the Taxation Administration Act 1953 (TAA). It applies to withholding payments covered by paragraph 12-85(b) of Schedule 1 to the TAA.

Using this schedule

You should use this schedule if you pay an individual an amount that is either:

•

an employment termination payment (ETP)

•

a delayed termination payment - that is, a payment that would be an ETP but was paid more than 12 months after the relevant termination of employment.

If you employ individuals under a working holiday makers visa you must use the Tax table for working holiday makers for all payments made to them, including employment termination payments.

See also:

•

Taxation of termination payments for information about ETPs for employers and employees.

•

Delayed termination payments

Employment termination payments

An ETP is a lump sum payment you make:

•

to an employee when their employment is terminated (referred to as a 'Life benefit' ETP)

•

to an employee's estate because their employment has been terminated due to death (referred to as a 'Death benefit' ETP).

ETPs include lump sum payments paid upon resignation, retirement or death. A payment from a super fund is not an ETP.

A payment must generally be made within 12 months of termination to qualify as an ETP. A payment made outside 12 months is a delayed termination payment, unless we have given approval for the payment to be treated as an ETP.

Tax treatment of ETPs

ETPs can comprise of two different components:

•

a tax-free component

•

a taxable component.

You only withhold tax from the taxable component.

Depending on the type of ETP, the concessional tax treatment may be limited to the smaller of:

•

the ETP cap

•

the whole-of-income cap.

The top rate of tax applies to amounts paid in excess of these caps.

The ETP cap amount for the 2018-19 income year is $205,000. This amount is indexed annually.

The whole-of-income cap amount for the 2018-19 income year is $180,000. This amount is not indexed. This cap is reduced by any other taxable income payments your employee receives in the income year - for example, salary or wages you have paid to your employee.

In some cases, you may need to include an ETP in the taxable payments when working out the whole-of-income cap.

The ETP payment summary has an ETP code that you use to describe the type of ETP and which cap has been applied to it.

Find out about:

•

Payment summaries for more information about ETP codes

•

Taxation of termination payments

ETP caps

The following table lists the types of ETPs subject to withholding and the applicable cap for each type of payment.

* The tax-free base limit for the 2018-19 income year is $10,399 plus $5,200 for each year of completed year of service.

For payments in column 2 both caps are considered and the smaller cap applies. Withholding will be made at the top rate of tax on the amount over the smallest cap.

Find out about:

•

Working out the withholding amount

Steps to work out smallest cap

Follow these steps to work out the smaller of the ETP cap and whole-of-income cap.

Multiple payments for same termination

For various reasons, ETPs may be made in more than one instalment. Payments made after the initial payment subject to the ETP cap, will attract a lower ETP cap. This is because the cap amount is reduced by the amount of all previous payments for the same termination.

Lump sum payments that are not ETPs may also be subject to PAYG withholding. Use the applicable tax table to work out the amount to be withheld from these payments.

Do not allow for any tax offsets or Medicare levy adjustments.

Do not withhold any amount for:

•

Higher Education Loan Program (HELP) debts

•

Student Start-up Loan (SSL) debts

•

Trade Support Loan (TSL) debts

•

Financial Supplement debts.

See also:

•

Tax table for unused leave payments on termination of employment for unused annual leave, leave loading or long service leave payments.

Death benefit ETPs

A death benefit termination payment is received by a person after another person's death, in consequence of termination of the other person's employment. The amount you withhold depends on a number of factors including whether the payment is made:

•

directly to a dependant of the deceased

•

directly to a non-dependant of the deceased

•

to the trustee of the deceased estate.

Use table A to work out how much to withhold.

Find out about:

•

Deceased estates and their tax obligations

Working out the withholding amount

An ETP can be made up of a tax-free component and taxable component. You must withhold an amount from the taxable component, including death benefit ETPs.

Do not withhold from the tax-free component of the ETP.

If your employee who is receiving an ETP has given you their tax file number (TFN) on a Tax file number declaration, use table A to work out how much to withhold.

A Tax file number declaration remains effective for 12 months after you make the last payment to them.

Withholding amounts calculated by applying table A are rounded to the nearest dollar. Results ending in 50 cents are rounded upwards.

If the payment is to be made to a foreign resident you will need to check if there is a tax treaty with their country of residence. The full list of our tax treaties is maintained by Treasury and can be found at Australian Tax Treaties. If the ETP is assessable only in the other country because of the treaty, then no withholding is required.

If a foreign resident's ETP is assessable in Australia, you are required to withhold from the payment. Adjust the rates set out in table A to exclude the Medicare levy of 2%.

Find out about:

•

Taxation of termination payments for information about ETP components.

•

Tax file number declaration

•

What are tax treaties?

When a TFN has not been provided

You must withhold 47% from the taxable component of an ETP you make to a resident employee and 45% from a foreign resident employee (ignoring any cents) who has not given you their TFN.

Examples

Example 1: ETP cap

Lloyd is an employee of BigBiz Pty Ltd and is 41 years old. His preservation age is 60. He is made redundant from his position at BigBiz and receives an ETP of $45,000.

The ETP has no tax-free component.

BigBiz is required to withhold from the ETP. Lloyd has previously provided his TFN to BigBiz and claimed the tax-free threshold.

BigBiz classifies the payment as a genuine redundancy and, using table A, works out that only the ETP cap applies.

As Lloyd is under preservation age and his entire ETP fits within the ETP cap amount, BigBiz withholds $14,400 from Lloyd's ETP. This is 32% of Lloyd's taxable component of $45,000.

Example 2: Whole-of-income cap - payment less than cap

Jane is an employee of SmallBiz Pty Ltd and is 50 years old. Jane's preservation age is 60. Jane resigns from SmallBiz to start a new business.

Up until Jane's date of resignation, SmallBiz paid Jane salary and wages totalling $84,000. Under her employment contract, Jane will receive a 'golden handshake' of $10,000 from SmallBiz. This payment is an ETP and has a tax-free component of $2,000 (relating to service before July 1983) and a taxable component of $8,000. SmallBiz is required to withhold an amount under the PAYG withholding system. Jane had previously provided her TFN to SmallBiz.

SmallBiz does not withhold from the tax-free component of $2,000, but must withhold an amount from the taxable component of $8,000.

SmallBiz classifies the payment as a 'golden handshake'. Using table A and the following steps, SmallBiz works out which cap to apply and the withholding rate:

Step	SmallBiz action	Result
1	Adds up all taxable payments (excluding the ETP) paid to Jane.	$84,000
2	Subtracts the step 1 amount from $180,000. This is the calculated whole-of-income cap.	$96,000
3	Determines the smallest cap by comparing result from step 2 against ETP cap amount of $205,000.	Whole-of-income cap is smallest
4	Uses table A to determine withholding rate on amounts up to calculated whole-of-income cap of $96,000, remembering Jane is under preservation age.	32%
5	Uses table A to determine withholding rate on amounts above the whole-of-income cap of $96,000. As whole $8,000 ETP is under cap, no further calculation is required.	Nil

SmallBiz withholds $2,560 from Jane's ETP of $10,000. This is 32% of Jane's taxable component of $8,000.

Example 3: Whole-of-income cap - payment greater than cap

Chris is younger than his preservation age. He has his employment terminated by MediumBiz in January. His employment termination does not meet the criteria of a genuine redundancy.

MediumBiz paid Chris $50,000 in leave entitlements as a lump sum and $50,000 in salary and wages before his termination. In addition to this income, Chris is also paid $130,000 as an ETP comprising of a $100,000 taxable component and has a tax free component of $30,000 (relating to service before July 1983).

As the ETP is not a genuine redundancy, MediumBiz classifies the payment as a 'golden handshake'. Using table A and the following steps, MediumBiz works out which cap to apply and the withholding rate:

Step	MediumBiz action	Result
1	Adds up all taxable payments (excluding the ETP) paid to Chris.	$100,000
2	Subtracts the step 1 amount from $180,000. This is the calculated whole-of-income cap.	$80,000
3	Determines smallest cap by comparing result from step 2 against ETP cap amount of $205,000.	Whole-of- income cap is smallest
4	Uses table A to determine withholding rate on amounts up to calculated whole-of-income cap of $80,000, remembering Chris is under preservation age.	32%
5	Uses table A to determine withholding rate on amounts over the calculated whole-of-income cap of $80,000. An ETP of $100,000 less the cap amount $80,000 gives $20,000 over the cap.	47%

MediumBiz withholds $35,000 from Chris's ETP of $130,000. This is $25,600 ($80,000 x 32%) plus $9,400 ($20,000 x 47%) of Chris's taxable component of $100,000.

Example 4: ETP subject to both ETP cap and whole-of-income cap

Alec, 30, is made redundant by MacroBiz after 5 years of service and receives a termination payment of $65,678 that is part genuine redundancy ($40,678) and part gratuity ($25,000). Until his redundancy, Alec had received $140,000 in salary and wages for the income year.

In this situation the part of the payment that is subject to the ETP cap only is always dealt with first.

