• Legal database
Legal database

Customs Tariff Act 1995

SCHEDULES

SCHEDULE 3  

View history reference

Note 1: See sections 15 and 16 .

Note 2: The text in this Schedule is based on the wording in the Harmonized Commodity Description and Coding System that is referred to in the International Convention on the Harmonized Commodity Description and Coding System done at Brussels on 14 June 1983.

Note 3: The text of the Convention is set out in Australian Treaty Series 1988 No 30. In 2006, the text of a Convention in the Australian Treaty Series was accessible through the Australian Treaties Library on the AustLII website (www.austlii.edu.au).

CLASSIFICATION OF GOODS AND GENERAL AND SPECIAL RATES OF DUTY

SECTION XV  

Base metals and articles of base metal
Notes.
  • 1. - This Section does not cover:
  • (a) Prepared paints, inks or other products with a basis of metallic flakes or powder (3207 to 3210.00.00, 3212, 3213 or 3215);
  • (b) Ferro-cerium or other pyrophoric alloys (3606);
  • (c) Headgear or parts thereof of 6506 or 6507.00.00;
  • (d) Umbrella frames or other articles of 6603;
  • (e) Goods of Chapter 71 (for example, precious metal alloys, base metal clad with precious metal, imitation jewellery);
  • (f) Articles of Section XVI (machinery, mechanical appliances and electrical goods);
  • (g) Assembled railway or tramway track (8608.00.00) or other articles of Section XVII (vehicles, ships and boats, aircraft);
  • (h) Instruments or apparatus of Section XVIII, including clock or watch springs;
  • (ij) Lead shot prepared for ammunition (9306) or other articles of Section XIX (arms and ammunition);
  • (k) Articles of Chapter 94 (for example, furniture, mattress supports, luminaires and lighting fittings, illuminated signs, prefabricated buildings);
  • (l) Articles of Chapter 95 (for example, toys, games, sports requisites);
  • (m) Hand sieves, buttons, pens, pencil-holders, pen nibs, monopods, bipods, tripods and similar articles or other articles of Chapter 96 (miscellaneous manufactured articles); or
  • (n) Articles of Chapter 97 (for example, works of art).
  • 2. - Throughout this Schedule, " parts of general use " means:
  • (a) Articles of 7307, 7312, 7315, 7317 or 7318 and similar articles of other base metal, other than articles specially designed for use exclusively in implants in medical, surgical, dental or veterinary sciences (9021);
  • (b) Springs and leaves for springs, of base metal, other than clock or watch springs (9114); and
  • (c) Articles of 8301, 8302, 8308, 8310.00.00 and frames and mirrors, of base metal, of 8306.
    •  
    In Chapters 73 to 76 and 78 to 82 (but not in 7315) references to parts of goods do not include references to parts of general use as defined above.
     
    Subject to the preceding paragraph and to Note 1 to Chapter 83, the articles of Chapter 82 or 83 are excluded from Chapters 72 to 76 and 78 to 81.
  • 3. - Throughout this Schedule, " base metals " means: iron and steel, copper, nickel, aluminium, lead, zinc, tin, tungsten (wolfram), molybdenum, tantalum, magnesium, cobalt, bismuth, cadmium, titanium, zirconium, antimony, manganese, beryllium, chromium, germanium, vanadium, gallium, hafnium, indium, niobium (columbium), rhenium and thallium.
  • 4. - Throughout this Schedule, " cermets " means products containing a microscopic heterogeneous combination of a metallic component and a ceramic component. " Cermets " includes sintered metal carbides (metal carbides sintered with a metal).
  • 5. - Classification of alloys (other than ferro-alloys and master alloys as defined in Chapters 72 and 74):
  • (a) An alloy of base metals is to be classified as an alloy of the metal which predominates by weight over each of the other metals;
  • (b) An alloy composed of base metals of this Section and of elements not falling within this Section is to be treated as an alloy of base metals of this Section if the total weight of such metals equals or exceeds the total weight of the other elements present;
  • (c) In this Section " alloys " includes sintered mixtures of metal powders, heterogeneous intimate mixtures obtained by melting (other than cermets) and intermetallic compounds.
  • 6. - Unless the context otherwise requires, any reference in this Schedule to a base metal includes a reference to alloys which, by virtue of Note 5 above, are to be classified as alloys of that metal.
  • 7. - Classification of composite articles:
     
    Except where the headings otherwise require, articles of base metal (including articles of mixed materials treated as articles of base metal under the Interpretation Rules) containing two or more base metals are to be treated as articles of the base metal predominating by weight over each of the other metals. For this purpose:
  • (a) Iron and steel, or different kinds of iron or steel, are regarded as one and the same metal;
  • (b) An alloy is regarded as being entirely composed of that metal as an alloy of which, by virtue of Note 5, it is classified; and
  • (c) A cermet of 8113.00.00 is regarded as a single base metal.
  • 8. - In this Section, the following have the meanings hereby assigned to them:
  • (a) Waste and scrap
  • (i) All metal waste and scrap; and
  • (ii) Metal goods definitely not usable as such because of breakage, cutting-up, wear or other reasons.
  • (b) Powders
     
    Products of which 90% or more by weight passes through a sieve having a mesh aperture of 1 mm.
  • 9.- For the purposes of Chapters 74 to 76 and 78 to 81, the following expressions have the meanings hereby assigned to them:
  • (a) Bars and rods
     
    Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including " flattened circles " and " modified rectangles " , of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including " modified rectangular " ) cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
     
    Wire-bars and billets of Chapter 74 with their ends tapered or otherwise worked simply to facilitate their entry into machines for converting them into, for example, drawing stock (wire-rod) or tubes, are however to be taken to be unwrought copper of 7403. This provision applies mutatis mutandis to the products of Chapter 81.
  • (b) Profiles
     
    Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
  • (c) Wire
     
    Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including " flattened circles " and " modified rectangles " , of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including " modified rectangular " ) cross-section exceeds one-tenth of the width.
  • (d) Plates, sheets, strip and foil
     
    Flat-surfaced products (other than the unwrought products), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including " modified rectangles " of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:
  • (i) of rectangular (including square) shape with a thickness not exceeding one-tenth of the width; or
  • (ii) of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.
    •  
    Headings for plates, sheets, strip, and foil apply, inter alia , to plates, sheets, strip, and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.
  • (e) Tubes and pipes
     
    Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.
    •
     View history note
    72 CHAPTER 72
    Iron and steel
    Notes.
  • 1. - In this Chapter and, in the case of Notes (d), (e) and (f) throughout this Schedule, the following have the meanings hereby assigned to them:
  • (a) Pig iron
     
    Iron-carbon alloys not usefully malleable, containing more than 2% by weight of carbon and which may contain by weight one or more other elements within the following limits:
  • - not more than 10% of chromium
  • - not more than 6% of manganese
  • - not more than 3% of phosphorus
  • - not more than 8% of silicon
  • - a total of not more than 10% of other elements.
  • (b) Spiegeleisen
     
    Iron-carbon alloys containing by weight more than 6% but not more than 30% of manganese and otherwise conforming to the specification at (a) above.
  • (c) Ferro-alloys
     
    Alloys in pigs, blocks, lumps or similar primary forms, in forms obtained by continuous casting and also in granular or powder forms, whether or not agglomerated, commonly used as an additive in the manufacture of other alloys or as de-oxidants, de-sulphurising agents or for similar uses in ferrous metallurgy and generally not usefully malleable, containing by weight 4% or more of the element iron and one or more of the following:
  • - more than 10% of chromium
  • - more than 30% of manganese
  • - more than 3% of phosphorus
  • - more than 8% of silicon
  • - a total of more than 10% of other elements, excluding carbon, subject to a maximum content of 10% in the case of copper.
  • (d) Steel
     
    Ferrous materials other than those of 7203 which (with the exception of certain types produced in the form of castings) are usefully malleable and which contain by weight 2% or less of carbon. However, chromium steels may contain higher proportions of carbon.
  • (e) Stainless steel
     
    Alloy steels containing, by weight, 1.2% or less of carbon and 10.5% or more of chromium, with or without other elements.
  • (f) Other alloy steel
     
    Steels not complying with the definition of stainless steel and containing by weight one or more of the following elements in the proportion shown:
  • - 0.3% or more of aluminium
  • - 0.0008% or more of boron
  • - 0.3% or more of chromium
  • - 0.3% or more of cobalt
  • - 0.4% or more of copper
  • - 0.4% or more of lead
  • - 1.65% or more of manganese
  • - 0.08% or more of molybdenum
  • - 0.3% or more of nickel
  • - 0.06% or more of niobium
  • - 0.6% or more of silicon
  • - 0.05% or more of titanium
  • - 0.3% or more of tungsten (wolfram)
  • - 0.1% or more of vanadium
  • - 0.05% or more of zirconium
  • - 0.1% or more of other elements (except sulphur, phosphorus, carbon and nitrogen), taken separately.
  • (g) Remelting scrap ingots of iron or steel
     
    Products roughly cast in the form of ingots without feeder-heads or hot tops, or of pigs, having obvious surface faults and not complying with the chemical composition of pig iron, spiegeleisen or ferro-alloys.
  • (h) Granules
     
    Products of which less than 90% by weight passes through a sieve with a mesh aperture of 1 mm and of which 90% or more by weight passes through a sieve with a mesh aperture of 5 mm.
  • (ij) Semi-finished products
     
    Continuous cast products of solid section, whether or not subjected to primary hot-rolling; and
     
    Other products of solid section, which have not been further worked than subjected to primary hot-rolling or roughly shaped by forging, including blanks for angles, shapes or sections.
     
    These products are not presented in coils.
  • (k) Flat-rolled products
     
    Rolled products of solid rectangular (other than square) cross-section, which do not conform to the definition at (ij) above in the form of:
  • - coils of successively superimposed layers, or
  • - straight lengths, which if of a thickness less than 4.75 mm are of a width measuring at least ten times the thickness or if of a thickness of 4.75 mm or more are of a width which exceeds 150 mm and measures at least twice the thickness.
    •  
    Flat-rolled products include those with patterns in relief derived directly from rolling (for example, grooves, ribs, chequers, tears, buttons, lozenges) and those which have been perforated, corrugated or polished, provided that they do not thereby assume the character of articles or products of other headings.
     
    Flat-rolled products of a shape other than rectangular or square, of any size, are to be classified as products of a width of 600 mm or more, provided that they do not assume the character of articles or products of other headings.
  • (l) Bars and rods, hot-rolled, in irregularly wound coils
     
    Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circles, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons (including " flattened circles " and " modified rectangles " , of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).
  • (m) Other bars and rods
     
    Products which do not conform to any of the definitions at (ij), (k) or (l) above or to the definition of wire, which have a uniform solid cross-section along their whole length in the shape of circles, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons (including " flattened circles " and " modified rectangles " , of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). These products may:
  • - have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods);
  • - be twisted after rolling.
  • (n) Angles, shapes and sections
     
    Products having a uniform solid cross-section along their whole length which do not conform to any of the definitions at (ij), (k), (l) or (m) above or to the definition of wire.
     
