MANUFACTURERS, PRODUCERS AND DEALERS
Part III substituted for Parts III and IV by No 115 of 2000, s 3 and Sch 1 item 26, effective 7 September 2000. Part III formerly read:
PRODUCERS AND DEALERS
PRODUCERS TO BE REGISTERED
No person shall produce proclaimed material unless he or she is registered as a producer.
HOW REGISTRATION EFFECTED
Registration of producers shall be effected as follows:
The producer shall send to the Collector a request for registration as a producer in the form in Schedule II.
The Collector shall register the producer's name and the place where he or she produces proclaimed material in a book, and shall furnish to the producer a certificate of registration in the form of Schedule III.
DEALERS TO BE REGISTERED
No person shall deal in proclaimed material unless he or she is registered as a dealer, but this shall not apply to producers who deal only in proclaimed material of their own production.
MODE OF REGISTRATION OF DEALERS
Registration of dealers shall be effected as follows:
The dealer shall send to the Collector a request for registration in the form in Schedule IV.
The Collector shall register the name and place of business of the dealer in a book, and shall furnish to the dealer a certificate of registration in the form in Schedule V.
STORAGE OF PROCLAIMED MATERIAL
Except by permission no producer or dealer shall keep or store proclaimed material at any place other than the premises in respect of which he or she is registered.
No producer shall produce proclaimed material except at the premises in respect of which he or she is registered and no dealer shall carry on business as a dealer except at the premises in respect of which he or she is registered.
REGISTRATION OF SEPARATE PREMISES
Any producer or dealer may be severally registered in respect of any number of separate and distinct premises.
NOTICE OF CEASING TO PRODUCE OR DEAL IN PROCLAIMED MATERIAL
When a producer ceases to produce proclaimed material or a dealer ceases to deal in proclaimed material, he or she shall forthwith give notice in writing to the Collecor that he or she has so ceased.
Upon receipt of notice given under subsection (1) and upon being satisfied that the person giving the notice has no proclaimed material in his or her possession, custody or control, the Collector shall cancel the registration of that person as a producer or dealer, as the case may be.
ACCOUNTS AND RETURNS
A person who is a producer or dealer or, having been a producer or dealer, has ceased to be a producer or dealer shall, with respect to proclaimed material produced or dealt in, or produced and dealt in, by him or her, keep accounts and furnish returns in accordance with the regulation.
Part IV formerly read:
LICENSING OF MANUFACTURERS
GRANTING OF LICENCES
Licences to manufacture may be granted by the Collector, and may licence to manufacture without limitation or subject to any specified limitation.
MANUFACTURERS TO BE LICENSED
Subject to the regulations, a person shall not manufacture excisable goods except pursuant to this Act and a licence granted thereunder.
APPLICATION FOR LICENCE
Applications for licences may be made to the Collector and shall be in the form and accompanied by the particulars prescribed.
Until otherwise prescribed the application for a licence shall be in accordance with Schedule VI.
The applicant shall furnish the Collector with the prescribed drawings and particulars.
PAYMENT OF LICENCE FEE AND SECURITY
The applicant for a licence shall:
Pay to the Collector the licence fee as prescribed.
Give security to the Collector for compliance with this Act.
The sum in which security is to be given by the applicant for a licence shall be in accordance with the prescribed scale.
COLLECTOR TO GRANT LICENCE
The Collector if satisfied with the security given may grant to the applicant a licence in the form in Schedule VII, but if the application is refused the licence fee shalll be returned to the applicant.
The annual fees for licences shall be as prescribed.
CURRENCY OF LICENCES
A licence shall, unless previously cancelled, remain in force until 31 December next after the granting or renewal of the licence.
A licence may be renewed by the Collector upon an application for renewal made before the date of expiry of the licence and upon payment of the annual licence fee.
The Collector may, in exceptional circumstances, extend for a period not exceeding 7 days the time within which an application for the renewal of a licence and payment of the annual licence fee may be made.
The liability of the subscribers to the security given in respect of the original licence shall, in the absence of any notice of termination on the part of the subscribers, remain in full force for any period for which the licence is renewed.
TRANSFER OR CANCELLATION
Licences may be transferred with the written permission of the CEO on security being given by the transferee, and may be cancelled by the CEO by Gazette notice if the holder is convicted of any offence against this Act.
FRESH SECURITY MAY BE REQUIRED
The Collector may at any time require any manufacturer to give fresh security, and fresh security shall be given accordingly and in default the licence may be cancelled by the CEO by Gazette notice.
EXCISABLE GOODS TO BE MADE IN LICENSED FACTORIES
No manufacturer shall manufacture excisable goods at any place other than the factory specified in his or her licence, or shall manufacture in his or her factory excisable goods to a greater quantity than allowed by his or her licence or except by permission sell by retail any excisable goods in his or her factory or at any place within 45 metres thereof.
LICENSED MANUFACTURERS TO MANUFACTURE ONLY AT LICENSED PREMISES
Div 1 inserted by No 115 of 2000, s 3 and Sch 1 item 26, effective 7 September 2000.
A licensed manufacturer must not intentionally manufacture excisable goods at premises that are not specified in the manufacturer licence knowing, or being reckless as to whether, the goods are excisable goods and:
knowing the premises are not specified in the manufacturer licence; or
being reckless as to whether the premises are specified in the manufacturer licence.
Penalty: 2 years imprisonment or the greater of:
(a) 500 penalty units; and
(b) 5 times the amount of duty that would be payable if the goods had been entered for home consumption on the penalty day.
Note: See section
Crimes Act 1914
for the current value of a penalty unit.
A licensed manufacturer must not manufacture excisable goods at premises that are not specified in the manufacturer licence.
Penalty: 100 penalty units.
Strict liability applies to subsection (2).
S 27 substituted by No 115 of 2000, s 3 and Sch 1 item 26, effective 7 September 2000. For former wording of s 27 see note under Part III heading.