Alec's employer calculates the genuine redundancy amount over the tax-free limit* as $4,279. This is calculated as follows:

$40,678 less $36,399 due to the 5 years of service [$10,399 base limit plus $26,000 (5 x $5,200)]. The amount of $4,279 is an ETP.

Using table A, his employer works out that only the ETP cap applies. Alec is under preservation age, so MacroBiz withholds $1,369 (32% of $4,279).

Using table A and the following steps, MacroBiz then works out which cap to apply and the withholding rate on Alec's $25,000 gratuity part of the ETP.

Step	MacroBiz action	Result
1	Adds up all taxable payments, salary and wages paid to Alec.	$140,000
2	Subtracts the step 1 amount from $180,000. This is the calculated whole-of-income cap.	$40,000
3	Determines smallest cap by comparing result from step 2 against ETP cap of $200,721 (ETP cap $205,000 for 2018-19 less the $4,279 ETP).	Whole-of-income cap is smallest
4	Uses table A to determine withholding rate on amounts up to calculated whole-of-income cap of $40,000 remembering Alec is under preservation age.	32%
5	Uses table A to determine withholding rate on amounts over the calculated whole-of-income cap of $40,000. As the $25,000 gratuity is under the cap, no further calculation is required.	Nil

MacroBiz withholds $1,369 from the $4,279 part of the ETP for genuine redundancy and $8,000 from the $25,000 gratuity part of the ETP. MacroBiz must issue Alec with two separate ETP payment summaries covering each part of the payment.

* For more information about calculating the tax-free portion of a genuine redundancy payment, refer to Taxation of termination payments

Additional information

The ETP cap amount for the 2018-19 income year is $205,000. The amount is indexed annually.

The whole-of-income cap amount for the 2018-19 income year and future years is $180,000. This amount is not indexed.

A death benefit dependant for taxation purposes includes:

•

spouse of the deceased

•

child of the deceased under 18 years old

•

a person who had an interdependency relationship with the deceased

•

a person who was a dependant of the deceased just before the latter died.

A spouse of the deceased includes another person (of any sex) who:

•

was in a relationship with the deceased as registered under a prescribed state or territory law

•

lived with the deceased on a genuine domestic basis in a relationship as a couple, although not legally married.

A child of the deceased includes:

•

an adopted child, stepchild or ex-nuptial child

•

a child of the deceased's spouse

•

a child of the deceased within the meaning of the Family Law Act 1975 (for example, a child who is considered to be a child of a person under a state or territory court order giving effect to a surrogacy agreement).

An interdependency relationship includes:

•

a close personal relationship between two people who live together, where one or both provides for the financial and domestic support and personal care of the other

•

a close personal relationship between two people who live together but do not satisfy one or more of the requirements mentioned in the previous dot point due to either or both of them suffering from a physical, intellectual or psychiatric disability.

For further information on interdependency relationships and before accepting that a person is financially dependent, phone us on 13 10 20.

If an ETP will be paid to the trustee of a deceased estate, no amount should be withheld.

Rounding of withholding amounts

Withholding amounts calculated by applying this schedule are rounded to the nearest dollar. Results of 50 cents or higher are rounded upwards. If a TFN is not provided, ignore cents when calculating withholding amounts.

Delayed termination payments

Generally, a payment must be made within 12 months of termination to qualify as an ETP. A payment made after 12 months is a delayed termination payment, unless we have given approval for the payment to be treated as an ETP.

A delayed termination payment is not treated as an ETP. It must be reported in 'Gross payments' in the employee's PAYG payment summary - individual non-business.

When a TFN is provided

If your employee has given you their TFN, withhold an amount equal to 32% from the payment. Withholding amounts are rounded to the nearest dollar once calculated. Results ending in 50 cents are rounded to the next higher dollar.

When a TFN has not been provided

You must withhold 47% from the payment you make to a resident employee and 45% from a foreign resident employee (ignoring any cents) who has not given you their TFN.

Preservation age

The withholding amount varies depending on whether the employee has reached their preservation age by the end of the income year in which when the payment is made.

Preservation age is determined using your employee's date of birth. For example, if your employee was born on 1 October 1962, they will reach their preservation age of 58 on 1 October 2018 for the 2018-19 income year. The table below will help with this:

Payment summaries

You must provide your employee with one or more PAYG payment summary - employment termination payment forms within 14 days of making an ETP. The payment summary now includes an ETP code that you use to describe the type of payment, and determines which cap, ETP cap or whole-of-income cap is applied. Below is a table showing the type of ETPs and which code applies:

Life benefit ETP

Multiple payments for same termination

Death benefit ETP

Transitional termination payments were certain ETPs paid to an employee under an employment contract entered into before 10 May 2006. They were taxed concessionally if paid before 1 July 2012.

Find out about:

•

PAYG payment summaries and guidelines - payment summaries can also be printed using software that conforms with ATO reporting specifications

•

Software developers homepage for more details and reporting specifications

•

Taxation of termination payments for information about transitional ETPs.

Schedule 12 - Tax table for superannuation lump sums

For payments made on or after 1 July 2018

This document is a withholding schedule made by the Commissioner of Taxation in accordance with sections 15-25 and 15-30 of Schedule 1 to the Taxation Administration Act 1953 (TAA). It applies to withholding payments covered by paragraph 12-85(a) of Schedule 1 to the TAA.

Using this schedule

You should use this schedule if you make a super lump sum payment to an individual.

This schedule also provides information on the withholding requirements when an untaxed element of super interest is rolled over.

Super lump sums

A super lump sum payment includes a:

•

lump sum member benefit paid to an individual where a condition of release has been satisfied - for example, retirement, terminal medical condition, severe financial hardship, compassionate grounds

•

lump sum death benefit paid to an individual following the death of the member or account holder

•

commutation of a super income stream (part or all of a super income stream is exchanged for a lump sum).

A super lump sum may be paid from a super fund, approved deposit fund (ADF) or a retirement savings account (RSA).

Components of a super lump sum

Before you can work out the withholding amount, you must calculate the components of the super lump sum.

A super lump sum may have two components:

•

a tax-free component

•

a taxable component which can include an

-

element taxed in the fund (taxed element)

-

element untaxed in the fund (untaxed element).

You do not withhold from the tax-free component.

Working out the withholding amount

You must calculate the amount to withhold by applying the rates set out in table A if your payee:

•

is an Australian resident

•

receives a taxable component of a super lump sum

•

has provided you with their TFN.

These rates include the Medicare levy of 2%.

If the payment is to be made to a foreign resident you will need to check if there is a tax treaty with their country of residence. The full list of our tax treaties is maintained by Treasury and can be found in the Australian Tax Treaties table. If, because of the treaty, the super lump sum is assessable only in the other country, then no withholding is required.

If a foreign resident's super lump sum is assessable in Australia, you are required to withhold from the payment. Adjust the rates set out in table A to exclude the Medicare levy of 2%.

Different withholding rates apply for temporary residents who request a departing Australia superannuation payment. Phone us on 13 10 20 or follow the link below.

Find out more:

•

Australian Tax Treaties

•

Departing Australia superannuation payment

Payments not subject to PAYG withholding

The following super lump sums are not subject to PAYG withholding:

•

a payment made to a person who is suffering from a terminal medical condition

•

a payment made to a dependant after the death of the member or account holder

•

an amount paid to the trustee of a deceased estate after the death of the member.

When a TFN has not been provided

Different withholding rates apply where the payee of the super lump sum has not provided you with their TFN before the payment is made.

Paid to an Australian resident

•

Under 60 years old:

-

taxable component (taxed element and untaxed element) - withhold 47% (ignoring cents)

•

60 years old or over:

-

taxed element - no amount is required to be withheld

-

untaxed element - withhold 47% (ignoring any cents).

Paid to a foreign resident

Check if there is a tax treaty with the payee's country of residence. If the super lump sum is assessable in the other country, no withholding is required.

If the super lump sum is assessable in Australia, use the following withholding rates:

•

Under 60 years old:

-

taxable component (taxed element and untaxed element) - withhold 45% (ignoring any cents)

•

60 years old or over:

-

taxed element - no amount is required to be withheld

-

untaxed element - withhold 45% (ignoring any cents).

Do not allow for any tax offsets or Medicare levy adjustments. Do not withhold any amount for:

•

Higher Education Loan Program (HELP) debts

•

Student Start-up Loan (SSL) debts (includes ABSTUDY SSL debts)

•

Trade Support Loan (TSL) debts

•

Financial Supplement debts.

Find out about:

•

What are tax treaties?

Rollovers

If the person entitled to receive the super lump sum asks you to roll over their benefit, you are generally not required to withhold from any of the rolled-over amount.

However, if the rollover benefit consists of an untaxed element that exceeds the untaxed plan cap you are required to withhold at the following rates:

•

amount of the untaxed element up to the untaxed plan cap - no amount required to be withheld

•

amount of the untaxed element above the untaxed plan cap - withhold 49%.