    Chapter 72 does not include products of 7301 or 7302.
  • (o) Wire
     
    Cold-formed products in coils, of any uniform solid cross-section along their whole length, which do not conform to the definition of flat-rolled products.
  • (p) Hollow drill bars and rods
     
    Hollow bars and rods of any cross-section, suitable for drills, of which the greatest external dimension of the cross-section exceeds 15 mm but does not exceed 52 mm, and of which the greatest internal dimension does not exceed one half of the greatest external dimension. Hollow bars and rods of iron or steel not conforming to this definition are to be classified in 7304.
  • 2. - Ferrous metals clad with another ferrous metal are to be classified as products of the ferrous metal predominating by weight.
  • 3. - Iron or steel products obtained by electrolytic deposition, by pressure casting or by sintering are to be classified, according to their form, their composition and their appearance, in the headings of this Chapter appropriate to similar hot-rolled products.
    • Subheading Notes.
  • 1. - In this Chapter the following have the meanings hereby assigned to them:
  • (a) Alloy pig iron
     
    Pig iron containing, by weight, one or more of the following elements in the specified proportions:
  • - more than 0.2% of chromium
  • - more than 0.3% of copper
  • - more than 0.3% of nickel
  • - more than 0.1% of any of the following elements: aluminium, molybdenum, titanium, tungsten (wolfram), vanadium.
  • (b) Non-alloy free-cutting steel
     
    Non-alloy steel containing, by weight, one or more of the following elements in the specified proportions:
  • - 0.08% or more of sulphur
  • - 0.1% or more of lead
  • - more than 0.05% of selenium
  • - more than 0.01% of tellurium
  • - more than 0.05% of bismuth.
  • (c) Silicon-electrical steel
     
    Alloy steels containing by weight at least 0.6% but not more than 6% of silicon and not more than 0.08% of carbon. They may also contain by weight not more than 1% of aluminium but no other element in a proportion that would give the steel the characteristics of another alloy steel.
  • (d) High speed steel
     
    Alloy steels containing, with or without other elements, at least two of the three elements molybdenum, tungsten and vanadium with a combined content by weight of 7% or more, 0.6% or more of carbon and 3 to 6% of chromium.
  • (e) Silico-manganese steel
     
    Alloy steels containing by weight:
  • - not more than 0.7% of carbon,
  • - 0.5% or more but not more than 1.9% of manganese, and
  • - 0.6% or more but not more than 2.3% of silicon, but no other element in a proportion that would give the steel the characteristics of another alloy steel.
  • 2. - For the classification of ferro-alloys in the subheadings of 7202 the following should be observed:
     
    A ferro-alloy is considered as binary and classified under the relevant subheading (if it exists) if only one of the alloy elements exceeds the minimum percentage laid down in Chapter Note 1(c); by analogy, it is considered respectively as ternary or quarternary if two or three alloy elements exceed the minimum percentage.
     
    For the application of this Note the unspecified " other elements " referred to in Chapter Note 1(c) must each exceed 10% by weight.
    •  Additional Note.
  • 1. - Throughout this Schedule " high alloy steel " means alloy steels containing by weight one or more of the following elements in the proportion shown:
  • - 2% or more of manganese
  • - 2% or more of silicon
  • - 0.5% or more of nickel
  • - 1% or more of chromium
  • - 0.1% or more of molybdenum
  • - 0.1% or more of vanadium
  • - 0.3% or more of tungsten
  • - 0.3% or more of cobalt
  • - 0.8% or more of copper
  • - 0.1% or more of any other alloy element not being lead, phosphorus, sulphur, aluminium or carbon.

    • SUB-CHAPTER I

    PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM


    7201 PIG IRON AND SPIEGELEISEN IN PIGS, BLOCKS OR OTHER PRIMARY FORMS:  
    7201.10.00 -Non-alloy pig iron containing by weight 0.5% or less of phosphorus 5%
    DCS:Free
    7201.20.00 -Non-alloy pig iron containing by weight more than 0.5% of phosphorus 5%
    DCS:Free
    7201.50.00 -Alloy pig iron; spiegeleisen Free
    7202 FERRO-ALLOYS:  
    7202.1 -Ferro-manganese:  
    7202.11.00 --Containing by weight more than 2% of carbon Free
    7202.19.00 --Other Free
    7202.2 -Ferro-silicon:  
    7202.21.00 --Containing by weight more than 55% of silicon Free
    7202.29.00 --Other Free
    7202.30.00 -Ferro-silico-manganese Free
    7202.4 -Ferro-chromium:  
    7202.41.00 --Containing by weight more than 4% of carbon Free
    7202.49.00 --Other Free
    7202.50.00 -Ferro-silico-chromium Free
    7202.60.00 -Ferro-nickel Free
    7202.70.00 -Ferro-molybdenum Free
    7202.80.00 -Ferro-tungsten and ferro-silico-tungsten Free
    7202.9 -Other:  
    7202.91.00 --Ferro-titanium and ferro-silico-titanium Free
    7202.92.00 --Ferro-vanadium Free
    7202.93.00 --Ferro-niobium Free
    7202.99.00 --Other Free
    7203 FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE AND OTHER SPONGY FERROUS PRODUCTS, IN LUMPS, PELLETS OR SIMILAR FORMS; IRON HAVING A MINIMUM PURITY BY WEIGHT OF 99.94%, IN LUMPS, PELLETS OR SIMILAR FORMS:  
    7203.10.00 -Ferrous products obtained by direct reduction of iron ore Free
    7203.90.00 -Other Free
    7204 FERROUS WASTE AND SCRAP; REMELTING SCRAP INGOTS OF IRON OR STEEL:  
    7204.10.00 -Waste and scrap of cast iron Free
    7204.2 -Waste and scrap of alloy steel:  
    7204.21.00 --Of stainless steel Free
    7204.29.00 --Other Free
    7204.30.00 -Waste and scrap of tinned iron or steel Free
    7204.4 -Other waste and scrap:  
    7204.41.00 --Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles Free
    7204.49.00 --Other Free
    7204.50.00 -Remelting scrap ingots 5%
    DCS:4%
    DCT:5%
    7205 GRANULES AND POWDERS, OF PIG IRON, SPIEGELEISEN, IRON OR STEEL:  
    7205.10.00 -Granules Free
    7205.2 -Powders:  
    7205.21.00 --Of alloy steel Free
    7205.29.00 --Other Free

    SUB-CHAPTER II

    IRON AND NON-ALLOY STEEL


    7206 IRON AND NON-ALLOY STEEL IN INGOTS OR OTHER PRIMARY FORMS (EXCLUDING IRON OF 7203):  
    7206.10.00 -Ingots Free
    7206.90.00 -Other 5%
    DCS:Free
    7207 SEMI-FINISHED PRODUCTS OF IRON OR NON-ALLOY STEEL:  
    7207.1 -Containing by weight less than 0.25% of carbon:  
    7207.11.00 --Of rectangular (including square) cross-section, the width measuring less than twice the thickness 5%
    DCS:Free
    7207.12.00 --Other, of rectangular (other than square) cross-section 5%
    DCS:Free
    7207.19.00 --Other 5%
    DCS:Free
    7207.20.00 -Containing by weight 0.25% or more of carbon 5%
    DCS:Free
    7208 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 mm OR MORE, HOT-ROLLED, NOT CLAD, PLATED OR COATED:  
    7208.10.00 -In coils, not further worked than hot-rolled, with patterns in relief 5%
    DCS:Free
    7208.2 -Other, in coils, not further worked than hot-rolled, pickled:  
    7208.25.00 --Of a thickness of 4.75 mm or more 5%
    DCS:Free
    7208.26.00 --Of a thickness of 3 mm or more but less than 4.75 mm 5%
    DCS:Free
    7208.27.00 --Of a thickness of less than 3 mm 5%
    DCS:Free
    7208.3 -Other, in coils, not further worked than hot-rolled:  
    7208.36.00 --Of a thickness exceeding 10 mm 5%
    DCS:Free
    7208.37.00 --Of a thickness of 4.75 mm or more but not exceeding 10 mm 5%
    DCS:Free
    7208.38.00 --Of a thickness of 3 mm or more but less than 4.75 mm 5%
    DCS:Free
    7208.39.00 --Of a thickness of less than 3 mm 5%
    DCS:Free
    7208.40.00 -Not in coils, not further worked than hot-rolled, with patterns in relief 5%
    DCS:Free
    7208.5 -Other, not in coils, not further worked than hot-rolled:  
    7208.51.00 --Of a thickness exceeding 10 mm 5%
    DCS:Free
    7208.52.00 --Of a thickness of 4.75 mm or more but not exceeding 10 mm 5%
    DCS:Free
    7208.53.00 --Of a thickness of 3 mm or more but less than 4.75 mm 5%
    DCS:Free
    7208.54.00 --Of a thickness of less than 3 mm 5%
    DCS:Free
    7208.90.00 -Other 5%
    DCS:4%
    DCT:5%
    7209 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 mm OR MORE, COLD-ROLLED (COLD-REDUCED), NOT CLAD, PLATED OR COATED:  
    7209.1 -In coils, not further worked than cold-rolled (cold-reduced):  
    7209.15.00 --Of a thickness of 3 mm or more 5%
    DCS:Free
    DCT:5%
    7209.16.00 --Of a thickness exceeding 1 mm but less than 3 mm 5%
    DCS:Free
    DCT:5%
    7209.17.00 --Of a thickness of 0.5 mm or more but not exceeding 1 mm 5%
    DCS:Free
    DCT:5%
    7209.18.00 --Of a thickness of less than 0.5 mm 5%
    DCS:Free
    DCT:5%
    7209.2 -Not in coils, not further worked than cold-rolled (cold-reduced):  
    7209.25.00 --Of a thickness of 3 mm or more 5%
    DCS:Free
    DCT:5%
    7209.26.00 --Of a thickness exceeding 1 mm but less than 3 mm 5%
    DCS:Free
    DCT:5%
    7209.27.00 --Of a thickness of 0.5 mm or more but not exceeding 1 mm 5%
    DCS:Free
    DCT:5%
    7209.28.00 --Of a thickness of less than 0.5 mm 5%
    DCS:Free
    DCT:5%
    7209.90.00 -Other 5%
    DCS:Free
    DCT:5%
    7210 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 mm OR MORE, CLAD, PLATED OR COATED:  
    7210.1 -Plated or coated with tin:  
    7210.11.00 --Of a thickness of 0.5 mm or more Free
    7210.12.00 --Of a thickness of less than 0.5 mm Free
    7210.20.00 -Plated or coated with lead, including terne-plate Free
    7210.30.00 -Electrolytically plated or coated with zinc 5%
    DCS:Free
    DCT:5%
    7210.4 -Otherwise plated or coated with zinc:  
    7210.41.00 --Corrugated 5%
    DCS:Free
    DCT:5%
    7210.49.00 --Other 5%
    DCS:Free
    DCT:5%
    7210.50.00 -Plated or coated with chromium oxides or with chromium and chromium oxides 5%
    DCS:Free
    DCT:5%
    7210.6 -Plated or coated with aluminium:  
    7210.61.00 --Plated or coated with aluminium-zinc alloys 5%
    DCS:Free
    DCT:5%
    7210.69.00 --Other 5%
    DCS:Free
    DCT:5%
    7210.70.00 -Painted, varnished or coated with plastics 5%
    DCS:Free
    DCT:5%
    7210.90.00 -Other 5%
    DCS:Free
    DCT:5%
    7211 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF LESS THAN 600 mm, NOT CLAD, PLATED OR COATED:  
    7211.1 -Not further worked than hot-rolled:  
    7211.13.00 --Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief 5%
    DCS:Free
    7211.14.00 --Other, of a thickness of 4.75 mm or more 5%
    DCS:Free
    7211.19.00 --Other 5%
    DCS:Free
    7211.2 -Not further worked than cold-rolled (cold-reduced):  
    7211.23.00 --Containing by weight less than 0.25% of carbon 5%
    DCS:Free
    DCT:5%
    7211.29.00 --Other 5%
    DCS:Free
    DCT:5%
    7211.90.00 -Other 5%
    DCS:4%
    DCT:5%
    7212 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF LESS THAN 600 mm, CLAD, PLATED OR COATED:  
    7212.10.00 -Plated or coated with tin Free
    7212.20.00 -Electrolytically plated or coated with zinc 5%
    DCS:Free
    DCT:5%
    7212.30.00 -Otherwise plated or coated with zinc 5%
    DCS:Free
    DCT:5%
    7212.40.00 -Painted, varnished or coated with plastics 5%
    DCS:Free
    DCT:5%
    7212.50.00 -Otherwise plated or coated 5%
    DCS:Free
    DCT:5%
    7212.60.00 -Clad 5%
    DCS:Free
    DCT:5%
    7213 BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF IRON OR NON-ALLOY STEEL:  
    7213.10.00 -Containing indentations, ribs, grooves or other deformations produced during the rolling process 5%
    DCS:Free
    7213.20.00 -Other, of free-cutting steel 5%
    DCS:Free
    7213.9 -Other:  
    7213.91.00 --Of circular cross-section measuring less than 14 mm in diameter 5%
    DCS:Free
    7213.99.00 --Other 5%
    DCS:Free
    7214 OTHER BARS AND RODS OF IRON OR NON-ALLOY STEEL, NOT FURTHER WORKED THAN FORGED, HOT-ROLLED, HOT-DRAWN OR HOT-EXTRUDED, BUT INCLUDING THOSE TWISTED AFTER ROLLING:  
    7214.10.00 -Forged 5%
    DCS:Free
    7214.20.00 -Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling 5%
    DCS:Free
    7214.30.00 -Other, of free-cutting steel 5%
    DCS:Free
    7214.9 -Other:  
    7214.91.00 --Of rectangular (other than square) cross-section 5%
    DCS:Free
    7214.99.00 --Other 5%
    DCS:Free
    7215 OTHER BARS AND RODS OF IRON OR NON-ALLOY STEEL:  
    7215.10 -Of free-cutting steel, not further worked than cold-formed or cold-finished:  
    7215.10.10 --- " Flattened circles " and " modified rectangles " as defined in Note 1(m) to Chapter 72 5%
    DCS:Free
    7215.10.90 ---Other 5%
    DCS:4%
    DCT:5%
    7215.50 -Other, not further worked than cold-formed or cold-finished:  
    7215.50.10 --- " Flattened circles " and " modified rectangles " as defined in Note 1(m) to Chapter 72 5%
    DCS:Free
    7215.50.90 ---Other 5%
    DCS:4%
    DCT:5%
    7215.90.00 -Other 5%
    DCS:Free
    7216 ANGLES, SHAPES AND SECTIONS OF IRON OR NON-ALLOY STEEL:  
    7216.10.00 -U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm 5%
    DCS:Free
    7216.2 -L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm:  
    7216.21.00 --L sections 5%
    DCS:Free
    7216.22.00 --T sections 5%
    DCS:Free
    7216.3 -U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more:  
    7216.31.00 --U sections 5%
    DCS:Free
    7216.32.00 --I sections 5%
    DCS:Free
    7216.33.00 --H sections 5%
    DCS:Free
    7216.40.00 -L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more 5%
    DCS:Free
    7216.50.00 -Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded 5%
    DCS:Free
    7216.6 -Angles, shapes and sections, not further worked than cold-formed or cold-finished:  
    7216.61.00 --Obtained from flat-rolled products 5%
    DCS:Free
    7216.69.00 --Other 5%
    DCS:Free
    7216.9 -Other:  
    7216.91.00 --Cold-formed or cold-finished from flat-rolled products 5%
    DCS:Free
    7216.99.00 --Other 5%
    DCS:Free
    7217 WIRE OF IRON OR NON-ALLOY STEEL:  
    7217.10.00 -Not plated or coated, whether or not polished 5%
    DCS:4%
    DCT:5%
    7217.20.00 -Plated or coated with zinc 5%
    DCS:4%
    DCT:5%
    7217.30.00 -Plated or coated with other base metals 5%
    DCS:4%
    DCT:5%
    7217.90.00 -Other 5%
    DCS:4%
    DCT:5%

    SUB-CHAPTER III

    STAINLESS STEEL


    7218 STAINLESS STEEL IN INGOTS OR OTHER PRIMARY FORMS; SEMI-FINISHED PRODUCTS OF STAINLESS STEEL:  
    7218.10.00 -Ingots and other primary forms 5%
    DCS:4%
    DCT:5%
    7218.9 -Other:  
    7218.91.00 --Of rectangular (other than square) cross-section 5%
    DCS:4%
    DCT:5%
    7218.99.00 --Other 5%
    DCS:4%
    DCT:5%
    7219 FLAT-ROLLED PRODUCTS OF STAINLESS STEEL, OF A WIDTH OF 600 mm OR MORE:  
    7219.1 -Not further worked than hot-rolled, in coils:  
    7219.11.00 --Of a thickness exceeding 10 mm Free
    7219.12.00 --Of a thickness of 4.75 mm or more but not exceeding 10 mm 5%
    DCS:4%
    DCT:5%
    7219.13.00 --Of a thickness of 3 mm or more but less than 4.75 mm 5%
    DCS:4%
    DCT:5%
    7219.14.00 --Of a thickness of less than 3 mm Free
    7219.2 -Not further worked than hot-rolled, not in coils:  
    7219.21.00 --Of a thickness exceeding 10 mm 5%
    DCS:4%
    DCT:5%
    7219.22.00 --Of a thickness of 4.75 mm or more but not exceeding 10 mm 5%
    DCS:4%
    DCT:5%
    7219.23.00 --Of a thickness of 3 mm or more but less than 4.75 mm 5%
    DCS:4%
    DCT:5%
    7219.24.00 --Of a thickness of less than 3 mm 5%
    DCS:4%
    DCT:5%
    7219.3 -Not further worked than cold-rolled (cold-reduced):  
    7219.31.00 --Of a thickness of 4.75 mm or more 5%
    DCS:4%
    CA:Free
    DCT:5%
    7219.32.00 --Of a thickness of 3 mm or more but less than 4.75 mm 5%
    DCS:4%
    CA:Free
    DCT:5%
    7219.33.00 --Of a thickness exceeding 1 mm but less than 3 mm 5%
    DCS:4%
    CA:Free
    DCT:5%
    7219.34.00 --Of a thickness of 0.5 mm or more but not exceeding 1 mm 5%
    DCS:4%
    CA:Free
    DCT:5%
    7219.35.00 --Of a thickness of less than 0.5 mm 5%
    DCS:4%
    CA:Free
    DCT:5%
    7219.90.00 -Other 5%
    DCS:4%
    DCT:5%
    7220 FLAT-ROLLED PRODUCTS OF STAINLESS STEEL, OF A WIDTH OF LESS THAN 600 mm:  
    7220.1 -Not further worked than hot-rolled:  
    7220.11.00 --Of a thickness of 4.75 mm or more 5%
    DCS:4%
    DCT:5%
    7220.12.00 --Of a thickness of less than 4.75 mm 5%
    DCS:4%
    DCT:5%
    7220.20.00 -Not further worked than cold-rolled (cold-reduced) 5%
    DCS:4%
    CA:Free
    DCT:5%
    7220.90.00 -Other 5%
    DCS:4%
    DCT:5%
    7221.00.00 BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF STAINLESS STEEL 5%
    DCS:4%
    DCT:5%
    7222 OTHER BARS AND RODS OF STAINLESS STEEL; ANGLES, SHAPES AND SECTIONS OF STAINLESS STEEL:  
    7222.1 -Bars and rods, not further worked than hot-rolled, hot-drawn or extruded:  
    7222.11.00 --Of circular cross-section Free
    7222.19.00 --Other 5%
    DCS:4%
    DCT:5%
    7222.20.00 -Bars and rods, not further worked than cold-formed or cold-finished 5%
    DCS:4%
    DCT:5%
    7222.30.00 -Other bars and rods 5%
    DCS:4%
    DCT:5%
    7222.40.00 -Angles, shapes and sections 5%
    DCS:4%
    DCT:5%
    7223.00.00 WIRE OF STAINLESS STEEL 5%
    DCS:4%
    DCT:5%

    SUB-CHAPTER IV

    OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL


    7224 OTHER ALLOY STEEL IN INGOTS OR OTHER PRIMARY FORMS; SEMI-FINISHED PRODUCTS OF OTHER ALLOY STEEL:  
    7224.10.00 -Ingots and other primary forms 5%
    DCS:4%
    DCT:5%
    7224.90.00 -Other 5%
    DCS:4%
    DCT:5%
    7225 FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF 600 mm OR MORE:  
    7225.1 -Of silicon-electrical steel:  
    7225.11.00 --Grain-oriented 5%
    DCS:4%
    DCT:5%
    7225.19.00 --Other 5%
    DCS:4%
    DCT:5%
    7225.30.00 -Other, not further worked than hot-rolled, in coils 5%
    DCS:4%
    DCT:5%
    7225.40.00 -Other, not further worked than hot-rolled, not in coils 5%
    DCS:4%
    DCT:5%
    7225.50.00 -Other, not further worked than cold-rolled (cold-reduced) 5%
    DCS:4%
    DCT:5%
    7225.9 -Other:  
    7225.91.00 --Electrolytically plated or coated with zinc 5%
    DCS:4%
    DCT:5%
    7225.92.00 --Otherwise plated or coated with zinc 5%
    DCS:4%
    DCT:5%
    7225.99.00 --Other 5%
    DCS:4%
    DCT:5%
    7226 FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF LESS THAN 600 mm:  
    7226.1 -Of silicon-electrical steel:  
    7226.11.00 --Grain-oriented 5%
    DCS:4%
    DCT:5%
    7226.19.00 --Other 5%
    DCS:4%
    DCT:5%
    7226.20.00 -Of high speed steel 5%
    DCS:4%
    DCT:5%
    7226.9 -Other:  
    7226.91.00 --Not further worked than hot-rolled 5%
    DCS:4%
    DCT:5%
    7226.92.00 --Not further worked than cold-rolled (cold-reduced) 5%
    DCS:4%
    DCT:5%
    7226.99.00 --Other 5%
    DCS:4%
    DCT:5%
    7227 BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF OTHER ALLOY STEEL:  
    7227.10.00 -Of high speed steel Free
    7227.20 -Of silico-manganese steel:  
    7227.20.10 --- " Flattened circles " and " modified rectangles " as defined in Note 1(l) to Chapter 72 5%
    DCS:4%
    DCT:5%
    7227.20.20 ---Goods, NSA, as follows:
    (a) containing less than 0.35% of carbon;
    (b) containing more than 1.2% of manganese    		 5%
    DCS:Free
    7227.20.90 ---Other 5%
    DCS:4%
    DCT:5%
    7227.90 -Other:  
    7227.90.10 ---Goods, as follows:
    (a) of high alloy steel;
    (b) " flattened circles " and " modified rectangles " as defined in Note 1(l) to Chapter 72    		 5%
    DCS:4%
    DCT:5%
    7227.90.90 ---Other 5%
    DCS:Free
    7228 OTHER BARS AND RODS OF OTHER ALLOY STEEL; ANGLES, SHAPES AND SECTIONS, OF OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL:  
    7228.10.00 -Bars and rods, of high speed steel 5%
    DCS:4%
    DCT:5%
    7228.20 -Bars and rods, of silico-manganese steel:  
    7228.20.10 --- " Flattened circles " and " modified rectangles " as defined in Note 1(m) to Chapter 72 5%
    DCS:4%
    DCT:5%
    7228.20.2 ---Goods, NSA, as follows:
    (a) containing less than 0.35% of carbon;
    (b) containing more than 1.2% of manganese:     		 
    7228.20.21 ----Not further worked than cold-formed or cold-finished 5%
    DCS:4%
    DCT:5%
    7228.20.29 ----Other 5%
    DCS:Free
    7228.20.90 ---Other 5%
    DCS:4%
    DCT:5%
    7228.30 -Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded:  
    7228.30.10 ---Goods, as follows:
    (a) of high alloy steel;
    (b) " flattened circles " and " modified rectangles " as defined in Note 1(m) to Chapter 72    		 5%
    DCS:4%
    DCT:5%
    7228.30.90 ---Other 5%
    DCS:Free
    7228.40 -Other bars and rods, not further worked than forged:  
    7228.40.10 ---Goods, as follows:
    (a) of high alloy steel;
    (b) " flattened circles " and " modified rectangles " as defined in Note 1(m) to Chapter 72    		 5%
    DCS:4%
    DCT:5%
    7228.40.90 ---Other 5%
    DCS:Free
    7228.50.00 -Other bars and rods, not further worked than cold-formed or cold-finished 5%
    DCS:4%
    DCT:5%
    7228.60 -Other bars and rods:  
    7228.60.10 ---Goods, as follows:
    (a) of high alloy steel;
    (b) " flattened circles " and " modified rectangles " as defined in Note 1(m) to Chapter 72    		 5%
    DCS:4%
    DCT:5%
    7228.60.90 ---Other 5%
    DCS:Free
    7228.70.00 -Angles, shapes and sections 5%
    DCS:4%
    DCT:5%
    7228.80.00 -Hollow drill bars and rods 5%
    DCS:4%
    DCT:5%
    7229 WIRE OF OTHER ALLOY STEEL:  
    7229.20.00 -Of silico-manganese steel 5%
    DCS:4%
    DCT:5%
    7229.90 -Other:  
    7229.90.10 ---Of high speed steel Free
    7229.90.90 ---Other 5%
    DCS:4%
    DCT:5%

     View history note
    73 CHAPTER 73
    Articles of iron or steel
    Notes.
  • 1. - In this Chapter " cast iron " applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in Note 1(d) to Chapter 72.
  • 2. - In this Chapter " wire " means hot or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.
    • Additional Notes.
  • 1. - In 7313.00.00, " twisted hoop " includes barbed obstacle tape, which may be presented in coils and/or in diamond concertina pattern.
  • 2. - Heading 7308 does not include:
  • (a) plates, rods, angles, shapes, sections, tubes, pipes and the like, requiring further modification before use in structures, including, but not limited to, cutting, drilling and bending; or
  • (b) tubes, pipes and the like prepared for the conveyance of fluids (including water, oil and gas).