A super lump sum death benefit cannot be rolled over - whether paid to dependants or non-dependants.

Example: Rollover contains an untaxed element

Tom asks his fund to roll over his super interest of $1.550 million which consists wholly of an untaxed element. The untaxed plan cap amount for 2018-19 is $1.490 million.

These are the amounts required to be withheld:

•

up to the untaxed plan cap = $1,480,000 (no withholding required)

•

above the untaxed plan cap = $70,000 ($1,550,000 - $1,480,000)

•

from $70,000 = $32,900 ($70,000 x 47%).

The net rollover of $1,517,100 ($1,550,000 - $32,900) is required to be reported to the receiving fund within 3 days to meet the SuperStream data and payments standard. You are also required to provide a statement to the member with 30 days of the rollover.

Find out about:

•

SuperStream

•

Untaxed plan cap

Table A: Withholding rates for super lump sums

Additional information

Low rate cap: For the 2018-19 income year, the low rate cap is $205,000 and is indexed annually. The low rate cap is:

•

in relation to super lump sums paid to an individual who has reached their preservation age, the maximum amount of the taxable component that is allowed the lowest rate of tax

•

a lifetime limit

•

allocated to the taxed element first before allocating the remaining low rate cap to the untaxed element.

Untaxed plan cap: For the 2018-19 income year, the untaxed plan cap is $1,480,000 and is indexed annually. For the low rate cap or the untaxed plan cap in prior years, phone us on 13 10 20 or visit Super.

Lump sum less than $200: There is no withholding required from the whole amount if it is paid by a regulated super fund, complying ADF or RSA provider as a super lump sum and it is the payee's entire benefit.

A terminal medical condition exists if:

•

two registered medical practitioners have certified, jointly or separately, that the member suffers from an illness, or has incurred an injury, that is likely to result in the member's death within 24 months of the date of certification

•

at least one of the registered medical practitioners is a specialist practicing in an area related to the member's illness or injury

•

the certification period has not ended for each of the certificates.

The certification period is 24 months from the date of certification.

A death benefit dependant for taxation purposes includes:

•

spouse of the deceased

•

child of the deceased under 18 years old

•

a person who had an interdependency relationship with the deceased

•

a person who was a dependant of the deceased just before the latter died

•

any individual who is paid a lump sum death benefit if the deceased died in the line of duty as a member of the defence force, a member of the Australian Federal Police or the police force of a state or territory, or a protective service officer (as defined in the Australian Federal Police Act 1979).

A spouse of the deceased includes another person (of any sex) who:

•

was in a relationship with the deceased that was registered under a law of a prescribed state or territory

•

lived with the deceased on a genuine domestic basis in a relationship as a couple, although not legally married.

A child of the deceased includes:

•

an adopted child, stepchild or ex-nuptial child

•

a child of the deceased's spouse

•

a child of the deceased within the meaning defined in the Family Law Act 1975 (for example, somebody who is considered to be a child of a person under a state or territory court order giving effect to a surrogacy agreement).

An interdependency relationship includes:

•

a close personal relationship between two people who live together, where one or both provides for the financial and domestic support and personal care of the other

•

a close personal relationship between two people who live together but do not satisfy one or more of the requirements mentioned in the previous dot point due to either or both of them suffering from a physical, intellectual or psychiatric disability.

For further information on interdependency relationships and before accepting that a person is financially dependent, phone us on 13 10 20.

Rounding of withholding amounts

Withholding amounts calculated by applying this schedule are rounded to the nearest dollar. Results of 50 cents or higher are rounded upwards. If a TFN is not provided, ignore cents when calculating withholding amounts.

Example: Super lump sum made by a super provider from a taxed element.

Heather and Dean are members of the AAFund super fund. They are 59 and 61 years old respectively. They have decided to retire and take some of their super as a lump sum. The preservation age for both of them is 55.

According to their entitlements, Heather and Dean will both receive a super lump sum of $250,000 from AAFund. Each super lump sum has a tax-free component of $30,000 and a taxable component of $220,000. Heather and Dean have previously provided their respective TFNs to AAFund.

AAFund does not need to withhold from the tax-free component of $30,000, but must withhold an amount from the taxable component of $220,000. The taxable component of the super lump sum paid by AAFund is wholly made up of taxed elements.

Amount to withhold for Heather:

As Heather is over her preservation age but is still under 60, she is entitled to the low rate cap.

a.

Amount up to low rate cap = $205,000 (2018-19 income year cap amount)

b.

Amount above low rate cap = $15,000 ($220,000 - $205,000)

c.

Amount to withhold from $15,000 = $2,550 (17% of $15,000)

Note: The low rate cap is indexed annually.

Amount to withhold for Dean:

As Dean is over 60 years old, no part of his super lump sum payment is subject to withholding.

Preservation age

The withholding amount varies depending on whether the payee has reached their preservation age when the payment is made.

Preservation age is determined using your payee's date of birth. For example, if a member was born on 1 October 1962, they will reach their preservation age of 58 on 1 October 2018. The table below will help with this:

Payment summaries

You must provide a PAYG payment summary - superannuation lump sum to the recipient of the super lump sum within 14 days of making a lump sum payment.

Payment summaries can also be printed using software that conforms to ATO reporting specifications.

For information and reporting specifications visit Software developers.

Schedule 13 - Tax table for superannuation income streams

For payments made on or after 1 July 2018

This document is a withholding schedule made by the Commissioner of Taxation in accordance with sections 15-25 and 15-30 of Schedule 1 to the Taxation Administration Act 1953 (TAA). It applies to withholding payments covered by paragraph 12-80(a) of Schedule 1 to the TAA.

Using this schedule

You should use this schedule if you make a payment of a super income stream, including a:

•

account-based super income streams - including death benefit income streams

•

capped defined benefit income streams - including death benefit income streams

•

transition to retirement income streams

•

temporary or permanent disability super income streams

Super income streams

A super income stream is a series of regular payments from a superannuation provider when the payee has satisfied a condition of release. These regular payments can be paid weekly, fortnightly, monthly, quarterly, or annually.

A super income stream may be:

•

an account-based super income stream

•

a capped defined benefit income stream which include a

-

lifetime pension, regardless of when it started

-

lifetime annuity that existed prior to 1 July 2017

-

life expectancy pension or annuity that existed prior to 1 July 2017

-

market-linked pension or annuity, that existed prior to 1 July 2017.

Note: a commutation of an income stream is not a super income stream payment. It is a super lump sum.

Defined benefit income cap

The general defined benefit income cap is $100,000 and is subject to indexation. The defined benefit income cap may be reduced below $100,000, depending on the payee's circumstances.

See also:

•

Conditions of release

•

Taxation Ruling TR 2013/5: When a super income stream commences and ceases for further information on starting and stopping an income stream

•

Tax table for superannuation lump sums

•

Super changes

•

Super changes for APRA-regulated funds

•

Varying your PAYG withholding

Components of a super income stream

Before you can work out the withholding amount, you must calculate the components of the super income stream.

A super income stream may have two components:

•

taxable component which can include either or both of an

-

element taxed in the fund (taxed element)

-

element untaxed in the fund (untaxed element).

•

the tax-free component

Tax file number (TFN) declarations

The answers your payees provide on their Tax file number declaration determine the amount you need to withhold from their payments. A Tax file number declaration applies to any payments made after you receive the declaration. If you receive an updated declaration from a payee, it will override the previous one.

If a payee does not give you a valid Tax file number declaration within 14 days of starting a payer/payee relationship, you must complete a Tax file number declaration with all available details of the payee and send it to us.

When a TFN has not been provided

You must withhold 47% for residents, and 45% for foreign residents, if a super income stream payment is made to your payee and they:

•

have not quoted their TFN

•

have not claimed an exemption from quoting their TFN

•

have not advised you they have applied for a TFN or have made an enquiry with us.

If a payee states at question 1 of the Tax file number declaration they have lodged a Tax file number - application or enquiry for individuals with us, they have 28 days to provide you with their TFN.

If the payee has not given you their TFN within 28 days, you must withhold 47% from any payment you make to a resident payee and 45% from a foreign resident payee from the relevant element(s) of the taxable component of the super income stream payment (ignoring any cents) unless we tell you not to.

Do not allow for any tax offsets or Medicare levy adjustments. Do not withhold any amount for:

•

Higher Education Loan Program (HELP) debts

•

Student Start-up Loan (SSL) debts (includes ABSTUDY SSL debts)

•

Trade Support Loan (TSL) debts

•

Financial Supplement debts.

When not to apply the no-TFN withholding rate

Do not apply the no-TFN withholding rate:

•

to the tax-free component, or taxed element of a capped defined benefit income stream, where the payee is 60 years old or over and the total of these amounts is below their defined benefit income cap

•

to the taxed element of an account-based super income stream where the payee is 60 years or over.

In these circumstances no withholding is required.