    • 7301 SHEET PILING OF IRON OR STEEL, WHETHER OR NOT DRILLED, PUNCHED OR MADE FROM ASSEMBLED ELEMENTS; WELDED ANGLES, SHAPES AND SECTIONS, OF IRON OR STEEL:  
    7301.10.00 -Sheet piling 5%
    DCS:Free
    7301.20.00 -Angles, shapes and sections 5%
    DCS:4%
    DCT:5%
    7302 RAILWAY OR TRAMWAY TRACK CONSTRUCTION MATERIAL OF IRON OR STEEL, THE FOLLOWING: RAILS, CHECK-RAILS AND RACK RAILS, SWITCH BLADES, CROSSING FROGS, POINT RODS AND OTHER CROSSING PIECES, SLEEPERS (CROSS-TIES), FISH-PLATES, CHAIRS, CHAIR WEDGES, SOLE PLATES (BASE PLATES), RAIL CLIPS, BEDPLATES, TIES AND OTHER MATERIAL SPECIALIZED FOR JOINTING OR FIXING RAILS:  
    7302.10.00 -Rails 5%
    DCS:Free
    7302.30.00 -Switch blades, crossing frogs, point rods and other crossing pieces 5%
    DCS:Free
    7302.40.00 -Fish-plates and sole plates 5%
    DCS:Free
    7302.90.00 -Other 5%
    DCS:Free
    7303.00.00 TUBES, PIPES AND HOLLOW PROFILES, OF CAST IRON 5%
    DCS:Free
    7304 TUBES, PIPES AND HOLLOW PROFILES, SEAMLESS, OF IRON (OTHER THAN CAST IRON) OR STEEL:  
    7304.1 -Line pipe of a kind used for oil or gas pipelines:  
    7304.11.00 --Of stainless steel 5%
    DCS:4%
    DCT:5%
    7304.19.00 --Other 5%
    DCS:4%
    DCT:5%
    7304.2 -Casing, tubing and drill pipe, of a kind used in drilling for oil or gas:  
    7304.22.00 --Drill pipe of stainless steel 5%
    DCS:4%
    DCT:5%
    7304.23.00 --Other drill pipe 5%
    DCS:4%
    DCT:5%
    7304.24.00 --Other, of stainless steel 5%
    DCS:4%
    DCT:5%
    7304.29.00 --Other 5%
    DCS:4%
    DCT:5%
    7304.3 -Other, of circular cross-section, of iron or non-alloy steel:  
    7304.31.00 --Cold-drawn or cold-rolled (cold-reduced) 5%
    DCS:4%
    DCT:5%
    7304.39.00 --Other 5%
    DCS:4%
    DCT:5%
    7304.4 -Other, of circular cross-section, of stainless steel:  
    7304.41.00 --Cold-drawn or cold-rolled (cold-reduced) 5%
    DCS:4%
    DCT:5%
    7304.49.00 --Other 5%
    DCS:4%
    DCT:5%
    7304.5 -Other, of circular cross-section, of other alloy steel:  
    7304.51.00 --Cold-drawn or cold-rolled (cold-reduced) 5%
    DCS:4%
    DCT:5%
    7304.59.00 --Other 5%
    DCS:4%
    DCT:5%
    7304.90.00 -Other 5%
    DCS:4%
    DCT:5%
    7305
    7305.1 -Line pipe of a kind used for oil or gas pipelines:  
    7305.11.00 --Longitudinally submerged arc welded 5%
    DCS:4%
    DCT:5%
    7305.12.00 --Other, longitudinally welded 5%
    DCS:4%
    DCT:5%
    7305.19.00 --Other 5%
    DCS:4%
    DCT:5%
    7305.20.00 -Casing of a kind used in drilling for oil or gas 5%
    DCS:4%
    DCT:5%
    7305.3 -Other, welded:  
    7305.31.00 --Longitudinally welded 5%
    DCS:4%
    DCT:5%
    7305.39.00 --Other 5%
    DCS:4%
    DCT:5%
    7305.90.00 -Other 5%
    DCS:4%
    DCT:5%
    7306 OTHER TUBES, PIPES AND HOLLOW PROFILES (FOR EXAMPLE, OPEN SEAM OR WELDED, RIVETED OR SIMILARLY CLOSED), OF IRON OR STEEL:  
    7306.1 -Line pipe of a kind used for oil or gas pipelines:  
    7306.11.00 --Welded, of stainless steel 5%
    DCS:4%
    DCT:5%
    7306.19.00 --Other 5%
    DCS:4%
    DCT:5%
    7306.2 -Casing and tubing of a kind used in drilling for oil or gas:  
    7306.21.00 --Welded, of stainless steel 5%
    DCS:4%
    DCT:5%
    7306.29.00 --Other 5%
    DCS:4%
    DCT:5%
    7306.30.00 -Other, welded, of circular cross-section, of iron or non-alloy steel 5%
    DCS:4%
    DCT:5%
    7306.40.00 -Other, welded, of circular cross-section, of stainless steel 5%
    DCS:4%
    DCT:5%
    7306.50.00 -Other, welded, of circular cross-section, of other alloy steel 5%
    DCS:4%
    DCT:5%
    7306.6 -Other, welded, of non-circular cross-section:  
    7306.61.00 --Of square or rectangular cross-section 5%
    DCS:4%
    DCT:5%
    7306.69.00 --Of other non-circular cross-section 5%
    DCS:4%
    DCT:5%
    7306.90.00 -Other 5%
    DCS:4%
    DCT:5%
    7307 TUBE OR PIPE FITTINGS (FOR EXAMPLE, COUPLINGS, ELBOWS, SLEEVES), OF IRON OR STEEL:  
    7307.1 -Cast fittings:  
    7307.11.00 --Of non-malleable cast iron 5%
    DCS:4%
    DCT:5%
    7307.19.00 --Other 5%
    DCS:4%
    DCT:5%
    7307.2 -Other, of stainless steel:  
    7307.21.00 --Flanges 5%
    DCS:4%
    DCT:5%
    7307.22.00 --Threaded elbows, bends and sleeves 5%
    DCS:4%
    DCT:5%
    7307.23.00 --Butt welding fittings 5%
    DCS:4%
    DCT:5%
    7307.29.00 --Other 5%
    DCS:4%
    DCT:5%
    7307.9 -Other:  
    7307.91.00 --Flanges 5%
    DCS:4%
    DCT:5%
    7307.92.00 --Threaded elbows, bends and sleeves 5%
    DCS:4%
    DCT:5%
    7307.93.00 --Butt welding fittings 5%
    DCS:4%
    DCT:5%
    7307.99.00 --Other 5%
    DCS:4%
    DCT:5%
    7308 STRUCTURES (EXCLUDING PREFABRICATED BUILDINGS OF 9406) AND PARTS OF STRUCTURES (FOR EXAMPLE, BRIDGES AND BRIDGE-SECTIONS, LOCK-GATES, TOWERS, LATTICE MASTS, ROOFS, ROOFING FRAMEWORKS, DOORS AND WINDOWS AND THEIR FRAMES AND THRESHOLDS FOR DOORS, SHUTTERS, BALUSTRADES, PILLARS AND COLUMNS), OF IRON OR STEEL; PLATES, RODS, ANGLES, SHAPES, SECTIONS, TUBES AND THE LIKE, PREPARED FOR USE IN STRUCTURES, OF IRON OR STEEL:  
    7308.10.00 -Bridges and bridge-sections 5%
    DCS:4%
    DCT:5%
    7308.20.00 -Towers and lattice masts 5%
    DCS:4%
    DCT:5%
    7308.30.00 -Doors, windows and their frames and thresholds for doors 5%
    DCS:4%
    DCT:5%
    7308.40.00 -Equipment for scaffolding, shuttering, propping or pit-propping 5%
    DCS:4%
    DCT:5%
    7308.90.00 -Other 5%
    DCS:4%
    DCT:5%
    7309.00.00 RESERVOIRS, TANKS, VATS AND SIMILAR CONTAINERS FOR ANY MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED GAS), OF IRON OR STEEL, OF A CAPACITY EXCEEDING 300 L, WHETHER OR NOT LINED OR HEAT-INSULATED, BUT NOT FITTED WITH MECHANICAL OR THERMAL EQUIPMENT 5%
    7310 TANKS, CASKS, DRUMS, CANS, BOXES AND SIMILAR CONTAINERS, FOR ANY MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED GAS), OF IRON OR STEEL, OF A CAPACITY NOT EXCEEDING 300 L, WHETHER OR NOT LINED OR HEAT-INSULATED, BUT NOT FITTED WITH MECHANICAL OR THERMAL EQUIPMENT:  
    7310.10.00 -Of a capacity of 50 L or more 5%
    DCS:4%
    DCT:5%
    7310.2 -Of a capacity of less than 50 L:  
    7310.21.00 --Cans which are to be closed by soldering or crimping 5%
    DCS:4%
    DCT:5%
    7310.29.00 --Other 5%
    DCS:4%
    DCT:5%
    7311.00.00 CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS, OF IRON OR STEEL 5%
    7312 STRANDED WIRE, ROPES, CABLES, PLAITED BANDS, SLINGS AND THE LIKE, OF IRON OR STEEL, NOT ELECTRICALLY INSULATED:  
    7312.10.00 -Stranded wire, ropes and cables 5%
    7312.90.00 -Other 5%
    7313.00.00 BARBED WIRE OF IRON OR STEEL; TWISTED HOOP OR SINGLE FLAT WIRE, BARBED OR NOT, AND LOOSELY TWISTED DOUBLE WIRE, OF A KIND USED FOR FENCING, OF IRON OR STEEL Free
    7314 CLOTH (INCLUDING ENDLESS BANDS), GRILL, NETTING AND FENCING, OF IRON OR STEEL WIRE; EXPANDED METAL OF IRON OR STEEL:  
    7314.1 -Woven cloth:  
    7314.12.00 --Endless bands for machinery, of stainless steel 5%
    7314.14.00 --Other woven cloth, of stainless steel 5%
    7314.19.00 --Other Free
    7314.20.00 -Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm 2 or more Free
    7314.3 -Other grill, netting and fencing, welded at the intersection:  
    7314.31.00 --Plated or coated with zinc Free
    7314.39.00 --Other Free
    7314.4 -Other cloth, grill, netting and fencing:  
    7314.41.00 --Plated or coated with zinc Free
    7314.42.00 --Coated with plastics Free
    7314.49.00 --Other Free
    7314.50.00 -Expanded metal 5%
    7315 CHAIN AND PARTS THEREOF, OF IRON OR STEEL:  
    7315.1 -Articulated link chain and parts thereof:  
    7315.11.00 --Roller chain 5%
    7315.12.00 --Other chain 5%
    7315.19.00 --Parts 5%
    7315.20.00 -Skid chain Free
    7315.8 -Other chain:  
    7315.81.00 --Stud-link Free
    7315.82.00 --Other, welded link 5%
    7315.89.00 --Other 5%
    7315.90.00 -Other parts 5%
    7316.00.00 ANCHORS, GRAPNELS AND PARTS THEREOF, OF IRON OR STEEL 5%
    7317 NAILS, TACKS, DRAWING PINS, CORRUGATED NAILS, STAPLES (OTHER THAN THOSE OF 8305) AND SIMILAR ARTICLES, OF IRON OR STEEL, WHETHER OR NOT WITH HEADS OF OTHER MATERIAL, BUT EXCLUDING SUCH ARTICLES WITH HEADS OF COPPER:  
    7317.00.10 ---Horse-shoe nails Free
    7317.00.90 ---Other 5%
    7318 SCREWS, BOLTS, NUTS, COACH SCREWS, SCREW HOOKS, RIVETS, COTTERS, COTTER-PINS, WASHERS (INCLUDING SPRING WASHERS) AND SIMILAR ARTICLES, OF IRON OR STEEL:  
    7318.1 -Threaded articles:  
    7318.11.00 --Coach screws 5%
    7318.12.00 --Other wood screws 5%
    7318.13.00 --Screw hooks and screw rings Free
    7318.14.00 --Self-tapping screws 5%
    7318.15.00 --Other screws and bolts, whether or not with their nuts or washers 5%
      From 1 January 2005 10%
    DC:5%
      From 1 January 2010 5%
    7318.16.00 --Nuts 5%
    7318.19.00 --Other 5%
    7318.2 -Non-threaded articles:  
    7318.21.00 --Spring washers and other lock washers 5%
    7318.22.00 --Other washers 5%
    7318.23.00 --Rivets 5%
    7318.24.00 --Cotters and cotter-pins 5%
    7318.29.00 --Other 5%
    7319 SEWING NEEDLES, KNITTING NEEDLES, BODKINS, CROCHET HOOKS, EMBROIDERY STILETTOS AND SIMILAR ARTICLES, FOR USE IN THE HAND, OF IRON OR STEEL; SAFETY PINS AND OTHER PINS OF IRON OR STEEL, NOT ELSEWHERE SPECIFIED OR INCLUDED:  
    7319.40.00 -Safety pins and other pins Free
    7319.90.00 -Other Free
    7320 SPRINGS AND LEAVES FOR SPRINGS, OF IRON OR STEEL:  
    7320.10.00 -Leaf-springs and leaves therefor 5%
      From 1 January 2005 10%
    DC:5%
      From 1 January 2010 5%
    7320.20.00 -Helical springs 5%
      From 1 January 2005 10%
    DC:5%
      From 1 January 2010 5%
    7320.90.00 -Other 5%
      From 1 January 2005 10%
    DC:5%
      From 1 January 2010 5%
    7321 STOVES, RANGES, GRATES, COOKERS (INCLUDING THOSE WITH SUBSIDIARY BOILERS FOR CENTRAL HEATING), BARBECUES, BRAZIERS, GAS-RINGS, PLATE WARMERS AND SIMILAR NON-ELECTRIC DOMESTIC APPLIANCES, AND PARTS THEREOF, OF IRON OR STEEL:  
    7321.1 -Cooking appliances and plate warmers:  
    7321.11.00 --For gas fuel or for both gas and other fuels 5%
    7321.12.00 --For liquid fuel 5%
    7321.19.00 --Other, including appliances for solid fuel 5%
    7321.8 -Other appliances:  
    7321.81.00 --For gas fuel or for both gas and other fuels 5%
    7321.82.00 --For liquid fuel 5%
    7321.89.00 --Other, including appliances for solid fuel 5%
    7321.90.00 -Parts 5%
    7322 RADIATORS FOR CENTRAL HEATING, NOT ELECTRICALLY HEATED, AND PARTS THEREOF, OF IRON OR STEEL; AIR HEATERS AND HOT AIR DISTRIBUTORS (INCLUDING DISTRIBUTORS WHICH CAN ALSO DISTRIBUTE FRESH OR CONDITIONED AIR), NOT ELECTRICALLY HEATED, INCORPORATING A MOTOR-DRIVEN FAN OR BLOWER, AND PARTS THEREOF, OF IRON OR STEEL:  
    7322.1 -Radiators and parts thereof:  
    7322.11.00 --Of cast iron 5%
      From 1 January 2005 10%
    DC:5%
      From 1 January 2010 5%
    7322.19.00 --Other 5%
    7322.90.00 -Other 5%
    7323 TABLE, KITCHEN OR OTHER HOUSEHOLD ARTICLES AND PARTS THEREOF, OF IRON OR STEEL; IRON OR STEEL WOOL; POT SCOURERS AND SCOURING OR POLISHING PADS, GLOVES AND THE LIKE, OF IRON OR STEEL:  
    7323.10.00 -Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like 5%
    7323.9 -Other:  
    7323.91.00 --Of cast iron, not enamelled Free
    7323.92.00 --Of cast iron, enamelled 5%
    7323.93.00 --Of stainless steel 5%
    CA:Free
    7323.94.00 --Of iron (other than cast iron) or steel, enamelled 5%
    7323.99.00 --Other 5%
    7324 SANITARY WARE AND PARTS THEREOF, OF IRON OR STEEL:  
    7324.10.00 -Sinks and wash basins, of stainless steel 5%
    7324.2 -Baths:  
    7324.21.00 --Of cast iron, whether or not enamelled 5%
    7324.29.00 --Other 5%
    7324.90.00 -Other, including parts 5%
    7325 OTHER CAST ARTICLES OF IRON OR STEEL:  
    7325.10.00 -Of non-malleable cast iron 5%
    7325.9 -Other:  
    7325.91.00 --Grinding balls and similar articles for mills 5%
    DCS:4%
    DCT:5%
    7325.99.00 --Other 5%
    7326 OTHER ARTICLES OF IRON OR STEEL:  
    7326.1 -Forged or stamped, but not further worked:  
    7326.11.00 --Grinding balls and similar articles for mills 5%
    DCS:4%
    DCT:5%
    7326.19.00 --Other 5%
      From 1 January 2005 10%
    DC:5%
      From 1 January 2010 5%
    7326.20.00 -Articles of iron or steel wire 5%
    7326.90 -Other:  
    7326.90.10 ---Of a kind used as components in passenger motor vehicles 5%
    CA:Free
      From 1 January 2005 10%
    DC:5%
    CA:Free
      From 1 January 2010 5%
    CA:Free
    7326.90.90 ---Other 5%
    CA:Free