Example:

Heather is 85 and is in receipt of a capped defined benefit income stream from a fully funded defined benefit fund for the full year. Heather's super fund does not have her TFN. As Heather is receiving an income stream from a fully funded defined benefit fund with an annual entitlement of $80,000, her super fund does not apply the no-TFN withholding rate.

Working out the withholding amount

Factors to consider when working out the withholding amount include:

•

whether the payee is an Australian resident or foreign resident for tax purposes

•

the age of the payee

•

the frequency of the super income stream payments - for example, fortnightly, monthly

•

whether the payee is claiming the tax-free threshold

•

whether the payee is claiming the seniors and pensioners tax offset

•

whether the payee is receiving a disability super income stream

•

whether the super income stream includes an untaxed element (generally payments from state and Commonwealth public sector super schemes)

•

the type of super income stream

•

whether the total of the taxed elements and tax-free component is greater or less than the defined benefit income cap (the Cap)

•

whether the defined benefit income cap should be reduced

•

whether the income stream is a super death benefit income stream.

Payments to Australian residents

This schedule is divided into five parts. The amount required to be withheld from a super income stream is dependent on the type of super income stream you pay.

•

Account-based super income stream - use part A

•

Capped defined benefit income stream and

-

payee is under 60 years old at any time during the financial year, including

•

disability super income streams

•

death benefit (including reversionary) income streams where the deceased was aged less than 60 - use part A

(Note: where the payee turns 60 during the year you will need to complete part E for post 60 income stream payments)

-

payee turns 60 years old during the financial year or starts their super income stream part way through the year at age 60 or older - use part E for post 60 income stream payments.

-

payee is 60 years old or over for the full financial year

•

a taxable component - taxed element and or a tax-free component - use part B

•

a taxable component - untaxed element only - use part C

•

a mixture of the above components - use part D

-

payee is under 60 years old, and is in receipt of a death benefit (reversionary) capped defined benefit income stream and the deceased was 60 years old or older at the time of death - use part E

Payments to foreign residents

If the super income stream is to be made to a foreign resident, you will need to check if there is a tax treaty with their country of residence. If the super income stream is assessable in the other country because of the treaty, no withholding is required.

If a foreign resident's super income stream is assessable in Australia, you are required to withhold from the payment.

See also:

•

The full list of Australian Tax Treaties, as maintained by Treasury

•

What are tax treaties?

Rounding of withholding amounts

Ignore any cents in an income stream before using any of the steps in this schedule to calculate withholding. Withholding amounts calculated using the steps are rounded to the nearest dollar. Results ending in exactly 50 cents are rounded to the next highest dollar. Do this rounding directly - do not make a preliminary rounding to the nearest cent. Where no TFN has been provided, cents are ignored when withholding amounts are calculated.

Part A

Use this part where the payee is:

•

below 60 years of age and is receiving a super income stream

•

60 years of age or over and is receiving a super income stream that is not a capped defined benefit income stream with an untaxed element.

Note: if the payee turns 60 during the financial year and is in receipt of a capped defined benefit income stream, then you will also need to complete part E for post 60 income stream payments.

Taxable component contains taxed and untaxed elements

Step 1: Use the following table to work out which elements of the taxable component withholding applies to.

Note: Do not withhold where the payee is receiving an account-based super income stream with a taxed element and tax-free component and is aged 60 years or older.

Step 2 Use the appropriate PAYG withholding tax table to calculate the withholding amount relevant to the amount worked out in step 1. The tax table you use depends on the period the super income stream covers - that is, weekly, fortnightly or monthly.

Note: Some payees aged 60 years and over may be eligible to claim the seniors and pensioners tax offset (SAPTO). If the payee gives you a Withholding declaration indicating they want to claim a SAPTO entitlement through PAYG withholding, you should use the Tax table for seniors and pensioners to work out the amount to withhold from the amount calculated in step 1.

Step 3 Some payees may be eligible for a tax offset. Use the following table to work out the tax offset amount for the payee.

Step 4: For some payees, the application of the offset from step 3 leads to under withholding for their Medicare levy. An offset adjustment is required where the tax offset calculated in step 3 is great than zero. Use the applicable formulas below to calculate the offset adjustment amount. You will need to calculate the weekly equivalent of the taxable component or untaxed element if making fortnightly, monthly or quarterly payments. If an offset adjustment is not required to set the offset adjustment to zero.

Medicare levy parameters are contained in Statement of formulas for calculating amounts to be withheld.

Step 5: Calculate the notional amount to withhold by first subtracting the tax offset per payment (step 3) from the withholding amount (step 2).

Notional amount to withhold = withholding amount - tax offset


Then compare the notional amount to withhold with the offset adjustment amount calculated at step 4.

If the notional amount to withhold is:

•

less than the amount calculated at step 4, withhold the amount calculated at step 4

•

more than the amount calculated at step 4, withhold the notional amount to be withheld.

Tax-free component

If the super income stream is being paid to a payee under 60, you do not need to consider their tax-free component when calculating their withholding.

Example

This example uses the PAYG withholding tax tables that apply from 1 July 2018.

Case A: Payee is under 60 years old

Maree, 57, receives a fortnightly super income stream of $1,200 comprising:

•

a tax-free component of $300

•

a taxable component - taxed element of $900.

Maree's preservation age is 57.

Step 1: Maree is 57 years old therefore withholding applies to the taxable component.

Step 2: As Maree is paid fortnightly, use the Fortnightly tax table to work out the withholding required from the $900 taxed element. This amount is $42, assuming that Maree is claiming the tax-free threshold.

Step 3: Maree is entitled to a tax offset.

Tax offset = taxed element x 15%
= $900 x 15%
= $135

Step 4: Calculate Maree's fortnightly offset adjustment amount. As Maree's fortnightly payment is more than $844 (the Medicare levy threshold for singles, on a fortnightly basis) but less than $1,056 (the Medicare levy SOP for singles, on a fortnightly basis), her offset adjustment amount is calculated as:

Offset adjustment amount = (Taxable component - Medicare levy threshold for singles) x 0.10
= ($900 - $844) x 0.10
= $5.60
= $6 per fortnight (rounded to the nearest dollar)

Maree's offset adjustment amount is $6 per fortnight.

Step 5: To calculate the notional withholding amount, reduce the withholding amount ($42 as worked out in step 2) by the value of the tax offset ($135 as worked out in step 3). That is:

Notional withholding amount = $42 - $135 = -$93

Since the notional withholding amount is negative and less than the offset adjustment amount, the amount to be withheld from Maree's fortnightly super income stream is $6. This is the offset adjustment amount which will cover the Medicare levy payable.

Part B

Use this part if the payee is receiving a capped defined benefit income stream during the year and is:

•

60 years old or over and

•

their super income stream is made up of

-

tax-free component

-

taxable component - taxed element

-

tax-free component and the taxable component - taxed element.

Withholding steps

Step 1: Convert the super income stream compnents the payee received the period to an annualised amount and use the following table to work out whether withholding applies, and if so, what amount it applies to.

Step 2: Calculate the weekly, fortnightly or monthly equivalent of the amount from step one in excess of the Cap. For example, if you pay the payee weekly divide the excess by 52. If you pay fortnightly divide the excess by 26. If you pay monthly divide the excess by 12 (ignore cents in the result).

Step 3: Divide the amount calculated at step 2 by two (ignore cents in the result).

Step 4: Use the appropriate PAYG withholding tax table to calculate the withholding amount relevant to the amount worked out in step 3. The tax table you use depends on the period the income stream covers - that is, weekly, fortnightly or monthly.

These examples use the PAYG withholding tax tables that apply from 1 July 2018.

Case B(i): Capped defined benefit income stream where the annual entitlement is under the Cap

Courtney, 61, receives a fortnightly capped defined benefit income stream of $2,000 comprising of:

•

a tax-free component of $200

•

a taxable component - taxed element of $1,800.

Courtney is entitled to the full defined benefit income cap amount of $100,000 as there are no factors present that reduce this cap. The annual equivalent of Courtney's fortnightly super income stream ($52,000) is less than the defined benefit income cap of $100,000. As Courtney is over 60 years old and her capped defined benefit income stream is comprised wholly of a taxed element and tax-free component of less than $100,000 for the income year, no withholding is required.

Case B (ii): Capped defined benefit income stream where the annual entitlement exceeds the Cap

Bill, 63, receives a fortnightly capped defined benefit income stream of $5,550 comprising of:

•

a tax-free component of $550

•

a taxable component - taxed element of $5,000.

Bill is entitled to the full defined benefit income cap amount of $100,000 as there are no factors present that reduce this cap

Step 1 The annual equivalent of Bill's fortnightly capped defined benefit income stream is made up of an annualised tax-free component of $14,300 and annualised taxed element of $130,000 totalling $144,300 which is greater than the defined benefit income cap of $100,000. Withholding applies to 50% of the amount over the Cap. Go to step 2.

Step 2 Calculate the fortnightly equivalent of the amount in excess of the Cap.

$144,300 - $100,000 = $44,300

Bill is paid fortnightly, therefore:

$44,300/ 26 = $1,703 (ignoring cents)

Step 3 Divide the amount calculated at step 2 by two.