     View history note
    74 CHAPTER 74
    Copper and articles thereof
    Note.
  • 1. - In this Chapter the following have the meanings hereby assigned to them:
  • (a) Refined copper
     
    Metal containing at least 99.85% by weight of copper; or Metal containing at least 97.5% by weight of copper, provided that the content by weight of any other element does not exceed the limit specified in the following table:


    • TABLE - Other elements
    TABLE - Other elements
    Element Limiting content % by weight
    Ag Silver 0.25
    As Arsenic 0.5
    Cd Cadmium 1.3
    Cr Chromium 1.4
    Mg Magnesium 0.8
    Pb Lead 1.5
    S Sulphur 0.7
    Sn Tin 0.8
    Te Tellurium 0.8
    Zn Zinc 1
    Zr Zirconium 0.3
    Other elements (1) , each 0.3

  •  
    (1) Other elements are, for example, Al, Be, Co, Fe, Mn, Ni, Si.
  • (b) Copper alloys
     
    Metallic substances other than unrefined copper in which copper predominates by weight over each of the other elements, provided that:
  • (i) the content by weight of at least one of the other elements is greater than the limit specified in the foregoing table; or
  • (ii) the total content by weight of such other elements exceeds 2.5%.
  • (c) Master alloys
     
    Alloys containing with other elements more than 10% by weight of copper, not usefully malleable and commonly used as an additive in the manufacture of other alloys or as de-oxidants, de-sulphurising agents or for similar uses in the metallurgy of non-ferrous metals. However, copper phosphide (phosphor copper) containing more than 15% by weight of phosphorus falls in 2853.
  • (d) - (h) (Repealed by No 91 of 2021)
    • Subheading Note.
  • 1. - In this Chapter the following have the meanings hereby assigned to them:
  • (a) Copper-zinc base alloys (brasses)
     
    Alloys of copper and zinc, with or without other elements. When other elements are present:
  • - zinc predominates by weight over each of such other elements;
  • - any nickel content by weight is less than 5% (see copper-nickel-zinc alloys (nickel silvers)); and
  • - any tin content by weight is less than 3% (see copper-tin alloys (bronzes)).
  • (b) Copper-tin base alloys (bronzes)
     
    Alloys of copper and tin, with or without other elements. When other elements are present, tin predominates by weight over each of such other elements, except that when the tin content is 3% or more the zinc content by weight may exceed that of tin but must be less than 10%.
  • (c) Copper-nickel-zinc base alloys (nickel silvers)
     
    Alloys of copper, nickel and zinc, with or without other elements. The nickel content is 5% or more by weight (see copper-zinc alloys (brasses)).
  • (d) Copper-nickel base alloys
     
    Alloys of copper and nickel, with or without other elements but in any case containing by weight not more than 1% of zinc. When other elements are present, nickel predominates by weight over each of such other elements.
    •


    7401.00.00 COPPER MATTES; CEMENT COPPER (PRECIPITATED COPPER) Free
    7402.00.00 UNREFINED COPPER; COPPER ANODES FOR ELECTROLYTIC REFINING Free
    7403 REFINED COPPER AND COPPER ALLOYS, UNWROUGHT:  
    7403.1 -Refined copper:  
    7403.11.00 --Cathodes and sections of cathodes Free
    7403.12.00 --Wire-bars Free
    7403.13.00 --Billets Free
    7403.19.00 --Other Free
    7403.2 -Copper alloys:  
    7403.21.00 --Copper-zinc base alloys (brass) Free
    7403.22.00 --Copper-tin base alloys (bronze) Free
    7403.29.00 --Other copper alloys (other than master alloys of 7405.00.00) Free
    7404.00.00 COPPER WASTE AND SCRAP Free
    7405.00.00 MASTER ALLOYS OF COPPER Free
    7406 COPPER POWDERS AND FLAKES:  
    7406.10.00 -Powders of non-lamellar structure Free
    7406.20.00 -Powders of lamellar structure; flakes Free
    7407 COPPER BARS, RODS AND PROFILES:  
    7407.10.00 -Of refined copper 5%
    DCS:4%
    DCT:5%
    7407.2 -Of copper alloys:  
    7407.21.00 --Of copper-zinc base alloys (brass) 5%
    DCS:4%
    DCT:5%
    7407.29.00 --Other 5%
    DCS:4%
    DCT:5%
    7408 COPPER WIRE:  
    7408.1 -Of refined copper:  
    7408.11.00 --Of which the maximum cross-sectional dimension exceeds 6 mm 5%
    DCS:4%
    DCT:5%
    7408.19.00 --Other 5%
    DCS:4%
    DCT:5%
    7408.2 -Of copper alloys:  
    7408.21.00 --Of copper-zinc base alloys (brass) 5%
    DCS:4%
    DCT:5%
    7408.22.00 --Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) 5%
    DCS:4%
    DCT:5%
    7408.29.00 --Other 5%
    DCS:4%
    DCT:5%
    7409 COPPER PLATES, SHEETS AND STRIP, OF A THICKNESS EXCEEDING 0.15 mm:  
    7409.1 -Of refined copper:  
    7409.11.00 --In coils 5%
    DCS:4%
    DCT:5%
    7409.19.00 --Other 5%
    DCS:4%
    DCT:5%
    7409.2 -Of copper-zinc base alloys (brass):  
    7409.21.00 --In coils 5%
    DCS:4%
    DCT:5%
    7409.29.00 --Other 5%
    DCS:4%
    DCT:5%
    7409.3 -Of copper-tin base alloys (bronze):  
    7409.31.00 --In coils 5%
    DCS:4%
    DCT:5%
    7409.39.00 --Other 5%
    DCS:4%
    DCT:5%
    7409.40.00 -Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) 5%
    DCS:4%
    DCT:5%
    7409.90.00 -Of other copper alloys 5%
    DCS:4%
    DCT:5%
    7410 COPPER FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKING MATERIALS), OF A THICKNESS (EXCLUDING ANY BACKING) NOT EXCEEDING 0.15 mm:  
    7410.1 -Not backed:  
    7410.11.00 --Of refined copper 5%
    DCS:4%
    DCT:5%
    7410.12.00 --Of copper alloys 5%
    DCS:4%
    DCT:5%
    7410.2 -Backed:  
    7410.21.00 --Of refined copper 5%
    DCS:4%
    DCT:5%
    7410.22.00 --Of copper alloys 5%
    DCS:4%
    DCT:5%
    7411 COPPER TUBES AND PIPES:  
    7411.10.00 -Of refined copper 5%
    DCS:4%
    DCT:5%
    7411.2 -Of copper alloys:  
    7411.21.00 --Of copper-zinc base alloys (brass) 5%
    DCS:4%
    DCT:5%
    7411.22.00 --Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) 5%
    DCS:4%
    DCT:5%
    7411.29.00 --Other 5%
    DCS:4%
    DCT:5%
    7412 COPPER TUBE OR PIPE FITTINGS (FOR EXAMPLE, COUPLINGS, ELBOWS, SLEEVES):  
    7412.10.00 -Of refined copper 5%
    7412.20.00 -Of copper alloys 5%
    7413.00.00 STRANDED WIRE, CABLES, PLAITED BANDS AND THE LIKE, OF COPPER, NOT ELECTRICALLY INSULATED 5%
    DCS:4%
    DCT:5%
    7415 NAILS, TACKS, DRAWING PINS, STAPLES (OTHER THAN THOSE OF 8305) AND SIMILAR ARTICLES, OF COPPER OR OF IRON OR STEEL WITH HEADS OF COPPER; SCREWS, BOLTS, NUTS, SCREW HOOKS, RIVETS, COTTERS, COTTER-PINS, WASHERS (INCLUDING SPRING WASHERS) AND SIMILAR ARTICLES, OF COPPER:  
    7415.10.00 -Nails and tacks, drawing pins, staples and similar articles 5%
    7415.2 -Other articles, not threaded:  
    7415.21.00 --Washers (including spring washers) 5%
    7415.29.00 --Other 5%
    7415.3 -Other threaded articles:  
    7415.33.00 --Screws; bolts and nuts 5%
    7415.39.00 --Other 5%
    7418 TABLE, KITCHEN OR OTHER HOUSEHOLD ARTICLES AND PARTS THEREOF, OF COPPER; POT SCOURERS AND SCOURING OR POLISHING PADS, GLOVES AND THE LIKE, OF COPPER; SANITARY WARE AND PARTS THEREOF, OF COPPER:  
    7418.10.00 -Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like 5%
    7418.20.00 -Sanitary ware and parts thereof 5%
    7419 OTHER ARTICLES OF COPPER:  
    7419.20 -Cast, moulded, stamped or forged, but not further worked:
    7419.20.10 ---Chain and parts thereof Free
    7419.20.90 ---Other 5%
    7419.80 -Other:  
    7419.80.10 ---Chain and parts thereof Free
    7419.80.90 ---Other 5%

     View history note
    75 CHAPTER 75
    Nickel and articles thereof
    Note.
  • (Repealed by No 91 of 2021)
    • Subheading Notes.
  • 1. - In this Chapter the following have the meanings hereby assigned to them:
  • (a) Nickel, not alloyed
     
    Metal containing by weight at least 99% of nickel plus cobalt, provided that:
  • (i) the cobalt content by weight does not exceed 1.5%, and
  • (ii) the content by weight of any other element does not exceed the limit specified in the following table:


    • TABLE - Other elements
    TABLE - Other elements
    Element Limiting content % by weight
    Fe Iron 0.5
    O Oxygen 0.4
    Other elements, each 0.3

  • (b) Nickel alloys
     
    Metallic substances in which nickel predominates by weight over each of the other elements provided that:
  • (i) the content by weight of cobalt exceeds 1.5%,
  • (ii) the content by weight of at least one of the other elements is greater than the limit specified in the foregoing table, or
  • (iii) the total content by weight of elements other than nickel plus cobalt exceeds 1%.
  • 2. - Notwithstanding the provisions of Note 9(c) to Section XV, for the purposes of 7508.10.00 " wire " applies only to products, whether or not in coils, of any cross-sectional shape, of which no cross-sectional dimension exceeds 6 mm.


    • 7501 NICKEL MATTES, NICKEL OXIDE SINTERS AND OTHER INTERMEDIATE PRODUCTS OF NICKEL METALLURGY:  
    7501.10.00 -Nickel mattes Free
    7501.20.00 -Nickel oxide sinters and other intermediate products of nickel metallurgy Free
    7502 UNWROUGHT NICKEL:  
    7502.10.00 -Nickel, not alloyed Free
    7502.20.00 -Nickel alloys Free
    7503.00.00 NICKEL WASTE AND SCRAP Free
    7504.00.00 NICKEL POWDERS AND FLAKES Free
    7505 NICKEL BARS, RODS, PROFILES AND WIRE:  
    7505.1 -Bars, rods and profiles:  
    7505.11.00 --Of nickel, not alloyed Free
    7505.12.00 --Of nickel alloys Free
    7505.2 -Wire:  
    7505.21.00 --Of nickel, not alloyed Free
    7505.22.00 --Of nickel alloys Free
    7506 NICKEL PLATES, SHEETS, STRIP AND FOIL:  
    7506.10.00 -Of nickel, not alloyed Free
    7506.20.00 -Of nickel alloys Free
    7507 NICKEL TUBES, PIPES AND TUBE OR PIPE FITTINGS (FOR EXAMPLE, COUPLINGS, ELBOWS, SLEEVES):  
    7507.1 -Tubes and pipes:  
    7507.11.00 --Of nickel, not alloyed Free
    7507.12.00 --Of nickel alloys Free
    7507.20.00 -Tube or pipe fittings 5%
    7508 OTHER ARTICLES OF NICKEL:  
    7508.10.00 -Cloth, grill and netting, of nickel wire Free
    7508.90.00 -Other Free

     View history note
    76 CHAPTER 76
    Aluminium and articles thereof
    Note.
  • (Repealed by No 91 of 2021)
    • Subheading Notes.
  • 1. - In this Chapter the following have the meanings hereby assigned to them:
  • (a) Aluminium, not alloyed
     
    Metal containing by weight at least 99% of aluminium, provided that the content by weight of any other element does not exceed the limit specified in the following table:


    • TABLE - Other elements
    TABLE - Other elements
    Element Limiting content % by weight
    Fe + Si (iron plus silicon) 1
    Other elements (1) , each 0.1 (2)

  •  
    (1) Other elements are, for example, Cr, Cu, Mg, Mn, Ni, Zn.
  •  
    (2) Copper is permitted in a proportion greater than 0.1% but not more than 0.2%, provided that neither the chromium nor manganese content exceeds 0.05%.
  • (b) Aluminium alloys
     
    Metallic substances in which aluminium predominates by weight over each of the other elements, provided that:
  • (i) the content by weight of at least one of the other elements or of iron plus silicon taken together is greater than the limit specified in the foregoing table; or
  • (ii) the total content by weight of such other elements exceeds 1%.
  • 2. - Notwithstanding the provisions of Note 9(c) to Section XV, for the purposes of 7616.91.00 " wire " applies only to products, whether or not in coils, of any cross-sectional shape, of which no cross-sectional dimension exceeds 6 mm.
    • Additional Note.
  • 1. - Heading 7610 does not include plates, rods, angles, shapes, sections, tubes, pipes and the like, requiring further modification before use in structures, including, but not limited to, cutting, drilling and bending.


    • 7601 UNWROUGHT ALUMINIUM:  
    7601.10.00 -Aluminium, not alloyed Free
    7601.20.00 -Aluminium alloys Free
    7602.00.00 ALUMINIUM WASTE AND SCRAP Free
    7603 ALUMINIUM POWDERS AND FLAKES:  
    7603.10.00 -Powders of non-lamellar structure Free
    7603.20.00 -Powders of lamellar structure; flakes Free
    7604 ALUMINIUM BARS, RODS AND PROFILES:  
    7604.10.00 -Of aluminium, not alloyed 5%
    DCS:4%
    DCT:5%
    7604.2 -Of aluminium alloys:  
    7604.21.00 --Hollow profiles 5%
    DCS:4%
    DCT:5%
    7604.29.00 --Other 5%
    DCS:4%
    DCT:5%
    7605 ALUMINIUM WIRE:  
    7605.1 -Of aluminium, not alloyed:  
    7605.11.00 --Of which the maximum cross-sectional dimension exceeds 7 mm 5%
    DCS:4%
    DCT:5%
    7605.19.00 --Other 5%
    DCS:4%
    DCT:5%
    7605.2 -Of aluminium alloys:  
    7605.21.00 --Of which the maximum cross-sectional dimension exceeds 7 mm 5%
    DCS:4%
    DCT:5%
    7605.29.00 --Other 5%
    DCS:4%
    DCT:5%
    7606 ALUMINIUM PLATES, SHEETS AND STRIP, OF A THICKNESS EXCEEDING 0.2 mm:  
    7606.1 -Rectangular (including square):  
    7606.11.00 --Of aluminium, not alloyed 5%
    DCS:4%
    DCT:5%
    7606.12.00 --Of aluminium alloys 5%
    DCS:4%
    DCT:5%
    7606.9 -Other:  
    7606.91.00 --Of aluminium, not alloyed 5%
    DCS:4%
    DCT:5%
    7606.92.00 --Of aluminium alloys 5%
    DCS:4%
    DCT:5%
    7607 ALUMINIUM FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKING MATERIALS) OF A THICKNESS (EXCLUDING ANY BACKING) NOT EXCEEDING 0.2 mm:  
    7607.1 -Not backed:  
    7607.11.00 --Rolled but not further worked 5%
    7607.19.00 --Other 5%
    7607.20.00 -Backed 5%
    7608 ALUMINIUM TUBES AND PIPES:  
    7608.10.00 -Of aluminium, not alloyed 5%
    DCS:4%
    DCT:5%
    7608.20.00 -Of aluminium alloys 5%
    DCS:4%
    DCT:5%
    7609.00.00 ALUMINIUM TUBE OR PIPE FITTINGS (FOR EXAMPLE, COUPLINGS, ELBOWS, SLEEVES) 5%
    7610 ALUMINIUM STRUCTURES (EXCLUDING PREFABRICATED BUILDINGS OF 9406) AND PARTS OF STRUCTURES (FOR EXAMPLE, BRIDGES AND BRIDGE-SECTIONS, TOWERS, LATTICE MASTS, ROOFS, ROOFING FRAMEWORKS, DOORS AND WINDOWS AND THEIR FRAMES AND THRESHOLDS FOR DOORS, BALUSTRADES, PILLARS AND COLUMNS); ALUMINIUM PLATES, RODS, PROFILES, TUBES AND THE LIKE, PREPARED FOR USE IN STRUCTURES:  
    7610.10.00 -Doors, windows and their frames and thresholds for doors 5%
    CA:Free
    7610.90.00 -Other 5%
    CA:Free
    7611.00.00 ALUMINIUM RESERVOIRS, TANKS, VATS AND SIMILAR CONTAINERS, FOR ANY MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED GAS), OF A CAPACITY EXCEEDING 300 L, WHETHER OR NOT LINED OR HEAT-INSULATED, BUT NOT FITTED WITH MECHANICAL OR THERMAL EQUIPMENT 5%
    7612 ALUMINIUM CASKS, DRUMS, CANS, BOXES AND SIMILAR CONTAINERS (INCLUDING RIGID OR COLLAPSIBLE TUBULAR CONTAINERS), FOR ANY MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED GAS), OF A CAPACITY NOT EXCEEDING 300 L, WHETHER OR NOT LINED OR HEAT-INSULATED, BUT NOT FITTED WITH MECHANICAL OR THERMAL EQUIPMENT:  
    7612.10.00 -Collapsible tubular containers Free
    7612.90.00 -Other 5%
    7613.00.00 ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS 5%
    7614 STRANDED WIRE, CABLES, PLAITED BANDS AND THE LIKE, OF ALUMINIUM, NOT ELECTRICALLY INSULATED:  
    7614.10.00 -With steel core 5%
    DCS:4%
    DCT:5%
    7614.90.00 -Other 5%
    DCS:4%
    DCT:5%
    7615 TABLE, KITCHEN OR OTHER HOUSEHOLD ARTICLES AND PARTS THEREOF, OF ALUMINIUM; POT SCOURERS AND SCOURING OR POLISHING PADS, GLOVES AND THE LIKE, OF ALUMINIUM; SANITARY WARE AND PARTS THEREOF, OF ALUMINIUM:  
    7615.10.00 -Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like 5%
    7615.20.00 -Sanitary ware and parts thereof 5%
    7616 OTHER ARTICLES OF ALUMINIUM:  
    7616.10.00 -Nails, tacks, staples (other than those of 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers and similar articles 5%
    7616.9 -Other:  
    7616.91.00 --Cloth, grill, netting and fencing, of aluminium wire 5%
    7616.99.00 --Other 5%

     View history note
    78 CHAPTER 78
    Lead and articles thereof
    Note.
  • (Repealed by No 91 of 2021)
    • Subheading Note.
  • 1. - In this Chapter " refined lead " means:
     
    Metal containing by weight at least 99.9% of lead, provided that the content by weight of any other element does not exceed the limit specified in the following table:
    •


    TABLE - Other elements
    TABLE - Other elements
    Element Limiting content % by weight
    Ag Silver 0.02
    As Arsenic 0.005
    Bi Bismuth 0.05
    Ca Calcium 0.002
    Cd Cadmium 0.002
    Cu Copper 0.08
    Fe Iron 0.002
    S Sulphur 0.002
    Sb Antimony 0.005
    Sn Tin 0.005
    Zn Zinc 0.002
    Other (for example Te), each 0.001