$1,703/ 2 = $851 (ignoring cents)

Step 4 Use the Fortnightly tax table to calculate the withholding amount relevant to the amount worked out in step 3.

As Bill has claimed the tax -free threshold the withholding amount is $28.

Part C

Use this part if the payee is receiving a capped defined benefit income stream and:

•

is 60 years old or over, and

•

their income stream is only made up of a taxable component - untaxed element.

Withholding steps

Step 1: Use the appropriate PAYG withholding tax table to calculate the withholding amount relevant to this pay period's taxable component - untaxed element. The tax table you use depends on the period the income stream covers - that is, weekly, fortnightly or monthly.

Note: Some payees may be eligible to claim the seniors and pensioners tax offset (SAPTO). If the payee gives you a Withholding declaration indicating they want to claim a SAPTO entitlement through PAYG withholding, you should use the Tax table for seniors and pensioners to work out the amount to withhold from the amount calculated in step 2.

Step 2: Determine the tax offset for the payment

Convert the untaxed element payee received this period to an annualised amount. Use the following table to work out the amount of tax offset that applies.

Step 3:

If the annualised amount from step 2 is less than the Cap then:

Tax offset = Untaxed element for the payment x 10%


If the annualised amount from step 2 is greater than the cap then the annual tax offset is capped at 10% of the cap. Therefore, the tax offset for the payment is reduced to the weekly, fortnightly or monthly equivalent of the capped tax offset amount.

Step 4:

Work out the amount to withhold by subtracting the tax offset per payment (step 3) from the withholding amount (step 1).

Amount to withhold = withholding amount - tax offset


If the tax offset amount is greater than the withholding amount, the amount to withhold is nil.

Example: Case C: Capped defined benefit income stream comprised of a taxable component - untaxed element only

This example uses the PAYG withholding tax tables that apply from 1 July 2018.

Vera, 68, receives a weekly super income stream of $2,000 comprised only of a taxable component - untaxed element.

Step 1 Using the Weekly tax table, the withholding amount relevant to the taxable component - untaxed element for $2,000 is $541 (Vera has claimed the tax-free threshold).

Step 1 The annual equivalent of Vera's weekly super income stream ($2,000 x 52 = $104,000) is greater than the defined benefit income cap of $100,000. Therefore, Vera's tax offset is capped at $10,000 for the income year.

Step 3 As Vera is over 60 years old she is eligible for a 10% tax offset of the untaxed element.

The tax offset amount is capped at $10,000. This weekly offset amount exceeds this cap ($200 x 52 = $10,400). Therefore, the tax offset is reduced to the weekly equivalent of the $10,000 annual capped amount.

Weekly tax offset = $10,000 / 52 = $192 (ignore cents)

Step 4 Work out the amount to withhold by subtracting the tax offset per payment (step 3) from the withholding amount (step 1).

Amount to withhold = withholding amount - tax offset
= $541 - $192
= $349

Part D

Use this part where the payee is receiving a capped defined benefit income stream and:

•

is 60 years old or over, and

•

their income stream is made up of one or more of

-

tax-free component and/or taxable component - taxed element

-

taxable component - untaxed element.

Withholding steps

Work out the amount subject to withholding

Step 1: Convert all of the components of the whole income stream the payee received during this period to an annualised amount.

Then add together all the annualised components that make up the income stream to determine whether you go to step 2 or part C.

Step 2: Add the annualised tax-free component and annualiesed taxed element. Subtract the cap from this amount. If this is less than the cap, go to step 5.

Step 3: Calculate the weekly, fortnightly or monthly equivalent of the amount at step 2. For example, if you pay the payee weekly divide the excess by 52. If you pay fortnightly divide the excess by 26. If you pay monthly divide the excess by 12 (ignore cents in the result).

Step 4: Divide the amount calculated at step 3 by two (ignore cents in the result). The result is the amount subject to withholding.

Step 5: Calculate the weekly, fortnightly or monthly equivalent of the untaxed element and add this to the amount calculated at step 4 (if applicale).

Step 6: Use the appropriate PAYG withholding tax table to calculate the withholding amount relevant to the amount worked out in step 5. The tax table you use depends on the period the income stream covers - that is, weekly, fortnightly or monthly.

Calculate the tax offset applicable

Step 7: If the sum of the annualised tax-free component and the annualised taxed element is equal or greater than the cap then the payee is not entitled to a tax offset.

If the amount at step 2 is less than the cap, the payee is entitled to a tax offset. Apply 10% to this amount. The result is an annual tax offset amount.

Calculate the weekly, fortnightly or monthly equivalent of this tax offset. For example, if you pay the payee weekly divide the amount by 52. If you pay fortnightly divide the amount by 26. If you pay monthly divide the amount by 12 (ignore cents in the result).

Work out the amount to withhold

Step 8: Subtract the tax offset per payment (step 7) from the withholding amount (step 6).

Amount to withhold = withholding amount - tax offset


These examples use the PAYG withholding tax tables that apply from 1 July 2018.

Example: Case D: Payee is over 60 years old, and receives all elements of a capped defined benefit income stream

Nancy, 75, receives a capped defined benefit income stream for the financial year of $212,000 comprising of the annualised:

•

taxable component - taxed element $120,000

•

taxable component - untaxed element $62,000

•

tax-free component $30,000.

Nancy is paid weekly and claims the tax-free threshold.

Work out the amount subject to withholding

Step 1 Add together all the components.

$120,000 + $62,000 + $30,000 = $212,000

As the sum is over the $100,000 Cap, proceed to step 2.

Step 2 Add together the tax-free component and taxed element. Subtract the $100,000 cap from this amount.

Sum of tax-free component and taxed element

$120,000 + $30,000 = $150,000

Amount in excess of cap

$150,000 - $100,000 = $50,000

Step 3 Calculate the weekly equivalent of the amount in excess of $100,000 calculated at step 2.

$50,000 / 52 = $961 (ignore cents)

Step 4 Divide the amount calculated at step 3 by two.

$961 / 2 = $480 (ignore cents)

Step 5 Calculate the weekly equivalent of the untaxed element of the taxable component $1,192 ($62,000/52) and add it to the amount calculated at step 4 ($480).

$1,192 + $480 = $1,672

Step 6 Using the Weekly tax table, the withholding amount relevant to the amount calculated in step 5 is $415.

Calculate the tax offset applicable

Step 7 Determine any entitlement to the tax offset. As the sum of Nancy's taxed element and tax-free component is over $100,000 she is no longer eligible for a tax offset for the untaxed element.

Work out the amount to withhold

Step 8 Amount to withhold = withholding amount (step 6) - tax offset (step 7)

= $415 - 0

Total amount to withhold is $415.

Example: Case D(ii)

Fred, 68, receives a capped defined benefit income stream (annualised) for the full financial year of $115,000 comprising of:

•

taxable component - taxed element $82,000

•

taxable component - untaxed element $23,000

•

tax-free component $10,000.

Fred is paid fortnightly and claims the tax-free threshold.

Work out the amount subject to withholding

Step 1 Add together all the components.

$82,000 + $23,000 + $10,000 = $115,000

As the sum is over the $100,000 Cap, proceed to step 2.

Step 2 Add together the tax-free component and taxed element. Subtract the $100,000 Cap from the result.

Sum of tax-free component and taxed element.

$10,000 + $82,000 = $92,000

Amount in excess of cap.

$92,000 - $100,000 = - $8,000

As $92,000 is less than $100,000 there is no excess amount.

Step 3 & Step 4 These steps are not necessary as no excess amount was calculated at step 2.

Step 5 Add the untaxed element of the taxable component $884 (i.e. fortnightly equivalent of $23,000) to the amount calculated at step 4 (Nil).

$884 + Nil = $884

Step 6 Using the Fortnightly tax table, the withholding amount relevant to the amount calculated in step 5 is $38.

Calculate the tax offset applicable

Step 7 As Fred's tax-free component and taxed element is less than the $100,000 Cap then he is entitled to a tax offset limited to the amount up to the Cap.

Tax offset = ($100,000 - amount at step 2) x 10%

($100,000 - $92,000) x 10% = $800

The tax offset amount is capped at $800.

As Fred is being paid on a fortnightly basis divide the offset by 26.

$800/ 26 = $30 (ignore cents).

Work out the amount to withhold

Step 8 Amount to withhold = withholding amount (step 6) - tax offset (step 7)

= $38 - $30

Total amount to withhold is $8.

Example: Case D(iii)

Bob, 70, receives a capped defined benefit income stream (annualised) for the full financial year of $210,000 comprising of:

•

taxable component - taxed element $0

•

taxable component - untaxed element $180,000

•

tax-free component - $30,000.

Bob is paid weekly and claims the tax-free threshold.

Work out the amount subject to withholding

Step 1 Add together all the components.

$0 + $180,000 + $30,000 = $210,000

As the sum is over the $100,000 Cap, proceed to step 2.