    7801 UNWROUGHT LEAD:  
    7801.10.00 -Refined lead Free
    7801.9 -Other:  
    7801.91.00 --Containing by weight antimony as the principal other element Free
    7801.99.00 --Other Free
    7802.00.00 LEAD WASTE AND SCRAP Free
    7804 LEAD PLATES, SHEETS, STRIP AND FOIL; LEAD POWDERS AND FLAKES:  
    7804.1 -Plates, sheets, strip and foil:  
    7804.11.00 --Sheets, strip and foil of a thickness (excluding any backing) not exceeding 0.2 mm Free
    7804.19.00 --Other Free
    7804.20.00 -Powders and flakes Free
    7806 OTHER ARTICLES OF LEAD:  
    7806.00.10 ---Goods, as follows:
    (a) lead bars, rods, profiles and wire;
    (b) lead tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves)     		Free
    7806.00.90 ---Other 5%

     View history note
    79 CHAPTER 79
    Zinc and articles thereof
    Note.
  • (Repealed by No 91 of 2021)
    • Subheading Note.
  • 1. - In this Chapter the following have the meanings hereby assigned to them:
  • (a) Zinc, not alloyed
     
    Metal containing by weight at least 97.5% of zinc.
  • (b) Zinc alloys
     
    Metallic substances in which zinc predominates by weight over each of the other elements, provided that the total content by weight of such other elements exceeds 2.5%.
  • (c) Zinc dust
     
    Dust obtained by condensation of zinc vapour, consisting of spherical particles which are finer than zinc powders. At least 80% by weight of the particles pass through a sieve with 63 micrometres (microns) mesh. It must contain at least 85% by weight of metallic zinc.
    •


    7901 UNWROUGHT ZINC:  
    7901.1 -Zinc, not alloyed:  
    7901.11.00 --Containing by weight 99.99% or more of zinc Free
    7901.12.00 --Containing by weight less than 99.99% of zinc Free
    7901.20.00 -Zinc alloys Free
    7902.00.00 ZINC WASTE AND SCRAP Free
    7903 ZINC DUST, POWDERS AND FLAKES:  
    7903.10.00 -Zinc dust Free
    7903.90.00 -Other Free
    7904.00.00 ZINC BARS, RODS, PROFILES AND WIRE Free
    7905.00.00 ZINC PLATES, SHEETS, STRIP AND FOIL Free
    7907 OTHER ARTICLES OF ZINC:  
    7907.00.10 ---Zinc tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves) Free
    7907.00.90 ---Other 5%

     View history note
    80 CHAPTER 80
    Tin and articles thereof
    Note.
  • (Repealed by No 91 of 2021)
    • Subheading Note.
  • 1. - In this Chapter the following have the meanings hereby assigned to them:
  • (a) Tin, not alloyed
     
    Metal containing by weight at least 99% of tin, provided that the content by weight of any bismuth or copper is less than the limit specified in the following table:


    • TABLE - Other elements
    TABLE - Other elements
    Element Limiting content % by weight
    Bi Bismuth 0.1
    Cu Copper 0.4

  • (b) Tin alloys
     
    Metallic substances in which tin predominates by weight over each of the other elements, provided that:
  • (i) the total content by weight of such other elements exceeds 1%; or
  • (ii) the content by weight of either bismuth or copper is equal to or greater than the limit specified in the foregoing table.


    • 8001 UNWROUGHT TIN:  
    8001.10.00 -Tin, not alloyed Free
    8001.20.00 -Tin alloys Free
    8002.00.00 TIN WASTE AND SCRAP Free
    8003.00.00 TIN BARS, RODS, PROFILES AND WIRE Free
    8007.00.00 OTHER ARTICLES OF TIN Free

     View history note
    81 CHAPTER 81
    Other base metals; cermets; articles thereof
    Subheading Note.
  • (Repealed by No 91 of 2021)


    • 8101 TUNGSTEN (WOLFRAM) AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP:  
    8101.10.00 -Powders Free
    8101.9 -Other:  
    8101.94.00 --Unwrought tungsten, including bars and rods obtained simply by sintering Free
    8101.96.00 --Wire Free
    8101.97.00 --Waste and scrap Free
    8101.99.00 --Other Free
    8102 MOLYBDENUM AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP:  
    8102.10.00 -Powders Free
    8102.9 -Other:  
    8102.94.00 --Unwrought molybdenum, including bars and rods obtained simply by sintering Free
    8102.95.00 --Bars and rods, other than those obtained simply by sintering, profiles, plates, sheets, strip and foil Free
    8102.96.00 --Wire Free
    8102.97.00 --Waste and scrap Free
    8102.99.00 --Other Free
    8103 TANTALUM AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP:  
    8103.20.00 -Unwrought tantalum, including bars and rods obtained simply by sintering; powders Free
    8103.30.00 -Waste and scrap Free
    8103.9 -Other:  
    8103.91.00 --Crucibles Free
    8103.99.00 --Other Free
    8104 MAGNESIUM AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP:  
    8104.1 -Unwrought magnesium:  
    8104.11.00 --Containing at least 99.8% by weight of magnesium Free
    8104.19.00 --Other Free
    8104.20.00 -Waste and scrap Free
    8104.30.00 -Raspings, turnings and granules, graded according to size; powders Free
    8104.90.00 -Other Free
    8105 COBALT MATTES AND OTHER INTERMEDIATE PRODUCTS OF COBALT METALLURGY; COBALT AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP:  
    8105.20.00 -Cobalt mattes and other intermediate products of cobalt metallurgy; unwrought cobalt; powders Free
    8105.30.00 -Waste and scrap Free
    8105.90.00 -Other Free
    8106 BISMUTH AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP:
    8106.10.00 -Containing more than 99.99% of bismuth, by weight Free
    8106.90.00 -Other Free
    8107 - 8107.90.00 (Repealed by No 91 of 2021)  
    8108 TITANIUM AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP:  
    8108.20.00 -Unwrought titanium; powders Free
    8108.30.00 -Waste and scrap Free
    8108.90.00 -Other Free
    8109 ZIRCONIUM AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP:  
    8109.2 -Unwrought zirconium; powders:
    8109.21.00 --Containing less than 1 part hafnium to 500 parts zirconium by weight Free
    8109.29.00 --Other Free
    8109.3 -Waste and scrap:  
    8109.31.00 --Containing less than 1 part hafnium to 500 parts zirconium by weight Free
    8109.39.00 --Other Free
    8109.9 -Other:  
    8109.91.00 --Containing less than 1 part hafnium to 500 parts zirconium by weight Free
    8109.99.00 --Other Free
    8110 ANTIMONY AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP:  
    8110.10.00 -Unwrought antimony; powders Free
    8110.20.00 -Waste and scrap Free
    8110.90.00 -Other Free
    8111.00.00 MANGANESE AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP Free
    8112 BERYLLIUM, CHROMIUM, HAFNIUM, RHENIUM, THALLIUM, CADMIUM, GERMANIUM, VANADIUM, GALLIUM, INDIUM AND NIOBIUM (COLUMBIUM), AND ARTICLES OF THESE METALS, INCLUDING WASTE AND SCRAP:  
    8112.1 -Beryllium:  
    8112.12.00 --Unwrought; powders Free
    8112.13.00 --Waste and scrap Free
    8112.19.00 --Other Free
    8112.2 -Chromium:  
    8112.21.00 --Unwrought; powders Free
    8112.22.00 --Waste and scrap Free
    8112.29.00 --Other Free
    8112.3 -Hafnium:
    8112.31.00 --Unwrought; waste and scrap; powders Free
    8112.39.00 --Other Free
    8112.4 -Rhenium:  
    8112.41.00 --Unwrought; waste and scrap; powders Free
    8112.49.00 --Other Free
    8112.5 -Thallium:  
    8112.51.00 --Unwrought; powders Free
    8112.52.00 --Waste and scrap Free
    8112.59.00 --Other Free
    8112.6 -Cadmium:
    8112.61.00 --Waste and scrap Free
    8112.69.00 --Other Free
    8112.9 -Other:  
    8112.92.00 --Unwrought; waste and scrap; powders Free
    8112.99.00 --Other Free
    8113.00.00 CERMETS AND ARTICLES THEREOF, INCLUDING WASTE AND SCRAP Free

     View history note
    82 CHAPTER 82
    Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal
    Notes.
  • 1. - Apart from blow lamps, portable forges, grinding wheels with frameworks, manicure or pedicure sets, and goods of 8209.00.00, this Chapter covers only articles with a blade, working edge, working surface or other working part of:
  • (a) Base metal;
  • (b) Metal carbides or cermets;
  • (c) Precious or semi-precious stones (natural, synthetic or reconstructed) on a support of base metal, metal carbide or cermet; or
  • (d) Abrasive materials on a support of base metal, provided that the articles have cutting teeth, flutes, grooves, or the like, of base metal, which retain their identity and function after the application of the abrasive.
  • 2. - Parts of base metal of the articles of this Chapter are to be classified with the articles of which they are parts, except parts separately specified as such and tool-holders for hand tools (8466). However, parts of general use as defined in Note 2 to Section XV are in all cases excluded from this Chapter.
     
    Heads, blades and cutting plates for electric shavers or electric hair clippers are to be classified in 8510.
  • 3. - Sets consisting of one or more knives of 8211 and at least an equal number of articles of 8215 are to be classified in 8215.


    • 8201 HAND TOOLS, THE FOLLOWING: SPADES, SHOVELS, MATTOCKS, PICKS, HOES, FORKS AND RAKES; AXES, BILL HOOKS AND SIMILAR HEWING TOOLS; SECATEURS AND PRUNERS OF ANY KIND; SCYTHES, SICKLES, HAY KNIVES, HEDGE SHEARS, TIMBER WEDGES AND OTHER TOOLS OF A KIND USED IN AGRICULTURE, HORTICULTURE OR FORESTRY:  
    8201.10.00 -Spades and shovels 5%
    8201.30.00 -Mattocks, picks, hoes and rakes Free
    8201.40.00 -Axes, bill hooks and similar hewing tools 5%
    8201.50.00 -Secateurs and similar one-handed pruners and shears (including poultry shears) Free
    8201.60.00 -Hedge shears, two-handed pruning shears and similar two-handed shears Free
    8201.90.00 -Other hand tools of a kind used in agriculture, horticulture or forestry 5%
    8202 HAND SAWS; BLADES FOR SAWS OF ALL KINDS (INCLUDING SLITTING, SLOTTING OR TOOTHLESS SAW BLADES):  
    8202.10.00 -Hand saws Free
    8202.20.00 -Band saw blades 5%
    8202.3 -Circular saw blades (including slitting or slotting saw blades):  
    8202.31.00 --With working part of steel 5%
    8202.39.00 --Other, including parts 5%
    8202.40.00 -Chain saw blades Free
    8202.9 -Other saw blades:  
    8202.91.00 --Straight saw blades, for working metal 5%
    8202.99.00 --Other 5%
    8203 FILES, RASPS, PLIERS (INCLUDING CUTTING PLIERS), PINCERS, TWEEZERS, METAL CUTTING SHEARS, PIPE-CUTTERS, BOLT CROPPERS, PERFORATING PUNCHES AND SIMILAR HAND TOOLS:  
    8203.10.00 -Files, rasps and similar tools 5%
    CA:Free
    8203.20.00 -Pliers (including cutting pliers), pincers, tweezers and similar tools 5%
    8203.30.00 -Metal cutting shears and similar tools 5%
    8203.40.00 -Pipe-cutters, bolt croppers, perforating punches and similar tools 5%
    8204 HAND-OPERATED SPANNERS AND WRENCHES (INCLUDING TORQUE METER WRENCHES BUT NOT INCLUDING TAP WRENCHES); INTERCHANGEABLE SPANNER SOCKETS, WITH OR WITHOUT HANDLES:  
    8204.1 -Hand-operated spanners and wrenches:  
    8204.11.00 --Non-adjustable 5%
    8204.12.00 --Adjustable 5%
    8204.20.00 -Interchangeable spanner sockets, with or without handles 5%
    8205 HAND TOOLS (INCLUDING GLAZIERS ' DIAMONDS), NOT ELSEWHERE SPECIFIED OR INCLUDED; BLOW LAMPS; VICES, CLAMPS AND THE LIKE, OTHER THAN ACCESSORIES FOR AND PARTS OF, MACHINE-TOOLS OR WATER-JET CUTTING MACHINES; ANVILS; PORTABLE FORGES; HAND- OR PEDAL-OPERATED GRINDING WHEELS WITH FRAMEWORKS:  
    8205.10.00 -Drilling, threading or tapping tools 5%
    8205.20.00 -Hammers and sledge hammers Free
    8205.30.00 -Planes, chisels, gouges and similar cutting tools for working wood 5%
    8205.40.00 -Screwdrivers Free
    8205.5 -Other hand tools (including glaziers ' diamonds):  
    8205.51.00 --Household tools 5%
    8205.59.00 --Other 5%
    8205.60.00 -Blow lamps Free
    8205.70.00 -Vices, clamps and the like 5%
    8205.90.00 -Other, including sets of articles of two or more subheadings of this heading 5%
    8206.00.00 TOOLS OF TWO OR MORE OF 8202 TO 8205, PUT UP IN SETS FOR RETAIL SALE 5%
    8207 INTERCHANGEABLE TOOLS FOR HAND TOOLS, WHETHER OR NOT POWER-OPERATED, OR FOR MACHINE-TOOLS (FOR EXAMPLE, FOR PRESSING, STAMPING, PUNCHING, TAPPING, THREADING, DRILLING, BORING, BROACHING, MILLING, TURNING OR SCREWDRIVING), INCLUDING DIES FOR DRAWING OR EXTRUDING METAL, AND ROCK DRILLING OR EARTH BORING TOOLS:  
    8207.1 -Rock drilling or earth boring tools:  
    8207.13.00 --With working part of cermets 5%
    DCS:4%
    CA:Free
    DCT:5%
    8207.19.00 --Other, including parts 5%
    DCS:4%
    CA:Free
    DCT:5%
    8207.20.00 -Dies for drawing or extruding metal 5%
    8207.30.00 -Tools for pressing, stamping or punching 5%
    8207.40.00 -Tools for tapping or threading 5%
    8207.50.00 -Tools for drilling, other than for rock drilling 5%
    8207.60.00 -Tools for boring or broaching 5%
    8207.70.00 -Tools for milling 5%
    8207.80.00 -Tools for turning 5%
    8207.90.00 -Other interchangeable tools 5%
    CA:Free
    8208 KNIVES AND CUTTING BLADES, FOR MACHINES OR FOR MECHANICAL APPLIANCES:  
    8208.10.00 -For metal working 5%
    8208.20.00 -For wood working 5%
    8208.30.00 -For kitchen appliances or for machines used by the food industry 5%
    8208.40 -For agricultural, horticultural or forestry machines:  
    8208.40.10 ---Designed for use with wood chipping machines 5%
    8208.40.90 ---Other Free
    8208.90.00 -Other 5%
    8209.00.00 PLATES, STICKS, TIPS AND THE LIKE FOR TOOLS, UNMOUNTED, OF CERMETS Free
    8210.00.00 HAND-OPERATED MECHANICAL APPLIANCES, WEIGHING 10 kg OR LESS, USED IN THE PREPARATION, CONDITIONING OR SERVING OF FOOD OR DRINK 5%
    DCS:4%
    DCT:5%
    8211 KNIVES WITH CUTTING BLADES, SERRATED OR NOT (INCLUDING PRUNING KNIVES), OTHER THAN KNIVES OF 8208, AND BLADES THEREFOR:  
    8211.10.00 -Sets of assorted articles Free
    8211.9 -Other:  
    8211.91.00 --Table knives having fixed blades Free
    8211.92 --Other knives having fixed blades:  
    8211.92.10 ---Kitchen knives, butchers ' knives and slaughtermen ' s knives Free
    8211.92.90 ---Other 5%
    DCS:Free
    8211.93.00 --Knives having other than fixed blades Free
    8211.94 --Blades:  
    8211.94.10 ---For table knives, kitchen knives, butchers ' knives and slaughtermen ' s knives 5%
    8211.94.90 ---Other 5%
    DCS:Free
    8211.95 --Handles of base metal:  
    8211.95.10 ---For table knives, kitchen knives, butchers ' knives and slaughtermen ' s knives 5%
    8211.95.90 ---Other 5%
    DCS:Free
    8212 RAZORS AND RAZOR BLADES (INCLUDING RAZOR BLADE BLANKS IN STRIPS):  
    8212.10.00 -Razors Free
    8212.20.00 -Safety razor blades, including razor blade blanks in strips Free
    8212.90.00 -Other parts Free
    8213.00.00 SCISSORS, TAILORS ' SHEARS AND SIMILAR SHEARS, AND BLADES THEREFOR Free
    8214 OTHER ARTICLES OF CUTLERY (FOR EXAMPLE, HAIR CLIPPERS, BUTCHERS ' OR KITCHEN CLEAVERS, CHOPPERS AND MINCING KNIVES, PAPER KNIVES); MANICURE OR PEDICURE SETS AND INSTRUMENTS (INCLUDING NAIL FILES):  
    8214.10.00 -Paper knives, letter openers, erasing knives, pencil sharpeners and blades therefor Free
    8214.20.00 -Manicure or pedicure sets and instruments (including nail files) Free
    8214.90.00 -Other Free
    8215 SPOONS, FORKS, LADLES, SKIMMERS, CAKE-SERVERS, FISH-KNIVES, BUTTER-KNIVES, SUGAR TONGS AND SIMILAR KITCHEN OR TABLEWARE:  
    8215.10.00 -Sets of assorted articles containing at least one article plated with precious metal 5%
    8215.20.00 -Other sets of assorted articles Free
    8215.9 -Other:  
    8215.91.00 --Plated with precious metal 5%
    8215.99.00 --Other 5%

     View history note
    83 CHAPTER 83
    Miscellaneous articles of base metal
    Notes.
  • 1. - For the purposes of this Chapter, parts of base metal are to be classified with their parent articles. However, articles of iron or steel of 7312, 7315, 7317, 7318 or 7320, or similar articles of other base metal (Chapters 74 to 76 and 78 to 81) are not to be taken as parts of articles of this Chapter.
  • 2. - For the purposes of 8302, " castors " means those having a diameter (including, where appropriate, tyres) not exceeding 75 mm, or those having a diameter (including, where appropriate, tyres) exceeding 75 mm provided that the width of the wheel or tyre fitted thereto is less than 30 mm.
    • Additional Note.
  • 1. - Heading 8302 does not include plates, rods, angles, shapes, sections, tubes, pipes and the like, requiring further modification before use, including, but not limited to, cutting, drilling and bending.


    • 8301 PADLOCKS AND LOCKS (KEY, COMBINATION OR ELECTRICALLY OPERATED), OF BASE METAL; CLASPS AND FRAMES WITH CLASPS, INCORPORATING LOCKS, OF BASE METAL; KEYS FOR ANY OF THE FOREGOING ARTICLES, OF BASE METAL:  
    8301.10.00 -Padlocks Free
    8301.20.00 -Locks of a kind used for motor vehicles 5%
      From 1 January 2005 10%
    DC:5%
      From 1 January 2010 5%
    8301.30.00 -Locks of a kind used for furniture 5%
    8301.40.00 -Other locks 5%
    8301.50.00 -Clasps and frames with clasps, incorporating locks Free
    8301.60.00 -Parts 5%
    8301.70.00 -Keys presented separately 5%
    CA:Free
    8302 BASE METAL MOUNTINGS, FITTINGS AND SIMILAR ARTICLES SUITABLE FOR FURNITURE, DOORS, STAIRCASES, WINDOWS, BLINDS, COACHWORK, SADDLERY, TRUNKS, CHESTS, CASKETS OR THE LIKE; BASE METAL HAT-RACKS, HAT-PEGS, BRACKETS AND SIMILAR FIXTURES; CASTORS WITH MOUNTINGS OF BASE METAL; AUTOMATIC DOOR CLOSERS OF BASE METAL:  
    8302.10.00 -Hinges 5%
      From 1 January 2005 10%
    DC:5%
      From 1 January 2010 5%
    8302.20.00 -Castors 5%
    8302.30.00 -Other mountings, fittings and similar articles suitable for motor vehicles 5%
      From 1 January 2005 10%
    DC:5%
      From 1 January 2010 5%
    8302.4 -Other mountings, fittings and similar articles:  
    8302.41.00 --Suitable for buildings 5%
    8302.42.00 --Other, suitable for furniture 5%
    8302.49.00 --Other 5%
    8302.50.00 -Hat-racks, hat-pegs, brackets and similar fixtures 5%
    8302.60.00 -Automatic door closers Free
    8303.00.00 ARMOURED OR REINFORCED SAFES, STRONG-BOXES AND DOORS AND SAFE DEPOSIT LOCKERS FOR STRONG-ROOMS, CASH OR DEED BOXES AND THE LIKE, OF BASE METAL 5%
    8304.00.00 FILING CABINETS, CARD-INDEX CABINETS, PAPER TRAYS, PAPER RESTS, PEN TRAYS, OFFICE-STAMP STANDS AND SIMILAR OFFICE OR DESK EQUIPMENT, OF BASE METAL, OTHER THAN OFFICE FURNITURE OF 9403 5%
    8305 FITTINGS FOR LOOSE-LEAF BINDERS OR FILES, LETTER CLIPS, LETTER CORNERS, PAPER CLIPS, INDEXING TAGS AND SIMILAR OFFICE ARTICLES, OF BASE METAL; STAPLES IN STRIPS (FOR EXAMPLE, FOR OFFICES, UPHOLSTERY, PACKAGING), OF BASE METAL:  
    8305.10.00 -Fittings for loose-leaf binders or files Free
    8305.20.00 -Staples in strips 5%
    8305.90.00 -Other, including parts Free
    8306 BELLS, GONGS AND THE LIKE, NON-ELECTRIC, OF BASE METAL; STATUETTES AND OTHER ORNAMENTS, OF BASE METAL; PHOTOGRAPH, PICTURE OR SIMILAR FRAMES, OF BASE METAL; MIRRORS OF BASE METAL:  
    8306.10.00 -Bells, gongs and the like 5%
    8306.2 -Statuettes and other ornaments:  
    8306.21.00 --Plated with precious metal 5%
    8306.29.00 --Other 5%
    8306.30.00 -Photograph, picture or similar frames; mirrors 5%
    8307 FLEXIBLE TUBING OF BASE METAL, WITH OR WITHOUT FITTINGS:  
    8307.10.00 -Of iron or steel 5%
    8307.90.00 -Of other base metal 5%
    8308 CLASPS, FRAMES WITH CLASPS, BUCKLES, BUCKLE-CLASPS, HOOKS, EYES, EYELETS AND THE LIKE, OF BASE METAL, OF A KIND USED FOR CLOTHING OR CLOTHING ACCESSORIES, FOOTWEAR, JEWELLERY, WRIST-WATCHES, BOOKS, AWNINGS, LEATHER GOODS, TRAVEL GOODS OR SADDLERY OR FOR OTHER MADE UP ARTICLES; TUBULAR OR BIFURCATED RIVETS, OF BASE METAL; BEADS AND SPANGLES, OF BASE METAL:  
    8308.10.00 -Hooks, eyes and eyelets 5%
    8308.20.00 -Tubular or bifurcated rivets 5%
    8308.90.00 -Other, including parts 5%
    8309 STOPPERS, CAPS AND LIDS (INCLUDING CROWN CORKS, SCREW CAPS AND POURING STOPPERS), CAPSULES FOR BOTTLES, THREADED BUNGS, BUNG COVERS, SEALS AND OTHER PACKING ACCESSORIES, OF BASE METAL:  
    8309.10.00 -Crown corks 5%
    8309.90.00 -Other 5%
    8310.00.00 SIGN-PLATES, NAME-PLATES, ADDRESS-PLATES AND SIMILAR PLATES, NUMBERS, LETTERS AND OTHER SYMBOLS, OF BASE METAL, EXCLUDING THOSE OF 9405 5%
    8311 WIRE, RODS, TUBES, PLATES, ELECTRODES AND SIMILAR PRODUCTS, OF BASE METAL OR OF METAL CARBIDES, COATED OR CORED WITH FLUX MATERIAL, OF A KIND USED FOR SOLDERING, BRAZING, WELDING OR DEPOSITION OF METAL OR OF METAL CARBIDES; WIRE AND RODS, OF AGGLOMERATED BASE METAL POWDER, USED FOR METAL SPRAYING:  
    8311.10.00 -Coated electrodes of base metal, for electric arc-welding 5%
    DCS:4%
    DCT:5%
    8311.20.00 -Cored wire of base metal, for electric arc-welding 5%
    DCS:4%
    DCT:5%
    8311.30.00 -Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame 5%
    DCS:4%
    DCT:5%
    8311.90.00 -Other Free

     View history note


    View full documentView full documentBack to top

    This information is provided by CCH Australia Limited Link opens in new window. View the disclaimer and notice of copyright.