Step 2 Add together the tax-free component and taxed element. Subtract the $100,000 Cap from this amount.

$30,000 + $0 = $30,000
30,000 - $100,000 = -$70,000

As $30,000 is less than the $100,000 Cap there is no excess amount.

Step 3 & Step 4 These steps are not necessary as no excess amount was calculated at step 2.

Step 5 Add the untaxed element of the taxable component $3,461 (i.e. weekly equivalent of $180,000) to the amount calculated at step 4 (Nil).

$3,461 + Nil = $3,461

Step 6 Using the Weekly tax table, the withholding amount relevant to the amount calculated in step 5 is $1,110.

Calculate the tax offset applicable

Step 7 As Bob's tax-free component is less than the $100,000 Cap then he is entitled to a tax offset limited to the amount up to the Cap.

Tax offset = ($100,000 - amount at step 2) x 10%

($100,000 - $30,000) x 10% = $7,000

The tax offset amount is capped at $7,000

As Bob is paid weekly divide the offset by 52.

$7,000/52 = $134 (ignore cents)

Work out the amount to withhold

Step 8 Amount to withhold = withholding amount (step 6) - tax offset (step 7)

= $1,110 - $134

Total amount to withhold is $976

Part E

Use this part if the payee:

•

was 60 years old or older for the full financial year and they started their capped defined benefit income stream for the first time part way during the year [complete step 1(a)], or

•

turned 60 during the financial year and are in receipt of a capped defined benefit income stream [complete step 1(b)], or

•

was aged 59 years or younger for the full financial year and has capped defined benefit income stream that is a death benefit (reversionary) income stream where the deceased was aged 60 or over at the time of death [complete step 1(c)].

Note: If the payee is in receipt of multiple capped defined benefit income streams (maybe from multiple sources) or where the payee is in receipt of their own income stream at the same time as they are receiving a death benefit (reversionary) income stream then the reduction of the cap may not be correct in all circumstances.

Steps to reduce the defined benefit income cap

These examples use the PAYG withholding tax tables that apply from 1 July 2018.

Case E (i): Turning 60 during the financial year

On 1 July 2018 Loraine was 59 years old receiving a capped defined benefit income stream for the full year. Loraine turns 60 on 12 September 2018. Loraine's income stream paid to her prior to turning 60 will be taxed according to part A.

The character of this income changes when she turns 60 and therefore she will be subject to a different tax treatment on the income she receives after she turns 60.

To calculate withholding on any payment made on or after Loraine's birthday, apply the steps outlined in this example.

Loraine receives a fortnightly income stream of $5,200 for the full year made up of the following:

•

a tax-free component of $400

•

a taxable component - taxed element of $4,800.

A. Work out Loraine's reduced defined benefit income cap for the 2019 financial year as follows:

•

Step 1 Number of days from Loraine's birthday to 30 June 2019 is 292.

•

Step 2 Step 1 result expressed as a percentage of the year: 292/365 = 80%

•

Step 3 Multiply the general defined benefit cap by step 2 result: $100,000 × 80%.

Loraine's reduced defined benefit income cap is $80,000.

B. Annualise the components that make up Loraine's super income stream:

•

a fortnightly tax-free component of $400.
Annualised amount $10,400 ($400 x 26)

•

a taxable component - taxed element of $4,800.
Annualised amount $124,800 ($4,800 x 26)

C. Add the annualised amounts of each component
$10,400 + $124,800 = $135,200

D. Work out the amount of income Loraine earned after she turned 60.
Multiply the annual equivalent (step C) of Loraine's fortnightly super income stream by the percentage worked out at step 2.
$135,200 × 80% = $108,160

E. Work out the remaining fortnights in the financial year from when Loraine turned 60 that withholding applies:
292 days/14 days = 20

F. Work out the withholding rate as follows:

(i) Calculate the fortnightly equivalent of the amount in excess of her reduced cap of $80,000.
$108,160 - $80,000 = $28,160

Loraine is paid fortnightly, therefore:
$28,160/ 20 (remaining fortnights) = $1,408 (ignoring cents)

(ii) Divide the amount calculated at (i) by two.
$1,408/ 2 = $704 (rounded to the nearest dollar)

(iii) Use the Fortnightly tax table to calculate the withholding amount relevant to the amount worked out in (ii).

As Loraine has claimed the tax-free threshold the withholding amount is $0.

Note: You will need to provide a PAYG payment summary - superannuation income stream for payments made to the payee before turning 60 and a separate payment summary for payments made to the payee after turning 60, even if the withholding amount is zero.

If a payee only had a untaxed element or a combination of all three elements then you will need to go to part C or part D respectively to work out the withholding after determining the reduced defined benefit income cap. However the following changes to certain steps in each of these parts will be required:

•

Multiply step 2 of part C or step 1 of part D (the annualised amount) by the percentage of the financial year the payee is 60 years or over (the figure from step 2 in the Steps to reduce the defined benefit cap section). Use this figure in the relevant steps in part C or part D instead of the annualised amount.

•

In step 2 of part B or step 3 and step 5 of part D, divide the relevant excess amount by the number of the relevant periods in the financial year since the payee turned 60 to the end of the financial year.

•

In step 3 of part C and step 7 of part D, divide the relevant capped offset amount by the number of relevant periods in the financial year since the payee turned 60 to the end of the financial year.

Case E (ii): Turning 60 during the financial year - income stream made up of other components

Using Loraine's circumstances from the previous example, if Loraine receives fortnightly income of $6,000 which was made up of $2,000 tax-free component, $3,000 taxed element and $1,000 untaxed element. Loraine turns 60 on the 12 September 2018.

Step 1 Convert all of the components of the income stream to an annualised amount.

Total income stream $6,000 x 26 = $156,000
Taxed element $3,000 x 26 = $78,000
Untaxed element $1,000 x 26= $26,000
Tax-free component $2,000 x 26 = $52,000

Step 2 Apply the percentage that Loraine was over 60 to the whole of the annualised income stream
$156,000 x 80% = $124,800

Step 3 From step 2 in part D add together the annualised tax-free component and taxed element
$52,000 + $78,000 = $130,000

Step 4 Subtract Loraine's reduced cap of $80,000 from $130,000.
Result is $50,000

Step 5 Divide the result in step 4 by the remaining fortnights
$50,000/20 = $2,500 (ignore cents)

Step 6 Divide the amount at step 5 by two.
$2,500/2 = $1,250.

Add Loraine's fortnight untaxed element amount $1,000. This totals $2,250. Using the Fortnightly tax table the withholding amount for $2,250 is $452.

As Loraine's annualised tax-free component and taxed element is above her cap no tax offset is applicable.

Case E (iii): Starting an income stream during the financial year

Sarah is 65 years old and she first starts her capped defined benefit income stream on the 30 December 2018.

Sarah's reduced defined benefit income cap for the 2019 financial year is worked out as follows:

•

Step 1 Number of days from Sarah's first income stream payment to 30 June 2019 = 183

•

Step 2 Step 1 result expressed as a percentage of the year:
183/365 = 50.137%

•

Step 3 Multiply the general defined benefit cap by step 2 result:
$100,000 × 50.137%

Sarah's reduced defined benefit income cap is $50,137.

Sarah's income stream for the period between 30 December 2018 and 30 June 2019 comprises of a:

•

taxable component - taxed element: $40,000

•

taxable component - untaxed element: $20,000

•

tax-free component: $15,000

Sarah's total income stream payments from 30 December 2018 are $75,000.

Sarah is paid fortnightly and claims the tax-free threshold.

As Sarah is paid fortnightly you will need to work out the remaining fortnights that withholding applies in the financial year from when the income stream commenced to be paid:
183 days/14 days = 13

Work out the amount subject to withholding

Step 1 Add together all the annualised components.
$40,000 + $20,000 + $15,000 = $75,000

As the sum is over the $50,137 reduced Cap, proceed to step 2.

Step 2 Add together the annualised tax-free component and taxed element. Subtract the $50,137 reduced cap from this amount.

Sum the annualised tax-free component and taxed element
$40,000 + $15,000 = $55,000

Amount in excess of cap
$55,000 - $50,137 = $4,863

Step 3 Calculate the fortnightly equivalent of the amount in excess of $50,137 calculated at step 2 by using the number of remaining fortnights in the financial year from when the income stream commenced.
$4,863/13 = $374 (ignore cents)

Step 4 Divide the amount calculated at step 3 by two.
$374/ 2 = $187 (ignore cents)

Step 5 Calculate the fortnightly equivalent of the untaxed element of the taxable component using the remaining fortnights in the financial year from when the income stream started and add it to the amount calculated at step 4
($20,000/13) + $187
$1,538 + $187 = $1,725

Step 6 Using the Fortnightly tax table, the withholding amount relevant to the amount calculated in step 5 is $270.

Calculate the tax offset applicable

Step 7 Determine any entitlement to the tax offset. As the sum of Sarah's taxed element and tax-free component is over $50,137, she is no longer eligible for a tax offset for the untaxed element.

If Sarah were eligible you would apply the following:

•

If the sum of the annualised tax-free component and taxed element is less than the reduced Cap, the payee is entitled to a reduced tax offset. Subtract from the reduced Cap the sum of the tax-free component and the taxed element from step 2 and apply 10% to this amount. The result is the tax offset amount the payee is entitled to for the financial year.

•

Calculate the weekly, fortnightly or monthly equivalent of this tax offset amount for the remaining weeks, fortnights or months that withholding applies in the financial year from when the income stream commenced to be paid. For example, if the income stream started on 30 December 2018 and you pay the payee weekly divide the amount by 26. If you pay fortnightly divide the amount by 13. If you pay monthly divide the amount by 6 (ignore cents in the result).

Work out the amount to withhold

Step 8 Amount to withhold = withholding amount (step 6) - tax offset (step 7)
= $270 - 0

Total amount to withhold is $270.

Case E (iv): Starting an income stream during the financial year - income stream does not include all components

If Sarah only had a tax-free component and/or a taxable component - taxed element or an untaxed element then you will need to go to part B or part C respectively to work out the withholding after determining the reduced defined benefit income cap. However the following changes to certain steps in each of these parts will be required:

•

In step 1 of part B and step 2 of part C instead of converting the income stream payment to an annualised amount, use the Conversion table for income streams commencing during current financial year to work out the converted amount of the super income stream. Use this figure in the relevant steps in part B or part C instead of the annualised amount.

•

In step 2 of part B, divide the relevant excess amount by the number of remaining periods in the financial year since the income stream started or the payee turned 60 to the end of the financial year. Use the Conversion table for income streams commencing during current financial year to work out the appropriate date.

•

In step 3 of part C, divide the relevant capped offset amount by the number of remaining periods in the financial year since the income stream started or the payee turned 60 to the end of the financial year. Use the Conversion table for income streams commencing during current financial year to work out the appropriate date.

Case E (v): Reversionary income where the payee is under 60 years old and the deceased was at least 60 years old

Freya, 57, receives a defined benefit income stream in her own right, and her income stream is taxed under part A of this schedule.

Freya's partner died on 27 February 2019; Freya's partner was aged 61 at the time of death and was in receipt of a defined benefit income stream with both tax-free components and taxable components. Freya is now entitled to a reversionary income stream.

As Freya's reversionary income stream was subject to concessional tax treatment, Freya's reversionary income stream is also subject to additional taxation arrangements.

Freya's reduced defined benefit income cap for the 2019 financial year is worked out as follows:

•

Step 1 Number of days from Freya's first income stream payment to 30 June 2019 is 124

•

Step 2 Step 1 result expressed as a percentage of the year:
124/365 = 33.973%

•

Step 3 Multiply the general defined benefit cap by step 2 result:
$100,000 × 33.973%

•

Freya's reduced defined benefit income cap is $33,973.

Freya was also receiving a defined benefit income stream in her own right, her defined benefit income cap will be further reduced by the defined benefit income she received from the date of death of her partner.

Freya is paid fortnightly and her own super income for the financial year is $70,000 which comprises of a:

•

taxable component - taxed element $60,000

•

taxable component - untaxed element $0

•

tax-free component $10,000.

Her income stream is also taxed under part A of this schedule.

Reversionary Cap $33,973 - (0.33973 × $70,000).

Freya's reduced Defined Benefit Cap is now $10,192 (rounded to the nearest dollar)

Freya's Reversionary income stream comprises of a:

•

taxable component - taxed element $30,000

•

taxable component - untaxed element $10,000

•

tax-free component $10,000.

Freya's total reversionary income stream payment from 28 February 2019 is $50,000.

Reversionary income in excess of the reduced cap of $10,192 is $39,808.

Calculate Freya's withholding on her reversionary income stream

Use part C to work out Freya's withholding amount, however you will need to work out the remaining fortnights in the financial year from when the income stream started, to apply the correct withholding as per previous examples.

Step 1 Calculate the fortnightly tax-free component and taxed element in excess of the reduced cap.
$40,000 - $10,192 = $29,808

Freya is paid fortnightly from 28 February 2019, therefore:
$29,808/8 = $3,726 (ignoring cents)

Step 2 Divide the amount calculated at step 1 by two.
$3,726/2 = $1,863 (ignoring cents)

Step 3 Convert the untaxed element into fortnightly payments.
$10,000/8 = $1,250

Step 4 Add the amounts calculated at step 2 and step 3
$1,863 + $1,250
= $3,113

Step 5 Use the Fortnightly tax table to calculate the withholding amount relevant to the amount worked out in step 4.

Freya recognises that she has multiple taxable income streams and therefore has not claimed the tax -free threshold on her reversionary income stream payment, as such the withholding amount on $3,113 is $1,006.

Step 6 As the reversionary income stream tax-free and taxed element components totalled more than Freya's reduced defined benefit income cap, she is not entitled to a tax offset.

PAYG payment summary reporting

Freya will receive two PAYG payment summaries - superannuation income stream:

(1) PAYG payment summary - superannuation income stream
(personal income stream)

Applicable dates: 01/07/2018 - 30/06/2019

Tax withheld $3,276

Taxable component - taxed element $60,000

Taxable component - untaxed element $0

Tax-free component $10,000

Tax offset $9,000

(2) PAYG payment summary - superannuation income stream
(reversionary income stream)

Applicable dates: 28/02/2019 - 30/06/2019

Tax withheld $8,048

Taxable component - taxed element $30,000

Taxable component - untaxed element $10,000

Tax-free component $10,000

As the source of this income stream was from an income stream that was subject to concessional tax treatment, no tax offset should be provided on the payment summary. The ATO will calculate any entitlement to a tax offset upon assessment.

If Freya's circumstances were different:

You would not reduce Freya's defined benefit income cap and you would follow the steps in part B, part C or part D (as applicable) to calculate the withholding amount if:

•

Freya was 60 years or over for the full financial year and was receiving the reversionary income stream for the full financial year, whether her husband died before or after he was 60, or

•

Freya turns 60 during the financial year and her husband died aged 60 or over, and she was in receipt of the reversionary income stream for the full financial year

If Freya was under 60 for the full financial year and Freya's husband had died before he turned 60, you would not reduce the defined benefit income cap and you would follow the steps in part A to calculate the withholding amount.

If Freya was turns 60 during the financial year and her husband died aged under 60, and she was in receipt of the reversionary income stream for the full financial year, you would reduce the defined benefit income cap based on the date she turned 60 years of age and you would follow the relevant steps that are set out in the Lorraine examples to calculate the withholding amount.

If Freya was 60 or over for the full financial year or turns 60 during the financial year, and she received the reversionary income stream for part of the year you would reduce the defined income cap based on either the day she turned 60 or the start of the income stream. You would follow the steps in part B, part C or part D (as applicable) to calculate the withholding amount. However the following changes to certain steps in each of these parts will be required:

•

In step 1 of part B and step 2 part C or part D, instead of converting the income stream payment to an annualised amount, use the Conversion table for income streams commencing during current financial year to work out the converted amount of the super income stream. Use this figure in the relevant steps in part B, part C or part D instead of the annualised amount.

•

In step 2 of part B or step 3 and step 5 of part D, divide the relevant excess amount by the number of remaining periods in the financial year since the income stream started or the payee turned 60 to the end of the financial year. Use the Conversion table for income streams commencing during current financial year to work out the appropriate date.

•

In step 3 of part C or step 3 and step 5 in part D, divide the relevant capped offset amount by the number of remaining periods in the financial year since the income stream started or the payee turned 60 to the end of the financial year. Use the Conversion table for income streams commencing during current financial year to work out the appropriate date.

Super death benefits

Dependants

Dependants include all children of the deceased under 18 years old, any spouse of the deceased (including a former spouse and a current or former de facto spouse), and any person with whom the deceased had an interdependency relationship.

An interdependency relationship includes a close personal relationship between two people who live together, where one or both provides for the financial and domestic support and personal care of the other.

A dependant can also be a person who was financially dependent on the deceased. Before accepting that a person is financially dependent, phone us on 13 10 20.

Non-dependants

A person who is not a dependant of the deceased is not able to receive a super income stream from the deceased. A super death benefit income stream that was being paid to a non-dependant prior to 1 July 2007 is taxed in the same manner as a super death benefit income stream paid to a dependant.

Reversionary income streams

A death benefit income stream can either be a reversionary or non-reversionary. A death benefit (reversionary )income stream is a super income stream that reverts to the reversionary beneficiary automatically upon the member's death, if the death benefit payment is not a reversionary income stream then it is treated the same as if it was the member's income stream.

Defined benefit income cap

The defined benefit income cap is relevant if the payee is:

•

60 years or over, or

•

under 60 years of age and a death benefits dependant, where the deceased died at 60 years of age or over.

The defined benefit income cap applies if the payee receives one or more superannuation income stream benefits that are 'defined benefit income' to which 'concessional tax treatment' applies. The defined benefit income cap does not have taxation consequences outside of these circumstances.

The defined benefit income cap is an annual cap that is reset, and may be reduced, each year. From 1 July 2017, the 'defined benefit income cap' limits the amount of tax-free income the payee can receive from a capped defined benefit income stream (pension or annuity).

For the 2019 financial year, the defined benefit income cap will be $100,000 (the $1.6 million general transfer balance cap divided by 16).

See also:

•

Law Companion Ruling LCR 2017/1.

Preservation age

The withholding amount varies depending on whether the payee has reached their preservation age when the payment is made.

Preservation age is determined using your payee's date of birth. For example, if a member was born on 1 October 1961, they will reach their preservation age of 57 on 1 October 2018. The table below will help with this:

Cap conversion table

The full year cap on defined benefit income streams is $100,000 as of 1 July 2018, and is subject to indexation. The cap may also need to be reduced - see part E.

The table below converts the $100,000 cap into the weekly, fortnightly or monthly equivalent.

Conversion table for income streams commencing during current financial year

The table below can be used to determine the period to use for calculating withholding for income streams that start during the financial year:

Payment summaries

You must issue a PAYG payment summary - superannuation income stream to the member for the total of the payments made in the income year. This must be provided by 14 July. This date may be earlier if the member requests it.

Payment summaries can also be printed using software that conforms with our reporting specifications.

See also:

•

Payment summary information and reporting specifications on our Software developers website

Schedule 15: Tax table for working holiday makers

For payments made on or after 1 July 2018

This document is a withholding schedule made by the Commissioner of Taxation in accordance with sections 15-25 and 15-30 of Schedule 1 to the Taxation Administration Act 1953 (TAA). It applies to withholding payments covered by section 12-35 of Schedule 1 to the TAA.

Using this schedule

This schedule applies to payments to individuals - including backpackers - who are working in Australia and hold at the time of the payment a:

a.

Working holiday makers visa (subclass 417), or

b.

Work and holiday makers visa (subclass 462), or

c.

Bridging visa permitting the individual to work in Australia if:

i.

the bridging visa was granted under the Migration Act 1958 in relation to an application for a visa of a kind described in paragraph (a) or (b); and

ii.

the Minister administering that Act is still to make a decision in relation to the application; and

iii.

the most recent visa, other than a bridging visa, granted under that Act to the individual was a visa of a kind described in paragraph (a) or (b).

This schedule applies to all payments made to working holiday makers, including:

•

salary and wages

•

allowances

•

termination payments

•

unused leave

•

return to work payments

•

back payments, commissions, bonuses and similar payments

•

¦ payments to actors and entertainers.

If you employ individuals under the Seasonal Worker Programme, the tax table for working holiday makers does not apply.

Find out about:

•

Working out the withholding amount

•

Registered employer

•

Unregistered employer

•

Using a formula

•

Table A: Working holiday makers income tax rates

•

Rounding of withholding amounts

•

Accounting software

•

TFN declarations

•

PAYG withholding publications

Working out the withholding amount

To work out the amount you need to withhold, you must:

•

put the total payments you will make to your employee for the pay period into the Withholding look-up tool

•

use the appropriate column to find the correct amount to withhold

-

Column 2 if you are registered and total payments you have made to the employee for the income year prior to this payment are less than $37,001, and the employee has given you a tax file number (TFN)

-

Column 3 if you are registered and total payments you have made to the employee for the income year prior to this payment are from $37,001 to $90,000, and the employee has given you a TFN

-

Column 4 if you are registered and total payments you have made to the employee for the income year prior to this payment are from $90,001 to $180,000, and the employee has given you a TFN

-

Column 5 if you are registered and total payments you have made to the employee for the income year prior to this payment are more than $180,000, and the employee has given you a TFN

-

Column 6 if you are registered and the employee has not given you a TFN.

Example 1: Using the Withholding look-up tool

A foreign resident employee is working in Australia under a working holiday makers visa (subclass 417) and has earnings for the week of $680.70. The employee has provided their TFN on a Tax file number declaration, and the total payments you have made to this employee do not exceed $37,000 for the 2018-19 income year.

To work out the correct amount to withhold, put $680 into the Withholding look-up tool (ignore cents).

The tool will automatically calculate the withholding result of $102 (Column 2, registered employer and employee has given you a TFN).

Registered employer

You need to register with us before you employ a working holiday maker. If you are registered, you will be able to withhold at a flat rate of 15% up to $37,000 in total payments made to each individual working holiday maker within an income year. Where total payments exceed $37,000, see Table A below for the applicable withholding rate.

Next steps:

•

Working holiday maker employer registration tool

Unregistered employer

If you have not registered with us to withhold at working holiday maker tax rates, you are required to withhold at foreign resident rates as specified in the tax tables for weekly, fortnightly or monthly payments.

Using a formula

If you have developed your own payroll software package, you can use the formulas and coefficients outlined below to calculate the withholding amount.

The formulas comprise linear equations of the form y = ax , where:

•

y is the amount to be withheld expressed in dollars

•

x is total payment made to the employee for the pay period, ignoring any cents

•

a is the value of the coefficient as shown in Table A.

Table A: Working holiday makers income tax rates

The following tax rates for 2017-18 apply for working holiday makers holding a subclass 417 or 462 visa from 1 July 2017.

If no TFN is provided you must withhold at 45% on total payments made. If using formulas, the value of 'a' is 0.45.

Example 2: Using the formula

A foreign resident employee is working in Australia under a work and holiday makers visa (subclass 462) and has earnings for the month of $2,825.75.

The employee has provided their TFN on a Tax file number declaration, and total payments you have made to this employee for the income year do not exceed $37,000.

x = 2,825 (ignoring cents)

Withholding amount ( y )

= ( a x x )
= 0.15 x 2825
= 423.75 or $424.00 (rounded to nearest dollar)

Example 3: When payments exceed $37,000

A foreign resident employee is working in Australia under a working holiday makers visa (subclass 417) and has earnings for the month of May 2019 of $3,570.20.

The employee has provided their TFN on a Tax file number declaration and the total payments you have made to this employee from January 2019 to April 2019, in the 2018-19 income year, is $38,500. Last month's payment resulted in total payments exceeding $37,000. Therefore, from the next pay you must withhold at the foreign resident tax rates specified in Table A.

Withholding is calculated at 32.5c for every dollar of earnings over $37,000 (to $90,000)

Current pay = $3,570.20

The value of ' a ' in the formula is 0.325.

Withholding = 0.325 x 3,570
= 1,160.25 or $1,160.00 (rounded to the nearest dollar)

Rounding of withholding amounts

The withholding amounts calculated as a result of applying the above rates and formula are rounded to the nearest dollar. Values ending in 50 cents and higher are rounded to the next higher dollar. Do this rounding directly - that is, do not make a preliminary rounding to the nearest cent.

Where withholding is calculated on the top marginal rate of tax or when no TFN is provided, ignore cents in the withholding result.

Accounting software

Software written in accordance with the formulas in this schedule should be tested for accuracy against the Withholding look-up tool. The results obtained when using the coefficients in this schedule may differ slightly from the Withholding look-up tool. The differences result from the rounding of components.

TFN declarations

Your employee may indicate that they are a working holiday maker in their TFN declaration.

Even if they don't, you will need to withhold amounts using the rates shown in Table A (provided they have given you a valid TFN).

This applies to:

a.

Working holiday makers visa (subclass 417), or

b.

Work and holiday makers visa (subclass 462), or

c.

Bridging visa permitting the individual to work in Australia if:

i.

the bridging visa was granted under the Migration Act 1958 in relation to an application for a visa of a kind described in paragraph (a) or (b); and

ii.

the Minister administering that Act is still to make a decision in relation to the application; and

iii.

the most recent visa, other than a bridging visa, granted under that Act to the individual was a visa of a kind described in paragraph (a) or (b).

To confirm the visa status of a working holiday maker, go to the Department of Immigration and Border Protection's Visa Entitlement Verification Online (VEVO) webpage. This is where you can check visa details and conditions.

Working holiday makers cannot claim tax offsets. If they have claimed a tax offset on the Tax file number declaration, do not adjust the amount you withhold.

Working holiday makers cannot have a Higher Education Loan Program (HELP), Student Start-up Loan (SSL), Trade Support Loan (TSL) or Financial Supplement debt.

Working holiday makers cannot receive Community Development Employment Projects (CDEP) payments or Lump sum A, B or D payments.

If a TFN has not been provided

You must withhold 45% from payments to a working holiday maker (ignoring cents), if:

•

they have not quoted their TFN

•

they have not claimed an exemption from quoting their TFN

•

they have not advised you that they have applied for a TFN or have made an enquiry with us.

If an employee states at Question 1 of the Tax file number declaration that they have lodged a Tax file number - application or enquiry for individuals with us, they have 28 days to provide you with their TFN.

If the employee has not given you their TFN within 28 days, you must withhold 45% from any payment you make unless we tell you not to.